MAINT OF INTERNAL ELECTRIFICATION IN MD/OTM ACCN AT CERTAIN BUILDINDS AT CHAUBATTIA UNDER GE RANIKHET

Amount

BOQ ( Sch A ) Internal Electric works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, sockets, lamp holders, brackets, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and white / colour wash etc. complete all as specified and directed.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No 2 here in before but one light point controlled by two 2- way switch

All as per item No 2 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 2 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on indipendent board..

All as per item No 2 here in before but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 15/16 Amp on independent board.

Supply & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into existing conduit and terminal boxes and matching the existing surface mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated Bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No 7 here in before but one light point controlled by two 2- way switch

All as per item No 7 here in before but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 7 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No. 7 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 15/16 Amp on independent board.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No 12 here in before but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 12 here in before but one socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No. 12 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 1.50 Sqmm size copper wire for one 6 pin socket outlet, 15/16 Amp on independent board.

Supply and fixing of switch piano flush type single pole one-way 5/6Amp complete all as specified and directed.

Supply and fixing of switch piano flush type single pole Two way 5/6 Amp complete all as specified and directed.

Supply and fixing of switch piano flush type single pole one-way 15/16 Amp complete all as specified and directed.

Supply and fixing of socket outlet 5/6 Amp, 5 pin , flush type complete all as specified and directed.

Supply and fixing of socket outlet 2-in-1, 3 pin 5/6 and 15/16 Amp flush type, complete all as specified and directed.

Supply and fixing of lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply and fixing of ceiling rose, PVC / polycarbonate isolated body three terminal complete all as specified and directed.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole complete all as specified and directed.

Supply and fixing of bell push, flush type, single pole 5 amps complete all as specified and directed.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning including taking down complete all as specified and directed.

Supply & Fixing in repair 240 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of Double pole( DP) and current carrying capacity 40 TO 63 AMP, in the MCB DB complete with connection testing and commissioning ncluding taking down complete all as specified and directed.

Supply & Fixing in repair 415 V, 10 KA 'B' curve miniature circiut breaker ( MCB) of TPN/FP and current carrying capacity 40 TO 100AMP, in the MCB DB complete with connection testing and commissioning ncluding taking down complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 4 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 Amp rated bus bar, 240 volts including blanking plates fixed sunk / flush to the wall or niche complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, triple pole and neutral, 4 ways with 200 Amp rated bus bar, 415 volts fincluding blanking platesixed sunk / flush to the wall or niche complete all as specified and directed.

Material & labour for sub main wiring with 1100 volt grade two single core PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm (FRLS) drawn into and including electrical grade PVC conduit not less than 25 mm dia with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour including taking down existing unserviceable sub main wiring complete all as specified and directed. NOTE: (Note :- 2 runs of 6 sqmm single cable, one run of 6 sqmm earth wire cable and PVC conduit shall be considered as one unit/1Rm)

Material and Labour for replacing insulation deteriorated PVC insulated twin core flat 16 Sqmm, 1100 Volts grade heavy duty stranded aluminium, conductor cable in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI wire including taking down complete all as specified and as directed.

Supply and fixing in replacement High quality indoor LED LED T8 tube rod 20 Watt (with inbuiled driver) with single core connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified and directed.

Supply and fixing High quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuiled driver) complete all as specified and directed.

. Supply and fixing LED luminaire 600mmx600mm, 36 watt, 220 volt, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including necessary cutting as required in panel and connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified & directed.

Supply & Fixing Recess mounting LED 300x300 luminaire,18 W, 230v, suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & Fixing LED bulk head fitting, 1x10 watt with PDC aluminium housing and milky diffuser with all accessories and including connecting up with twin core twisted flexible copper conductor cable suitable size of 230 volts, 50 HZ complete all as specified and directed.

Supply & Fixing high quality LED lighting fixture mirror type with high output diffuser 2 feet 1x5 watt 220V AC, complete with polycarbonate tube, white/ warm white suitable for mirror light internall prewired of 1.5 sqmm three core flexible cable complete all as specified and directed.

Supply & Fixing Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories including, cutting, opening through bricks/ stone wall for fixing in openings , grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair of fan parts like wings and body with suitable size nut bolts and wire complete all as specified and directed.

Material & Labour for repair of refrigerator/deep freezer of any size including repairing of damaged body and refilling of gas of freezer and repalcement of defective parts and accessories including complete servicing and testing after repair as specified and directed.

