Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LRejected-Finance KARIKKAKATHIL VEEDU KOCHUPLACHERY PUNALOOR | ALAPPUZHA | KERALA | 686534 | ₹3.7 L | L1 | Rejected-Finance project dropped vide resolution no. 13/1 dated 14-07-2026 and hence all bidders are rejected. |
| 2 | L2₹3.9 L+₹20,791.28 (5.64%)Rejected-Finance | ₹3.9 L+₹20,791.28 (5.64%) | L2 | Rejected-Finance project dropped vide resolution no. 13/1 dated 14-07-2026 and hence all bidders are rejected. |
| 3 | L3₹3.9 L+₹23,457.93 (6.37%)Rejected-Finance | ₹3.9 L+₹23,457.93 (6.37%) | L3 | Rejected-Finance project dropped vide resolution no. 13/1 dated 14-07-2026 and hence all bidders are rejected. |
| 4 | L4₹4.0 L+₹30,356.69 (8.24%)Rejected-Finance | ₹4.0 L+₹30,356.69 (8.24%) | L4 | Rejected-Finance project dropped vide resolution no. 13/1 dated 14-07-2026 and hence all bidders are rejected. |
| 5 | L5₹4.0 L+₹33,867.73 (9.19%)Rejected-Finance | ₹4.0 L+₹33,867.73 (9.19%) | L5 | Rejected-Finance project dropped vide resolution no. 13/1 dated 14-07-2026 and hence all bidders are rejected. |
| Sl No | Description | Qty | Unit | ALFA STORES L5 | AFSAL R L4 | HABEEBULLAH SYED RAWTHER L2 | AMJITH A L6 | AKHIL. U L1 | Y GEORGE KUTTY L3 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00BUILDING MAINTENANCE | |||||||||
| 1.00 | OD43704/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 151.03 | sqm | 1,099.55 ₹1,66,059.54 | 1,090.3 ₹1,64,662.56 | 1,063.78 ₹1,60,657.37 | 1,100 ₹1,66,127.5 | 1,006.96 ₹1,52,076.13 Lowest | 1,071 ₹1,61,747.78 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.4 | cum | 8,774.17 ₹21,075.56 | 8,700.3 ₹20,898.12 | 8,488.78 ₹20,390.05 | 9,142 ₹21,959.08 | 8,035.29 ₹19,300.77 Lowest | 8,554 ₹20,546.71 |
| 1.00 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 2 | cum | 6,915 ₹13,802.34 | 6,856.9 ₹13,686.37 | 6,690.16 ₹13,353.56 | 7,240 ₹14,451.04 | 6,332.76 ₹12,640.19 Lowest | 6,740 ₹13,453.04 |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 21.83 | sqm | 351.3 ₹7,669.58 | 347.9 ₹7,595.35 | 339.85 ₹7,419.61 | 360 ₹7,859.52 | 321.69 ₹7,023.14 Lowest | 342 ₹7,466.54 |
| 1.00 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | 15.75 | sqm | 198.8 ₹3,131.5 | 197 ₹3,103.14 | 192.33 ₹3,029.58 | 295 ₹4,646.84 | 182.06 ₹2,867.81 Lowest | 192 ₹3,024.38 |
| 1.01 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | 41.1 | sqm | 1,687.87 ₹69,376.52 | 1,671.7 ₹68,711.89 | 1,632.77 ₹67,111.75 | 1,745 ₹71,724.74 | 1,545.55 ₹63,526.74 Lowest | 1,645 ₹67,614.44 |
| 1.01 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 38.74 | kg | 729.39 ₹28,258.03 | 722.5 ₹27,991.1 | 705.67 ₹27,339.07 | 760 ₹29,443.92 | 667.97 ₹25,878.49 Lowest | 711 ₹27,545.56 |
| 1.01 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 15 | kg | 555.48 ₹8,332.2 | 550.8 ₹8,262 | 537.42 ₹8,061.3 | 580 ₹8,700 | 508.71 ₹7,630.65 Lowest | 541 ₹8,115 |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 3.3 | sqm | 1,214.88 ₹4,009.1 | 1,204.65 ₹3,975.35 | 1,175.36 ₹3,878.69 | 1,275 ₹4,207.5 | 1,112.57 ₹3,671.48 Lowest | 1,184 ₹3,907.2 |
Tender Value
₹4.2 L
EMD Value
₹10,587
Closing Date
2 Jul 2026, 6:00 pmClosed
Sandhya V S
LID EW Sub Division Pathanapuram Block Panchayath
Tender PTPM BP 93/2026-27-Interlocking and Maintenance of Nadukkunnu HBM LPS School - Pathanapuram Division
2026_LSGD_857130_11
01/AE/LID EW/PTPM/26-27
Open Tender
Civil Works - Buildings
Item Rate
180 days
Pathanapuram BP
Please refer Tender documents.
7 documents required · 7 mandatory
₹935
Yes
₹10,587
Yes
3 Aug 2026
24 Jun 2026
4 Jul 2026
24 Jun 2026
2 Jul 2026
24 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1BUILDING MAINTENANCE | |||||
| 1.001 | OD43704/2026-2027:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregates, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | - | sqm | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | - | cum | - | - |
| 1.004 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | - | sqm | - | - |
| 1.005 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | - | sqm | - | - |
| 1.006 | 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | - | sqm | - | - |
| 1.007 | 10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | 1 | kg | - | - |
| 1.008 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | - | kg | - | - |
| 1.009 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_1449118.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.31 MB
Tendernotice_2.pdf
PDF • 0.23 MB
Tendernotice_3.pdf
PDF • 0.18 MB
BOQ_1449118.xls
BOQ • 0.32 MB
93preagmt.pdf
Tender Documents • 0.23 MB
93sbd.pdf
Tender Documents • 1.72 MB
93affidavit.pdf
Tender Documents • 0.21 MB
93FOT.pdf
Tender Documents • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .