Providing 1No of 16 Mtrs High Mast Poles Kandrica Junction 2Nos 12mtr Highmast Poles Budameru Junction Rajiv Nagar Junction in Circle 2 area

Fabrication, transportation and supply of 16 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul/Surya/Vakrangee/Lysaght Mast

Kandrika Junction

Earth work excavation with an approximate quantity of 4.0 Cum for erection of 16 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete. as directed by the departamental authorities

Kandrika Junction

Fabrication, transportation and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of bottom 360mm and top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool operating speed of 900 RPM, and necessary cable trailer connections and single speed motor with M24 x 800 mm foundation bolts of required quantity, and GI Pipe ring suitable for fixing luminaires with LED type aviation twin lamp. Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ kipper/Consoul/Surya/Vakrangee/Lysaght Mast

Budameru Vanthana

Rajiv Nagar Section

Earth work excavation with an approximate quantity of 4.0 Cum for erection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erection of High Mast and carriage etc complete. as directed by the departamental authorities

Budameru Vanthana

Rajiv Nagar Section

Supply and transportation of following16 SqmmX 4 core XLPE insulated, 1100Vgrade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells /Finecab / KEI / Gloster/ Polycab /RR Kabel/ FortuneArrt /KEC Asian Cables/Orbit/Avocab /Gemscab/Batra Henlay.. as directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply and transportation of following35 SqmmX 4 core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part I)./1554-I Makes: Torent / Universal / Unicab / Havells /Finecab / KEI / Gloster/ Polycab /RR Kabel/ FortuneArrt /KEC Asian Cables/Orbit/Avocab /Gemscab/Batra Henlay.. as directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply and making end termination with up to 16 sqmm heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of following sizeMakes:Dowels/Jainson/Comet

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply and making end termination with up to 35 sqmm heavy Alluminium lugs (pin/ ring type) as per IS specification duly crimped with crimping tool, PVC tape etc of following sizeMakes:Dowels/Jainson/Comet

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Earth work excavation for cable trench in all soils i.e., hard / loose ground soils and refilling of trench after laying of cable including all labour charges, sundries etc., complete as per directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Laying of U.G cable up to 50 Sqmm in trench / open area including inserting of cable in the HDPE DUCT including all labour charges & sundries etc., complete as per directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply and Transporation of outer dia 50 mm and inner dia 38 mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes: DURA LINE (Dura Guard) or its equivalent make. as directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply of 3 core 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes : As per list of recommended brands as category I Makes: Finolex / Havells /Polycab/ Goldmedal as directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Engaging of Air compressor 7Cmm (Diesel) on hire basis including hire charges, fuel charges, crew charges etc., complete as directed by the departmental authorities

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Providing Independent earthing by excavating a trench to a depth of 2.10 M in all soils, as per size specified in the approved data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete as directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Fixing charges of LED Luminaires including 3 core wire and MCB's.As per directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply and transportation of 200WLED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05, Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with wide/ Narrow beam optics, THD<10% at 110 Volts AC, driver efficiency >90%, , CCT: 3000K - 5700K, minimum CRI>70, etc., completea) LUMINAIRE a) LUMINAIRE a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture / Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Livia Pro) / FortuneArrt (Fin)/ Rhino(GPFL02 Series) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG. .as directed by the departamental authorities

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply of Automatic Street Light Control System with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclosure of IP 54 protection, MCBs and contactor suitable to control the load of 5 kw of Three phase load with necessary clamping arrangements. Makes: As per list of recommended brands. .Make: Swadeep Nature Switch / Lightmate/ GL/Bajaj As per directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Supply of 6-32A SP MCB 10KA C/D Curve ISI Mark. Makes: Legrand-DX3/Schneider-Acti9/L&T-AU as directed by the departamental authorities

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Providing Service connection for three phase including cost of copper wire and tranco service connection charges including all Labour charges etc., complete as per directed by the departmental authorities.

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Providing Plain Cement Concrete of M20 Grade Design Mix using 343Kgs. of Cement, 20mm,10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including cost and conveyance of all materials and all labour charges for machine mixing, laying, tamping of concrete & curing for 14 days etc., complete as per drawings and technical specifications of MORTH. 40x0.45x.0.45=30.37

Kandrika Junction

Budameru Vanthana

Rajiv Nagar Section

Disconnecting electrical supply, dismantling luminaires/cables, dismantling and lowering 12 m mini high mast using crane/manual tools, excavation around RCC foundation, breaking and removing RCC foundation including anchor bolts, loading, transportation and disposal of debris/scrap, and site restoration complete.”