46/2022-23/EDC Increasing load capacity of overloaded Transformer under Scheme Nagar Nikay, EDD-I, Rampur(Semi Trunky basis)

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

LT Cable 3.5X150 Sqmm

Cartage of Healty Transformer from store to site, dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles (including connection) and loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded TF by Separate 250 KVA trasnformer

Increasing load capacity of overloaded TF by Separate 400 KVA trasnformer

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

11 Mtr Long ST Pole.

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

11 Mtr Long ST Pole.

Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs

Providing & fixing of 11 KV Pin Insulator with Pin

Providing & fixing of 11 KV Disc Insulator

Construction of plinth for Healthy 400 KVA transformer and grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc.

Construction of plinth for Healthy 250 KVA transformer and grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc.

Laying ,stringing and binding of LT Cable 3.5X150 Sqmm as per RESPO Norms and as per direction of Supervising Engineer.

Providing & Installing of 11 KV TPMO set with fitting by providing of bolt and nuts as per RESPO Norms and as per direction of Supervising Engineer.

Providing fiber Mesh & Fixing/fencing sourrounding 400 KVA Transformer

Providing fiber Mesh & Fixing/fencing sourrounding 250 KVA Transformer

Providing and fixing GM Connector

Providing T-Off Channel

Providing Top Channel 125x65

Providing ST Pole 11 Mtr. Long

Providing Stay & Stay Wire.

Providing Earthing Rod & Earthing Wire.

M/s Charley Enterprises

S A TRADERS