Construction of Office building of Irrigation Sub Division Kodinar.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Ite Description of Item (with brief Quantity Unit Rate In Amount

m specification and reference to book of figures

No specifications)

1 Excavation for foundation upto 1.5 m depth 31.25 Cum. 164.64

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil

2 Excavation for foundation upto 1.5 m depth 50.67 Cum. 281.73

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(C) Hard Murrum

3 Excavation for foundation upto 1.5 m depth 14.44 Cum. 289.40

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(D) Soft rock not requiring

4 Providing and laying cement concrete 1:3:6 (1- 15.17 Cum. 4192.33

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

5 Uncoursed Rubble Masonry with hard stone of 65.80 Cum. 2641.38

approved quality in foundations and plinth in

Cement Mortar 1:5 (1-cement : 5-coarse sand

including levelling up etc. complete

6 White Stone Bela mesonry block in course in 22.66 Cum. 6403.40

superstructure with stone of approved quality

in Cement Mortar 1:5 (1-Cement :5- course

sand) including packing the joints etc.

complete.(up to plinth)

7 Providing and laying cement concrete 1:2:4 (1- 6.26 Cum. 4975.06

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A)

Foundation and Plinth

8 Filling available excavated earth (excluding 110.46 Cum. 137.47

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

9 Carring out plinth treatment to post 164.87 Sqm 62.30

construction / existing structure by spraying

chemical solution for termite control treatment

including labour and material consistment with

I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is

recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical / Sqm

of surface is recommended as per I.S

10 White Stone Bela mesonry block in course in 62.00 Cum. 6698.05

superstructure with stone of approved quality

in Lime Mortar 1:5 (1-Cement :5- course sand)

including packing the joints etc. complete. (G.F.)

11 White Stone Bela mesonry block in course in 55.62 Cum. 6993.19

superstructure with stone of approved quality

in Lime Mortar 1:5 (1-Cement :5- course sand)

including packing the joints etc. complete.

12 White Stone Bela mesonry work in partition 18.58 Sqm 708.40

walls upto 15 cm thickness in cement Mortar

1:4 ( 1- Cement : 4- course sand) (Masonry G.F.)

13 White Stone Bela mesonry work in partition 7.86 Sqm 1003.55

walls upto 15 cm thickness in cement Mortar

1:4 ( 1- Cement : 4- course sand) (Masonry F.F.)

14 Providing and laying controlled cement 9.85 Cum. 7595.40

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement for

reinforced concrete work in (D) Columns,

Pillars posts and struts upto floor two level.

15 Providing and laying controlled C.C.M.200 & 21.50 Cum. 7031.62

curing complete including the cost of form work

but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor

two level for G.F.

16 Providing and laying Controlled cement 7.26 Cum. 7989.50

concrete M-200 for R.C.C.Lintels, including the

finishing smooth with curing etc complete

including the cost of form work but excluding

the cost of reinforcement For G.F.

17 Providing and laying controlled cement 2.23 Cum. 6779.12

concrete M-200 curing complete including the

cost of form work but excluding the cost of

reinforcement for reinforced concrete work in

18 Providing and laying controlled C.C.M.200 & 23.10 Cum. 6698.32

curing complete including the cost of form work

but excluding the cost of reinforcement for

reinforced concrete work in Slabs ,landing,

cantilevers for slab (GF Slab )

19 Providing and laying controlled C.C.M.200 & 12.14 Cum. 6740.34

curing complete including the cost of form work

but excluding the cost of reinforcement for

reinforced concrete work in Slabs ,landing,

cantilevers for slab (FF Slab )

20 Providing and laying controlled C.C.M.200 & 1.38 Cum. 8471.88

curing complete including the cost of form work

but excluding the cost of reinforcement for

reinforced concrete work in Stair case upto

floor two level for (Staircase G.F)

21 Providing TMT Bar FE 415 reinforcement for 9798.02 Kg 68.33

R.C.C. work including bending, binding and

placing in position complete upto floor two

22 Providing and fixing FRP frame size 100x50 mm 29.10 Sqm 2377.76

and 28mm thick FRP depress panel shutter

having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame

is to be filed up with injected fire retardant

grade polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame

& shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures &

fastenings & fastener sleeve.

23 Providing and fixing window having extruded 28.28 Sqm 1583.95

aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt),

horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of

size 92mm x 31.75mm x 1.50mm (of Jindal

Section no:8933,@ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member

of size 40mm x 18mm x 1.29 mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt/ with

mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings

and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

24 Providing and fixing standared extruded of 2.16 Sqm 1175.56

alluminium section of size 63mm x 38.10mm x

1.2mm (Jindal Section :2434, @ Wt.

Kg/mt) with colour anodized alluminium frame

for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

25 Providing and fixing M.S.Grills of required 913.00 Sqm 118.07

pattern with M.S.Flats at required spacings and

frame alround,square or round bar,with round

headed bolts and nuts or by screws plain grill

including approval quality of primer and two

coat of oil painting etc.

26 Providing 10mm thick Mala cement plaster in 156.04 Sqm 188.47

single coat on brick concrete walls for interior

plastering upto floor two level and finished

even and smooth in (i) Cement Mortar 1:4 (1-

Cement:4 sand) incl. finishing Putty with a

floating coat of neat cement slurry etc. G.F.

27 Providing 10mm thick Mala cement plaster in 14.65 Sqm 213.49

single coat on brick concrete walls for interior

plastering upto floor two level and finished

even and smooth in (i) Cement Mortar 1:4 (1-

Cement:4 sand) incl. finishing Putty with a

floating coat of neat cement slurry etc. F.F.

28 Providing 15mm thick Mala cement plaster in 463.50 Sqm 233.26

single coat on smooth finished (Similar)side of

single or half masonary walls for interior

plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand) incl. finishing Putty with a

floating coat of neat cement slurry etc. G.F.

29 Providing 15mm thick Mala cement plaster in 275.00 Sqm 258.29

single coat on smooth finished (Similar)side of

single or half masonary walls for interior

plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-

cement :4-sand) incl. finishing Putty with a

floating coat of neat cement slurry etc. F.F.

30 20mm thick sand faced cement plaster on walls 513.50 Sqm 358.72

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand)

31 Granite slab (telephonice Black) (18mm thick) 15.70 Sqm 3869.11

in risers of steps dedo and pillars laid 10mm

thick cement mortar 1:3 cement 3 coarse sand)

and jointed with grey cement slurry including

rubbing and polishing etc. comp. in single piece

for stair steps with full molding( single piece

not more than 150cm)including, the edge&

manage three groove for thread

32 P & L 24" x 24" vitrified 8 mm thick tile flooring 210.25 Sqm 1324.63

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing & cleaning

the surface etc. complete for light shade

33 Providing and layingMarbo Grenite tiles 8 to 10 9.36 Sqm 1195.02

mm thick , 24'' x 24'' in skrting risers of steps

and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white

34 Providing and laying Ceramic tiles 6mm thick in 16.55 Sqm 943.16

flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement.

35 Providing and layingCeramic tiles 6mm thick in 153.30 Sqm 1091.96

skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry

36 Providing and Fixing Machine cut, free edges, 48.50 Sqm 3716.80

machine polished Granite Telephonice Black

stone slab 18 mm thick for Doors/Windows Cill

and Jambs cladding as per design including full

molded round front edge and 1 cm nosing and

laid on 10 mm thick cement mortar 1:3 (

cement:3 coarse sand) jointed with grey cement

slurry including rubbing and polishing finishing

37 Providing and laying broken chine mosaic 144.00 Sqm 1084.17

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic

acid with C.C 1:2:4 flooring with 40 mm etc.(

waterproofing 3 years bond for lekage) as

38 Wall painting (three coats) with primer plastic 170.70 Sqm 136.19

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth. etc. complete.

39 Wall painting (three coats) with primer plastic 592.65 Sqm 130.40

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth. etc. complete.

40 Applying two coats of Birla or Asian (or 171.00 Sqm 40.59

equivalent) acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

41 Finishing wall with weather proof exterior 513.50 Sqm 122.14

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

42 Providing and fixing stainless steel railing 9.42 Rmt 2715.89

(modular type) having hand rail 850mm height

and of 50mm dia and baluster 32mm dia at

90cm C/C and 4 horizontal pipeof 19mm dia. At

required spacing as per design and SS having

304 grade and 18 gauge pipe including

fastening, hold fast, clumps coach bolts etc.

43 Providing laying and jointing in true line and 110.00 Rmt 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials.

44 Providing laying and jointing in true line and 27.00 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials.

45 Providing laying and jointing in true line and 48.00 Rmt 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as

directed including necessary fittings etc.

including testing of pipe and joints and fixing

the same with adhesive solvent, including cost

of all materials.

46 Providing and fixing PVC SWR Nahni trap IS 7.00 Each 614.19

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good

47 Providing and fixing S.W. gully trap with C.I. 2.00 Each 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

48 Providing and fixing screw down bib taps of 7.00 Each 186.83

following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

49 Providing and fixing wash basin with single 4.00 Each 1975.96

hole for pillar tap with C.I or M.S brackets

painted white including cutting cutting holes

and making goods the same includes CP pillar

or tape of 15mm dia, CP stop tape of 15mm dia

plastic waste pipe & PVC connection etc.

complete. (A) Vitreous china. (II) Flat back

washbasin 550 mm x 400 mm size (I) in colour

(Hindustan, Cera, Parry ware or equivalent

50 Providing and fixing W.C. squatting pan (Indian 2.00 Each 1633.65

type W.C. Pan) size 580mm including 'P' trap or

‘S’ trap, foot rest connection,G.I Inlet and bed

concreting flush valve etc. comp.

51 Providing and fixing wsh down water closet 4.00 Each 1959.81

(European type, W.C. Pan) with integral P or S

trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand)

(Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in

52 Providing erecting and fixing double coated 1000.00 Litre 3.95

Syntex PVC. (ISI) water tank of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

53 Providing and fixing 600mm x 450mm bevelled 4.00 Each 859.41

edge mirrror of superior glass mounted on

6mm thick A.C. sheet or plywood sheet and

fixing to wooden pluge with C.P. brass screws

54 Providing and fixing C.P. brass towel rail 8.00 Each 616.42

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B) 600mm

55 Providing and fixing brass screw down stop 10.00 Each 205.83

tap.(A) 15mm dia.

56 Providing and fixing Gun metal check or non- 3.00 Each 420.63

return fullway wheel valve.(C) 25mm dia.

57 Providing and fixing Gun metal check or non- 3.00 Each 663.43

return fullway wheel valve.(E) 40mm dia.

58 Providing and fixing to wall ceiling and floor 60.00 Rmt 181.98

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low densidy,

complete with special falnge compression type

fittings, wall clipsetc. including making good the

wall ceiling and floor.(E) 50mm

59 Providing and fixing to wall ceiling and floor 40.00 Rmt 339.05

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low densidy,

complete with special falnge compression type

fittings, wall clipsetc. including making good the

wall ceiling and floor.(G)110 mm

60 Providing and fixing in position cowel went to 2.00 Each 505.17

pipes.(C) 100mm dia

61 Providing, laying and jointing in true line and 40.00 Rmt 918.67

level 110 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall

be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diametre x

mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

62 Providing, laying and jointing in true line and 40.00 Rmt 834.38

level 160 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall

be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x

mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as

directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

63 Constructing brick masonry chamber for 6.00 Each 2932.93

underground C.I. Inspection chamber and

bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover

Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single

64 Providing and fixing C.I. Manhole cover 0.60 M. 6.00 Each 958.17

x 0.45M. size having weight not less than 35Kg.

65 Providing sock pit of 5.00 Cu.M. Volume 3.00 Each 3516.51

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone including

providing vatas in C.M. 1:3 with finishing curing

etc. complete as directed.

66 Providing and fixing in position 300mm high, 50.00 Each 714.07

150mm wide English/Gujarati letters made

from 1.0mm thick stainless steel sheet as

directed by Engineer in Charge with all

necessary tools & plants etc.comp.

67 Providing and fixing in position 150mm high, 5.00 Each 408.04

Enlgish/Gujarati letters made from 1.0mm

thick stainless steel sheet as directed by

Engineer in charge with all necessary tools &

Plants etc. comp.

68 Providing and Fixing Acrylic Sheet Name Plate 7.00 Each 206.06

complete as per engineer in charge directed

69 Providing and laying controlled cement 18.83 Cum 4762.05

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

70 Providing and fixing internal electrification 4516029.07 Lum 9.50%

work of office building including concealed Sum

PVC conduit wiring with FRLS copper

conductor of approved make, modular type

switches and sockets, LED light fittings,

ceiling / exhaust fans, power plug points,

distribution boards with MCB/RCCB,

earthing, building-mounted external light

fittings such as veranda, porch and entrance

lights, complete with all accessories, labour,

materials, testing and commissioning as per

relevant IS specifications and directions of

Engineer-in-Charge.”

I/We am/are willing to carry out the work at… ...................... % above/below

percent(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3GST and Income tax TDS will be deducted at a source while making payments of bills

4In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt.G.R.:MIS102010/17/K1 Date:30/07/2018 as stated in S.O.R. there fore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Signature of Contractor Executive Engineer,

Gir Somnath Irrigation Division,