Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAccepted-AOC ANWALKHEDA MR | ₹1.0 Cr | L1 | Accepted-AOC Accepted at 23.04 percent Below |
| 2 | L2₹1.0 CrRejected-Finance 29 NEAR AKASHPURAM COLONY JAGATPUR LALA BEGAM SIDDIQUE ENCLAVE BAREILLY | BAREILLY | BAREILLY | UTTAR PRADESH | ₹1.0 Cr | L2 | Rejected-Finance Being Higher |
| 3 | L3₹1.2 CrRejected-Finance | ₹1.2 Cr | L3 | Rejected-Finance Being Higher |
| 4 | L4₹1.3 CrRejected-Finance S 3 17 GREATER GREEN PARK BISALPUR ROAD BAREILLY | BAREILLY | BAREILLY | UTTAR PRADESH | ₹1.3 Cr | L4 | Rejected-Finance Being Higher |
Tender Value
₹1.4 Cr
EMD Value
₹9.3 L
Closing Date
21 Mar 2026, 12:00 pmClosed
S E Bareilly Circle, P.W.D., Bareilly
S E Bareilly Circle, P.W.D., Bareilly
Construction work of 4 x 4 M 5 cell box culvert in place of the old damaged mini bridge, approach road and additional approach road on the Madhya Gora drain of Bhadrak Bhudia Uda in Bareilly district. FY 2025-26
2026_CEBLY_1125836_1
1934/413 C(E-Tender)-3/2025-26 Dated 09.03.2026
Open Tender
Civil Works - Bridges
120 days
Bareilly
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,725
₹9.3 L
Yes
S E Bareilly Circle, P.W.D., Bareilly
24 Apr 2026
16 Mar 2026
21 Mar 2026
16 Mar 2026
21 Mar 2026
16 Mar 2026
18 Mar 2026
Construction of embankment with approved material obtained from side borrow pitsof road with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100.0 m as per Technical Specification Clause 301.5
Construction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 402
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405)
Providing and applying primer coat with Bitumen emulsion (SS-2) on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 502.
Providing and applying tack coat with Bitumen VG-10 using Bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 508)
Providing and laying seal coat by manual means with VG-10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.
Earthwork in Patri Construction of shoulders with approved material obtained from borrow pits with all lifts and 1 km leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Including royalty.
Brick edging on both sides of the road of first class bricks 8 cm (3") wide and 12 cm. 4½"deep laid with mud mortar including labour and supply of. bricks finished to required template and proper alignment and also including dressing and ramming the excavated earth as directed by Engineer-in-Charge.
Brick on edge pavement on patries with bricks laid dry, joints filled with local sand including preparation of base to proper slope and its ramming, spreading a layer of 1 cm. 3/8" depth of local sand over the subgrade & including supply of all materials.
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
Construction of Un reinforced dowel jointed at expension and construction joint only,plain cement concrete pavement thickness as per design over aprepared sub base with 43 grade cement M 30 grade coarse and fine agg conforming to IS 383 max size of coarse agg not exceeding 25 mm mixed in a concretemixer of not less then 0.2 cum capacity and appropriate way batcher using approved mix design , laid in approved fixed side foam work (steel channel), laying and fixing of 125 micron thick polythene , wages, steel plate including levelling foam work as per drawing , spreading concrete with showels , rakes, compacted using needle , plate vibrator and finished in continious operation including provision of contraction and expension , construction joints , primer sealent , dowel bars for 14 days curing compound and water finishing to lines and grade as per drawing and tech specification clause1501.
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres
Earth work in excavation of foundation of structure as per drawing and technical specification including setingout, construction of shoring and bracing renewal of stumps dressing of side and bottom back filling the extra earth to required.
Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.
Sand Filling in Foundation Trenches as per Drawing & Technical Specification
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.(Grade M-30)
Supplying, Fitting and Placing HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications
Drainage Spouts complete as per drawing and Technical specification
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301
Providing and laying filter material underneath pitching in slopes using Stone spalls of required size 40 mm avg size complete as per drawing and technical specifications
Providing and laying stone boulder pitching using 25-60 kg stone boulder on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications .
Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per technical specitication clause 302.3
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M15)
Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1202&1203
Providing and laying 1000 mm reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in Single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry
Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 ( M20)
Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.67 MB
T2Bridge.pdf
Tender Documents • 3.19 MB
BOQ_2099046.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid