Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.7 LAccepted-AOC VPO BERI SUB TEHSIL BHOTA DISTT HAMIRPUR HP | L1 | Accepted-AOC Lowest Contractor | |
| 2 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 3 | Not Admitted-Fee/PreQual/Technical NA | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹17.8 L
EMD Value
₹34,235
Closing Date
24 Jul 2020, 4:00 pmClosed
Executive Engineer
HIMUDA Division Dharamshala
Including internal water supply and sanitary installations
2020_HIMUD_39027_1
HIMUDA/DD/CB/W-7/2015-1574-98
Open Tender
Civil Works
Item Rate
180 days
Daroh
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
HIMUDA Division Dharamshala
₹34,235
Yes
18 Dec 2020
18 Jul 2020
28 Jul 2020
18 Jul 2020
24 Jul 2020
18 Jul 2020
18 Jul 2020 - 24 Jul 2020
Amount
Providing and laying cement concrete 1:8:16 (1 cement :8 sand :16 graded stone aggregate 20 mm nominal size) and curring complete on slab and floor/depressed portion excluding cost of form work, screed laid under flooring including carriage of material in all leads and lifts.
Half brick masonry in second class common burnt clay building bricks in cement mortar 1:4 (1 cement:4 sand) including carriage of material in all leads and lifts.
Providing 2nd class deodar work in frames of doors, windows, clerestory,windows and other frames wrought, framed and fixed in position including carriage of material in all leads and lifts.
Providing and fixing 40mm thick panelled door shuters made of 2nd class deodar wood having style and top rail 100mm width and bottom rail 200mm width lock rail 150mm width with panel insert of 12mm thick commercial veneered flat pressed ply wood board of BWP grade confirming to I.S. 303-1975 and bounded with BWP type synthetc resin confirming to I.S. 848-1974 including providing and fixing 2nd class deodar wood beading of size 38X20mm along the panels on both faces of shutters and providing wooden cleats and ISI marked black enamelled M.S. butt hinges with necessary screws all complete as per drawing & specification and instructions of Engineer-In-Charge including carriage of material in all leads and lifts.
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x 10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lifts.
Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of material in all leads and lifts.
Providing and fixing 12 mm thick prelaminated board both side bwp phenol bonded exterior/ interior grade shutters with frame of 1st class deodar wood for cup board including nickel plated bright finished piano hinges -25mm thick frame including carriage of material in all leads and lifts.
Providing and fixing 19mm thick Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc complete including carriage of material in all leads and lifts.
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads and lifts.(a) 250 x16mm.
Providing and fixing aluminium tower bolts ( barrel type) ( 1st quality) anodized transparent or dyed to required shade and colour with necessary nuts bolts screws etc. complete including carriage of material in all leads and lifts.(a) 200x 10 mm.
Providing and fixing aluminium handles ( 1st quality) anodized transparent or dyed to required colour or shade with necessary nuts bolts screws etc. complete including carriage of material in all leads and lifts.(a) 125mm.
Providing and fixing Magnatic catcher for cup board heavy duty including necessary screws etc. including carriage of material in all leads and lifts.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium door including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge including making good the floorsincluding carriage of material in all leads & lifts.
Providing and fixing 50mm bright finished brass cup board or ward robe knob.including carriage of material in all leads and lifts.
Kota stone slab 25 mm thick in flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete including carriage of material in all leads & lifts.
Cement concrete 50 mm thick flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement including carriage of material in all leads & lifts.
White glazed tiles 6mm thick of ( any size & colour) in skirting risers of steps and dado in all heights 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) and jointer with cement slurry including carriage of material in all leads and lifts.
Providing and fixing 10mm thick antiskid water proof stain and impect resistant heavy duty vetrified tiles Nitco or equivalent 600x600x10 mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 ( 1cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lifts.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil ,grease,dirt and other foreign matter,sand papering and knotting-Ready mixed paint brushing wood primer pink,including carriage of material in all leads and lifts.
Painting two coat (excuding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all durt, dust and other forign matters including carriage of material in all leads and lift
Demolition above GL upto floor two level including disposal of unservicable material with in 20 meter lead- unreinforced cement concrete more than 15 cm thickness including carriage of material in all leads and lifts.
Providing perpex sheet roofing fixed with G.I. or J. and L hooks,bolts and nuts 8mm.dia metre with bitumen and G.I. limpet washers filled with white lead complete excluding cost of purlins, rafters and trusses.2 mm thick sheet including carriage of material in all leads and lifts.
Steel work welded in built up sections, trusses and framed work, including cutting, hosting, fixing in position and applying a priming coat of red lead paint, including carriage of material in all leads and lifts.(a)In beams joists channels ,angles,tee,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely including carriage of material in all leads and lifts.
Painting two coat (excuding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all durt, dust and other forign matters including carriage of material in all leads and lifts.Enamel paint other than white.
Providing and fixing to wall ceiling and floor Polyethylene – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe confirming to IS-15450, U.V. stabilized with carbon back having thermal stability for hot and cold water supply, capable to withstand temperature up to 80 degree C, including all special fittings composite material ( Engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 meter spacing. This includes testing of joints complete as per direction of Engineer- In-charge including carriage of materials in all leads and lifts.(i) 1620 (20 mm O.D. pipe)
ii) 2025 (25 mm OD pipe).
Providing and fixiing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.(a) 90 mm dia.
(b) 110 mm dia.
Providing and fixing PVCsingle equal branch with oval access door plain ISI marked insertion rubble washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. (a) 90 mm dia.
(b) 110 mm dia.
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.( a) 90 mm dia.
(b) 110 mm dia.
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete including carriage of material in all leads and lifts. (a) 90 mm dia.
(b) 110 mm dia.
Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc complete including carriage of material in all leads and lifts. (a) 90 mm dia.
(b) 110 mm dia.
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with adhesive etc. complete including carriage of material in all leads and lifts.(a) 110 x90 mm.
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of material in all leads and lifts.(a) 90 mm dia
(b)110 mm dia
Fixing Viterous China water closet Combo seat (Single piece COPPA 220 MM-S1013104) with all fittings including carriage of material in all leads and lifts.(Labour Rate)
Fixing plastic seat solid/ hollow type and cover for wash down water closet with CP brass hinges and rubber buffers-solid type with plastic seat and cover including carriage of material in all leads and lifts.(Labour Rate)
Providing and fixing vitreous china squatting plate pattern urinal of size 450 mm x 350mm with integral longitudinal flush pipe including connecting the urinal with wastes pipe by means of white lead mixed with chopped hamp ( waste pipe to be measured and paid for separately) flat back type of size 430x 260x 350 mm including carriage of material in all leads and lifts.
Providing and fixing PTMT coloured/white automatic flushing cistern with a pair of PVC /CI or MS bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connection with inlet , outlet over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for seperately ) 5 ltrs net capacity including carriage of material in all leads and lifts.
Fixing vitreous china wash basin (CLAIR-S Code-2040105/52090101) with Padestal including all fittings and confirming to BIS specifications including carriage of material in all leads and lifts.:- Size (i) 550mm x 400mm. (Labour Rate)
Providing and fixing C.P. brass waste for wash basin or sink:, and confirming to BIS specifications.incldung carriage of material in all leads and lifts.-32 mm dia.
Providing and fixing MI union for wash basin or sink -32mm dia including carriage of material in all leads and lifts
Fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material in all leads and lifts. (Labour Rate)
Fixing C.P. brass bib tap (superior heavy type) confirming to BIS specifications, including carriage of material in all leads and lifts.(a)15mm dia, (Labour Rate)
Providing and fixing CP brass angle valve 15mm without nuts and pipe including carriage of material in all leads and lifts
Providing and fixing PVC connection with brass unions 300/450mm length 15 mm nominal bore including carriage of material in all leads and lifts
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully trap or nahni trap etc. including carriage of material in all leads and lifts.
Providing and fixing PTMT toilet paper holder of approved quiality and colour with steel screws abd rawal plugs etc. including carriage of material in all leads and lifts.
Fixing 600mmx450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brassscrews and washers including carriage of material in all leads and lifts and confirming to BIS specifications. (Labour Rate)
Fixing C.P. brass towel rail complete C.P.brass brackets ( fixed to wooden plugs with C.P. brass screws, and confirming to BIS specifications, 600mm x 20mm, including carriage of material in all leads and lifts.(Labour Rate)
Fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws and confirming to BIS specifications, including carriage of material in all leads and lifts.(Labour Rate)
Providing and fixing concelled C.P. stop cock with 15mm including carriage of material in all leads and lifts.
Fixing C.P. Brass shower rose with 15mm or 20mm inlet including carriage of material in all leads and lifts. 100mm dia.(Labour Rate)
Providing and fixing P.V.C. waste pipe flexible (Coil type) length not less that 800 mm with 32 mm dia. including carriage of material in all leads and lifts.
Fixing centre hole Basin Mixer Dove including all fitting and confirming to BIS specifications, including carriage of material in all leads and lifts.(Labour Rate)
Fixing wall mixer with T shower including all fitting and confirming to BIS specifications, including carriage of material in all leads and lifts. (Labour Rate)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .