15 Vivekadhin – YEAR 2026-27

Name Of Work :- Providing, Supplying & Erecting Street Light Pole with LED Lights From Mamtaben Ganeshbhai Fart To

Mahesh Bhai Ratanbhai House at Vagodiya .

No Description Quantity Total Rate Per Amount

1 Supplying & erecting Steel tubular pole (Swaged) confirming to IS -

2713 (Part-II) 1980. Manufacturing process of steel tubular pole should

be as per IS specification. Basic steel tube should be ISI Marked. Pole

should be painted by one coat of Zinc comet Primer and two coat of

Aluminium /approved paint to be erected on / in existing Foundation.

The length of poles are as below.

(A) 7.5 mtr. Long Swaged Steel tubular pole

(i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate with

necessary G.I. J Bolts (Approximate Pole weight 67 Kg) For burial

erection 12.00 7246.75 NO.

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm for pole, Suitable

for mounting on surface of foundation with GI foundation bolts, with

required stiffeners welded with pole. 12.00 982.73 NO.

(iii) Add Extra for PU base primer and PU Paint on pole. 12.00 386.83 NO.

2 Supplying and erecting street light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class GI

sleeve tubing of approx. 45cms.length and suitable for 76.5mm/80mm

or require size pole top having sufficient fastners for fixing the brackets

and having suitable rise as per site condition as directed and spread of

mtr.with suitable welded stiffener reducer and with lock nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. Suitable for side entry fitting brackets of following

[A] Single Arm Bracket 1.5 Mtr 12.00 683.77 NO.

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

doors as per requirement having locking arrangements with mounting

clamp with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep] 12.00 515.10 Nos.

4 Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection.

(iii) above 60 to 90 Watts Cat III 12.00 5976.17 NO.

5 Supplying and erecting Flexible PVC insulated multistrand multicore

kv grade ISI marked copper wires of following size to be erected as

e) 1.50 Sq.mm 3 core round PVC sheathed 264.00 31.31 Rmt.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 16 Sq. mm 576.00 153.52 Rmt.

7 Supplying and erecting B class Galvanized iron pipe having smooth

finished bore of the pipe on both ends erected nuts and bolts along the

pole / wall shaping the pipe as per site requirement. Pipe dia as

8 Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

9 For using salt and charcoal / coke as required for pipe type earthing.

10 Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil Length of pipe -

Back filling compound - 1 Nos Bag of 15 Kg. 2.00 4591.46 Nos.

11 Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

ground. 140.00 74.74 Rmt.

12 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or

required depth for laying any size of cable or locating the fault all over

the run and back filling the same and making the surface as normal

ground. (B) If additional machinery like hammer driller or JCB use [Add]

13 Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying of

cable. below ground / road surface for enclosing cable and back filling

the same to make ground as per original.

14 Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with suitable brass studs with nuts, washers and

clamps of size 25mm x 3mm suitable for pole painted with one coat of

red lead paint. 12.00 146.45 Nos.

15 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom

including excavation for the pole of size 60 x 60 x 120 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high

upper ground level with necessary curing and finishing in approved

manner. ( for 7.5 & 8/8.5 mtr pole) 12.00 1292.80 Nos.

16 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm 48.00 38.38 Nos.

(D) 2 to 4 core 16 Sq. mm 24.00 47.47 Nos.

17 Solderless crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner.

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside

looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S.

Angle of Two Nos. one is welded and other with nut and bolt for

erecting Bakelite sheet. Painting the Section Pillar inside and out side

with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 1.00 1884.66 Nos.

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

19 Supplying and erecting HYLAM sheet on existing angle iron frame.for

following thickness (F) 12mm 1.00 2311.89 Smt.

20 Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as

directed. 1.00 3168.37 Nos.

21 Supplying and erecting Ammeter / Voltmeter selector switch for

phase AC Supply 500 V on existing panel board with necessary

connections. 1.00 317.14 Nos.

22 Supplying and erecting approved make panel mounting type Digital

Ammeter having 3 digits LED display, external CT operated, calibrated

for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate. 1.00 1558.43 Nos.

23 Supplying and erecting approved make panel mounting type Digital

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected

on existing panel board with all connection, wiring etc .with

manufacturers calibration certificate. 1.00 1275.63 Nos.

Supplying and erecting approved make suitable panel indicator LED type

lamp, lens cover, complete erected with necessary connections.

25 Providing & erecting L.T. Current Transformer with bar primary 50/5 to

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured

with insulating materials connected to the meter 1.00 274.72 Nos.

26 Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

ICS=100% of ICU only Cat III 1.00 6173.12 Nos.

27 providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III 12.00 270.68 Nos.

28 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

curve) having 10KA breaking capacity & confirms to IS :8828 in existing

box having following capacity

(A) 6 to 32 Amp. Cat.III 1.00 578.73 Nos.

Add 3 % Cont. & Superv. :