Supply & Fixing LED post top latern (20 watt) suitable for gate light with diffuser and painted aluminium deflector complete with all accessories and base plate including PCC work (1:3:6, type C1 ) for fixing the light fitting and connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. Make :- C&S Cat part No LTGLC20WHPLED//W or equivalent cat part in make specified in particular specification.

Supply and fixing High quality LED T5 integrated batten tube light 20 watt with aluminium extrusion with frosted PMMA/PC diffuser, internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fixing High quality LED T8 indoor batten tube light 20 watt with aluminium extrusion in D shaped have large diametre for increased convection heat transfer including one LED PC tube rod and driver, internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fixing in replacement building security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

Supply and fixing Wall Bracket Lanterns with B22 brass holder and aluminium cover suitable for 9 watt LED bulb, cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window covers, including all fittings (Total length 378 mm and projection breadth 210 mm and base 134 mm x 101 mm) for wall mounting and LED bulb 9 W as per Cat. Part No.WBL-04 of make Mepro Electrical or equivalent cat part in make specified in particular specificationcomplete all as specified and directed.

Supply and fixing Wall Bracket Lanterns with B22 brass holder and aluminium cover suitable for 9 watt LED bulb, cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window covers, including all fittings (Total length 508 mm and projection breadth 355 mm and base 220 mm x 101 mm) for wall mounting and LED bulb 9 W as per Cat. Part No.WBL-16 of make Mepro Electrical or equivalent cat part in make specified in particular specificationcomplete all as specified and directed.

Supply and fixing Wall Brass Bracket (double light) Lanterns black nickel plated finish with 130mm x 95mm decorative oval shape base , two brass arms 305mm length, both tipped with decorative brass leaf and provided with 52mm length x 34 mm Dia, galleries with flower at top and with 2 pin brass holders inside and 155mmx 129mm frosted glass shades including all fittings for wall mounting and LED bulb 5 W as per Cat. Part No.WBL-MBBD-900 of make Mepro Electrical complete all as specified and directed.

Supply and fixing Wall Brass Bracket (double light) Lanterns black nickel & gold plated finish with 240mm x 80mm decorative base , two brass arms 250mm length provided with 52mm length x 34 mm Dia galleries with one ornamental flower middle of arms and with 2 pin brass holders inside and 155mmx 129mm frosted glass shades including all fittings for wall mounting and LED bulb 5 W as per Cat. Part No.WBL-MBBD-903 of make Mepro Electrical or equivalent cat part in make specified in particular specification complete all as specified and directed.

Supply and fixing Wall Aluminium Brackets with cast aluminium polyurethane paint (with prior treatments) with round base nipple 12.7 mm holder threads, projection 120 mm with brass gallery ,brass holder and glass with 3 watt LED bulb suitable for bed side lamps including all fittings for wall mounting and LED bulb 3 W as per Cat. Part No.AL-120 of make Mepro Electrical or equivalent cat part in make specified in particular specificationcomplete all as specified and directed.

Supply and fixing in replacement rechargeable table/wall mounted LED stand with 3W LED bulb and stand including on/off switch complete all as specified & directed by Engineer-in-charge.

Supply and fixing ceiling fitting iron sheet made powder coated 10 " dia with brass holder & heat resistant glass as per cat part no. MICD-500 of make Mepro Electricals including 07 watt LED bulb complete all as specified and directed

Supply and fixing in repair Plug top 16 amp 3 pin complete all as specified and directed.

Supply and fixing in repar switch piano flush type single pole one-way 5/6 Amp complete all as specified and directed.

Supply and fixing in repair socket outlet 5/6 Amp, 5 pin , flush type complete all as specified and directed.

Supply and fixing in repar switch piano flush type single pole one-way 15/16 Amp complete all as specified and directed.

Supply and fixing in repair socket outlet 2-in-1, 3 pin 5/6 and 15/16 Amp flush type, complete all as specified and directed.

Supply and fixing in repair amp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

Supply and fixing in repair Modular switch , 1 way 6 Amp 1 module complete all as specified and directed.

Supply and fixing in repair Modular switch , 1 way 16 Amp 1 module complete all as specified and directed.

Supply and fixing in repair Modular socket outlet 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing in repair Modular socket outlet 6/16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate), duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C1, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

M/S NAYAL ELECTRICALS

kumar automobiles

JAGAT POWER ELCTRICAL

aditya construction