Construction of Community Sanitary Complex (19 Units) at MJP Welfare Residential Institution in Golagamudi (V) of Golagamudi GP in Venkatachalam Mandal of SPSR Nellore District Est Cost of Rs.57.00 Lakhs

Earthwork excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils for Footings, Steps, Ramp including all labour charges etc., complete with over heads and contractor profit @ 13.615%

Sand filling in the foundations including cost & conveyance of all materials and all albour charges, watering and tamping charges etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Plain Cement concrete corresponding to M15 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix using 40mm HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.to site, all operational, incidental and all labour charges such as mechine mixing, laying, curing concrete etc.complete for foundations with over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Columns including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Plinth Beam including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Sunshade including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Roof Beam including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Slab of 100mm thick including over heads and contractors profit @ 13.615%

Brick Masanory 190mm thick for panel walls in sub structure with CM(1:6) proportion using 2nd class bricks of size 19x9x9cm from approved sources having crushing strength not less than 35Kg/sqm including cost & conveyance of all materials like cement, sand, bricks, water etc. to site, all operational incidental and labour charges such as mixing cement mortar, curing, scafolding charges, constructing masanory, lift charges, curing etc.for finished item of work for foundations and superstructure with over heads and contractors profit @ 13.615%

Providing high yield strength deformed (HYSD) steel bars (Fe500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and binging wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost & conveyance of bars from approved sources, binding wire, cover blocks and all operational, incidental and labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work with over heads and contractors profit @ 13.615%

Acco-proof Plastering with CM (1:3) 20mm thick including cost and conveyance of all materials like cement, sand, water etc. to site, all operational, incidental and all labour charges such as mixing mortar, curing, scafolding charges, lift charges for inside Sump etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials like cement, sand, water etc. to site, all operational, incidental and all labour charges such as mixing cement mortar, curing, scafolding charges, lift charges for outside Sump etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Flooring with ceramic tiles 8 to 10mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 600x600mm of IS: 137I E,137T 2,13630 of any colour set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depEh of slabs laid on already laid cement concrete bed set oyer base coat of C d {1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sgm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., (DC 7-6) complete with over heads and contractor profit @ 13.615%

Providing dadooing to walls with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming Eo IS:13711, IS: l3712, IS:13630 (Parts 1 to 1 ) of any colour and finish in all shades and designs set oyer base COBt Of CMt1:5§ 12 mm thick with cement slurry of horiey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like tiles, cement, sand and water etc., complete. including seignorage charges etc., complete for finished item of work.

Painting to new walls with two coats of acylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of appropriate primer of approved brand, making three coats in all to pive an even shade after throughly brushing the surface to remove all diet and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc„ complete., for finished item of work as per SS 911 for Internal walls (APSS No: 912a) with over heads and contractors profit @ 13.615%

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame BMT-N.92 with over heads and contractors profit @ 13.615%

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour with over heads and contractors profit @ 13.615%

Supplying and Fixing of Orissa pan white glazed W.C 1st quality Confirming to IS 2556 part 3 with P trap of size 580mmx440mm BMW-D.04 with over heads and contractors profit @ 13.615%

Supplying and Fixing of Wash hand Basin Supply of Ceramic square glossy finish hand wash basin of size: 550x400mm 15mm nominal bore chromium plated pillar tap of 1st quality indian make 400gms & Double C.P. Pillar cock(BMW-D.25 ) with over heads and contractors profit @ 13.615%

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 with over heads and contractors profit @ 13.615%

Cost and Supply of RCC ventilators 0.60x0.30 mts size including cost and supply of all materials & labour charges etc. complete BMS-W.15 with over heads and contractors profit @ 13.615%

Earthwork excavation and depositing on bank with an initial lead of 10 m and 2 m lift in loamy clayey soils for Footings, Steps, Ramp including all labour charges etc., complete with over heads and contractor profit @ 13.615%

Sand filling in the foundations including cost & conveyance of all materials and all albour charges, watering and tamping charges etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Plain Cement concrete corresponding to M15 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix using 40mm HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.to site, all operational, incidental and all labour charges such as mechine mixing, laying, curing concrete etc.complete for foundations with over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Columns including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Plinth Beam including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Sunshade including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Roof Beam including over heads and contractors profit @ 13.615%

VRCC (1:2:4) design mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete etc.complete but excluding cost of steel and its fabriaction charges for finished item of work including centring, shuttering for Slab of 100mm thick including over heads and contractors profit @ 13.615%

Brick Masanory 190mm thick for panel walls in sub structure with CM(1:6) proportion using 2nd class bricks of size 19x9x9cm from approved sources having crushing strength not less than 35Kg/sqm including cost & conveyance of all materials like cement, sand, bricks, water etc. to site, all operational incidental and labour charges such as mixing cement mortar, curing, scafolding charges, constructing masanory, lift charges, curing etc.for finished item of work for foundations and superstructure with over heads and contractors profit @ 13.615%

Providing high yield strength deformed (HYSD) steel bars (Fe500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and binging wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost & conveyance of bars from approved sources, binding wire, cover blocks and all operational, incidental and labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work with over heads and contractors profit @ 13.615%

Acco-proof Plastering with CM (1:3) 20mm thick including cost and conveyance of all materials like cement, sand, water etc. to site, all operational, incidental and all labour charges such as mixing mortar, curing, scafolding charges, lift charges for inside Sump etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials like cement, sand, water etc. to site, all operational, incidental and all labour charges such as mixing cement mortar, curing, scafolding charges, lift charges for outside Sump etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Flooring with ceramic tiles 8 to 10mm thick 1st quality non skid floor tiles of scratch free of nano finish of size 600x600mm of IS: 137I E,137T 2,13630 of any colour set over a base coat of CM (1:8) 12mm thick over already laid cement concrete bed including neat cement slurry at 3.30 kgs per sqm and jointing neatly with white cement paste to full depEh of slabs laid on already laid cement concrete bed set oyer base coat of C d {1:8) 12mm thick including neat cement slurry spread at 3.30 kgs per sgm and jointing to full depth of ceramic tiles including cost and conveyance of all materials and labour charges, filling joints neatly, dressing of flooring stones, etc., (DC 7-6) complete with over heads and contractor profit @ 13.615%

Providing dadooing to walls with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming Eo IS:13711, IS: l3712, IS:13630 (Parts 1 to 1 ) of any colour and finish in all shades and designs set oyer base COBt Of CMt1:5§ 12 mm thick with cement slurry of horiey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like tiles, cement, sand and water etc., complete. including seignorage charges etc., complete for finished item of work.

Painting to new walls with two coats of acylic interior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of appropriate primer of approved brand, making three coats in all to pive an even shade after throughly brushing the surface to remove all diet and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc„ complete., for finished item of work as per SS 911 for Internal walls (APSS No: 912a) with over heads and contractors profit @ 13.615%

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame BMT-N.92 with over heads and contractors profit @ 13.615%

Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour with over heads and contractors profit @ 13.615%

Supplying and Fixing of Orissa pan white glazed W.C 1st quality Confirming to IS 2556 part 3 with P trap of size 580mmx440mm BMW-D.04 with over heads and contractors profit @ 13.615%

Supplying and Fixing of Wash hand Basin Supply of Ceramic square glossy finish hand wash basin of size: 550x400mm 15mm nominal bore chromium plated pillar tap of 1st quality indian make 400gms & Double C.P. Pillar cock(BMW-D.25 ) with over heads and contractors profit @ 13.615%

Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make conforming to IS:2556-1995 with over heads and contractors profit @ 13.615%

Cost and Supply of RCC ventilators 0.60x0.30 mts size including cost and supply of all materials & labour charges etc. complete BMS-W.15 with over heads and contractors profit @ 13.615%

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for Over Head Tanks including over heads and contractors profit @ 13.615%

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for Fixing of Labour Charges including over heads and contractors profit @ 13.615%

Supply and Transportation of 2.00 HP Single phase Mono block C) body motor(40 mmX40 mm)pumpset confirms to }S 9079:2002 Makes Pluga / U Neel / Sterling/ Falcon /Kumar / Unnali zen/ElIen/LDWSuguna/UNltek /Polycab/ Anco/ Sadar/FifweTl excluding aTT including over heads and contractors profit @ 13.615%

Construction of pipe line for water supply with pipes as per IS 4985 / 1988 with its amendments and revisions there on including cost of pipes, as per requirement and excavation machinery and manual for pipe line in all soils except rock and boulders with lowering, laying and jointing of pipes true to alignment and gradient and refilling trenches with excavated soils with watering, tamping and removing surplus earth from site of work and labour needed for finished pipe line work for Construction of Distibution lines ,140mm dia PVC Pipe 6kg/cm2 including over heads and contractors profit @ 13.615%

Cost and Supply of 140 X 140 X 140 mm PVC Tee including over heads and contractors profit @ 13.615%

Cost and Supply of 140 mm PVC Elbow including over heads and contractors profit @ 13.615%

Supply and delivery of 7/16 Service wire of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and Fixing of Premium make CPVC Pipes and Fittings to Meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tubes Sizes 1/2 ton 2 Ashirvad Flow guard SDR 11 and SDR 13.5 pipes are made from identical CPVC compound shaving the same physical proper ties for HOt and cold water - 28.60 mm OD Pipe- SDR 13.5 including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Provision for taps S & F 12.7 mm N.P bib tap lndian make 3 heayy duty each, list of approved brands/ manufractureres/ suppliers including labour charges including over heads and contractors profit @ 13.615%

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.including over heads and contractors profit @ 13.615%

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for Over Head Tanks including over heads and contractors profit @ 13.615%

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for Fixing of Labour Charges including over heads and contractors profit @ 13.615%

Supply and Transportation of 2.00 HP Single phase Mono block C) body motor(40 mmX40 mm)pumpset confirms to }S 9079:2002 Makes Pluga / U Neel / Sterling/ Falcon /Kumar / Unnali zen/ElIen/LDWSuguna/UNltek /Polycab/ Anco/ Sadar/FifweTl excluding aTT including over heads and contractors profit @ 13.615%

Construction of pipe line for water supply with pipes as per IS 4985 / 1988 with its amendments and revisions there on including cost of pipes, as per requirement and excavation machinery and manual for pipe line in all soils except rock and boulders with lowering, laying and jointing of pipes true to alignment and gradient and refilling trenches with excavated soils with watering, tamping and removing surplus earth from site of work and labour needed for finished pipe line work for Construction of Distibution lines ,140mm dia PVC Pipe 6kg/cm2 including over heads and contractors profit @ 13.615%

Cost and Supply of 140 X 140 X 140 mm PVC Tee including over heads and contractors profit @ 13.615%

Cost and Supply of 140 mm PVC Elbow including over heads and contractors profit @ 13.615%

Supply and delivery of 7/16 Service wire of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and Fixing of Premium make CPVC Pipes and Fittings to Meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tubes Sizes 1/2 ton 2 Ashirvad Flow guard SDR 11 and SDR 13.5 pipes are made from identical CPVC compound shaving the same physical proper ties for HOt and cold water - 28.60 mm OD Pipe- SDR 13.5 including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Provision for taps S & F 12.7 mm N.P bib tap lndian make 3 heayy duty each, list of approved brands/ manufractureres/ suppliers including labour charges including over heads and contractors profit @ 13.615%

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >=100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.including over heads and contractors profit @ 13.615%