Providing, Installation and Commissioning of Air Conditioning Machines and dismantling and re installation of Air Conditioning Machines in the different rooms of the second floor under construction of North Tripura District and session judge court bu

Amount

Providing in/c testing and commissioning (except Installation) of Split type High wall split A.C. Machine with Inverter Compressor technology operating on non-CFC refrigerant (R-410A/R-32/equivalent refrigerants) suitable for wall mounting conforming to IS:1391 (Part-II) specification (Evaporator & Condenser must have copper pipe) suitable for operation on 230 volt +- 10%, not less than 3 (Three) Star rating (2019 Standard), 50Hz, Single Phase AC Supply capable of performing a) Cooling b) Dehumidifying c) Air Circulation d) Filtering as per direction of the Engineer-in-Charge.

1.500 TR(4500 kcal/hr)

2.00TR(6000 kcal/ hr)

Standard installation of 1.5 TR/2.00 TR capacity High Wall Split type type Air Conditioner in/c repairing of drilled wall by cement mortar, painting In/c necessary insulation of copper pipes and also providing electrical 3 pin 16 ampTop for connection in socket & necessary scafolding etc. complete as per direction of the Engineer-in-Charge.

Fabrication of M.S. platform for placement of condensing unit by using M.S. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c fitting, fixing grouting by cement mixer, painting, as per direction of the Engineer-in-Charge.

Supply and installation of additional length of copper pipe of 5/8" and 1/4" diameter or suitable diameter for suction and liquid line in a set and wrapping of copper pipes between indoor and outdoor unit (1.5 TR & 2.00 TR AC) beyond the standard length as per direction of the Engineer-in-Charge.

Providing and connecting Electric Control cables between indoor unit and outdoor unit beyond the standard length . 3C X 2.5 Sq. mm copper cable.

Providing hard PVC pipe of good quality of at least 25 mm diameter including necessary clamping and fittings for draining of condensate water from indoor unit as per direction of the Engineer-in-Charge.

Dismantling and re-installation of split (1.5/2.0 TR) type AC machine as per direction of the Engineer-in-Charge.

General servicing of 1.5/2.0 TR capacity AC machines (indoor & Outdoor unit) half yearly as per direction of the Engineer-in-Charge.

Charging fresh refrigerant gas (non-CFC,R-410A/R-32/equivalent refrigerants) for 1.5 TR/2.0 TR capacity split type AC’s as per direction of the Engineer-in-Charge.

R.P.ELECTRONICS

Eastern Commerce