PROVN DIESEL GENERATOR SET FOR STAND POWER SUPPLY TO SECURITY LIGHT AT 147 LT REGT UNDER GE DEHU ROAD

Amount

Supply and installation of silent Diesel Engine driven generating set 62.5 KVA Water Cooled producing 83 BHP @ 1500 RPM with 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 4722BS EN 60034-1 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. mounted on a Base Frame. Along with:- (a) AMF-AType Control Panel (b) Fuel tank (c ) Battery with leads (d) First fill of oil (e) Engine safeties & protections (f) Anti vibration mounting pads (g) Acoustic Enclosure suitable for 62.5 kVA DG Set. Latest CPCB Norms.of capacity upto 62.5 KVA. Make: Engine:- Kirloskar, Cummins, Ashok Leyland. Alternator: Stamford,Kirloskar, Ashok leyland Engine: Four Cylinders Inline, Liquid Cooled, Turbocharged and Developing 83 hp @ 1500 RPM. Diesel Engines are with Electric Start, Compression Ignition, 4 Stroke Cycle ,Designed to run continuously at 1500 RPM . It confirms to IS 10002, ISO-3046, BS 5514 standards. Alternator: Alternator, suitable for continuous duty operations rated at 1500 RPM 415 V, 0.8 PF, 50Hz, 3Ph. in SPDP Enclosure, Self- Excited & Self- regulated, Brush less, ‘H’ class Insulation, Floor mounted with anti frication Shielded Ball Bearing on end. The alternator conforms to IS: 4722, BS EN 60034-1 suitable for tropical conditions. OTHER ACCESSORIES: (i)Radiator with Fan. (ii)Fuel Injection Equipments with Mechanical Governor. (iii) Dry type Air Cleaner. (iv) Exhaust Silencer. (v) Lube Oil filter (Spin On Type. (vi) Fuel Oil filter (Spin On Type). (vii) 12V Electric starting system. (viii)Battery charging alternator. (viii) Stop Solenoid. (ix) Cylinder Head temperature Gauge. (x)Battery Voltage. (xi) First Fill Lube Oil. BASE FRAME:- Suitable to couple above Engine & Alternator made from steel sheet metal. FUEL TANK : 8 Hrs Capacity for continuous running, with Diesel fuel Inlet & Outlet, Air Vent & Drain plug arrangements. BATTERY:-1 No.12 V Battery with Leads STANDARD GENSET CONTROLLER UNIT WITH CONTROL PANEL: Controller unit with totally enclosed, Steel Construction Control Panel suitable for indoor floor / wall mounting installation having following safeties and display parameters. ACOUSTIC ENCLOSURE: (i)The Enclosure is modular in construction. (ii) Base Frame is made of Sheet metal. (iii) Durable industrial locking system is provided on Doors. (iv) Door Gaskets are made in high quality EPDM material.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanised iron earth strip 25 x 3mm as earthing lead by means of bolts, nuts and washers, check nuts made out of galvanized iron or steel all as shown on electrical plate No.5 of SSR Part-I connected to earthing test point complete all as specified directed.

Supply and lay underground cable XLPE insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade, fixed on pole, wall and trenches of sizes 3.5 core 50 sqmm.

Excavation in trenches not exc 1.5 mtr wide and exc 1.5 mtr in depth and getting out in in soft /loose soil for foundation of poles

Returning filling in , excluding spreading, levelling, watering and well ramming in layers not exc 25cms each

M & L in repair HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the size of cable40 mm dia Make:-Infra/Supreme/Prince

Removal of Excavated material n.exc 50 Mtr and deposting where directed at level n exc 1.5 mtr above the statring point

DIVYA ELECTRIC CORPOORATION