DAY TO DAY MAINTENANCE INCL CERTAIN OTHER MISC WORKS, JOINERY AND INTERNAL WIRING AT MD AND OTM ACCN AT HASIMARA MILITARY STATION UNDER GE(S) BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified.

Taking down shutters of any description exc1.00 Sqm but not exc 2.00 Sqm each complete all as specified.

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified.

Taking down shutters of any description not exc 1.00 Sqm each complete all as specified.

M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified.

S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified.

M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified.

M&L Second class hard wood 30 mm thick factory made glazed and skeleton windows, ventilators shutters, open rebated and prepared to receive glass , gauze etc, divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (b) complete all as specified.

S&F Butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified.

S& F butt hinges medium weight, cold rolled mild steel 100mm all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 100 mm long complete all as specified.

S&F in repair aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified.

S&F aluminium handles cast type anodised of 100 mm size complete all as specified.

S&F in repair aluminium handles cast type anodised of 150 mm size complete all as specified.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified.

Supply and fix in repair double action floor spring hydraulically regulated made up of min. 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with aluminium door.

S & F in repair door closer hydraulically regulated, designation No.3, aluminium (die cast) body, universal type, suitable for door shutters of any width complete all as specified.

Hacking out old broken glass of any thickness size,quality or description from metal frames and S&F 3mm thick sheet glass with glazing clips and oil putty complete as specified.

Hacking out old broken glass of any thickness size,quality or description from wooden frames and S&F 3mm thick sheet glass with servieable wooden beads complete all as specified.

S&F in repair Harrison rails (curtain), mild steel, chromium plated with fixing brackets stops, rollers etccomplete all as specified.

S&F 100 mm long MS steel windows handles left and right both complete as directed by EIC including taking down old one.

S&F in repairs aluminium mortice lock with 4 leaver vertical type size 75mm

S and F for factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm 9+-0.2mm).Window profile with hollow section with multi chamber. Frame(88mmx52mm), sliding sash(42mmx67mm).Sliding meah Sash(24.5mmx57mm) sliding interlock(One vertical length in each shutter)(45.5mmx28mm),glazing bead(24.5x16mm)will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc,making arrangement for fixing of hardware,EPDM gasket,1.2+ -0.2mm thick galvanised steel frame(30mmx18mm) 2no,sliding sash(30mmx18mm),sliding mesh sash(26mmx10mm) Profile to be inserted in required profile,frame will be fixed to the wall with 8mmx100mm long fastenerers,Hardware (Touch lock of zine alloyed(white poweder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and required accessories.

Contd/---Item No 33.00 ( Note: The unit rate quoted by contractot excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose) (A) Area not exceeding 2 Sqm Each

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified.

S&F fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugation side lap fixed with coach screws and washers in roof, wall etc complete all as specified.

Dismantling timber scantlings 40 sqcm and over in section as in framed work in any position complete all as specified..

M&L for second class hard wood (SAL) in scantlings clean swan in framed work as in rafter purlines etc complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified.

M&L for non Asbestos ,fibre reinforced standard cement board as in celiling ,4mm thick designer board (610mm x 610mm ) complete all as specified and as directed

All as per item no 42 here in before but made out of 6mm thick gypsum ceiling board

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.

M&L Brick work using Fly Ash bricks with sub class 'B' bricks curved on plan with mean radius not exc 6m with bricks roughly cut to radius or bricks with wedge shaped joints built in cement mortar 1:6 complete all as specified.

M&L fly ash Brick work using modular size bricks thick honey comb walling built in cement mortar 1:4 complete all as specified.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cementcomplete all as specified.

M&L for external rendering 20 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 10 mm thick in CM 1:4 mixed with WPC all as per manufacturer's specification on brick work or concrete surfaces of wall and finished even and fair complete all as specified. Note-WPC shall be measured and paid seperately.

Material and Labour for preparation of new plastered surfaces and applying of two coats of cement base paint o wall surfaces complete all as specified.

M&L for applying two coats of acrylic distemper on newly plastered wall surface including preparation of surface over a coat of 1mm thick Birla wall care putty complete all as specified.

M&L for preparation of newly plastered surfaces of walls and apply Two coat of white wash complete all as specified.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth using extra cement complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surface /skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including rendering 10 mm thick in cement mortor 1:4 complete all as specified.

M & L glazed (coloured) ceramic tiles of size 300 x 450 x 7mm thick on vertical surfacessuch as dado/skirting/risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of liles over and including rending 10 mm thick in cement mortar 1:4 complete all as specified and directed.Note- (i) The size of tiles (except Thickness) may be varied during execution without any price adjustment.

M&L 16-18 mm thick granite stone slab of approved size set and jointed with neat cement slurry over 15mm thick bedding layer in CM (1:6)

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 15 mm thick screed bed or bedding layer in CM 1:4 surface finished fair and even for laying floor finishescomplete all as specified.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including rendering 10 mm thick in cement mortor 1:4 complete all as specified. complete all as specified.

S& F in repairs 5mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified.

S&F in sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long, complete all as specified.

S&F in repair 0.56 mm thick aluminium sheeting bend to shape fixed with pins to door shutter to prevent water splashing complete all as directed by Engr-in-Charge.

S&F Brass CP toilet paper holder fixed with screws as fixed in repair complete as directed.

M & L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupbord door/shelves/wall panelling including 6 mm thick wooden leaping and dismantling of old boardingcomplete all as specified. (NOTE : the cost is including polished to wood surfaces)

S&F 12mm thick plywood with commercial finish as in pelmet,shelves,drawers, cupbord shutters, partions etc complete.

S& f powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at ns, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief

Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified.

M&L for RCC (nominal mix) 1:2:4 type B1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified. Note - Reinforcement and form work shall be measured and paid separately.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concretecomplete all as specified.

Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Taking down tarfet with cement plaster from roof surface and lowering and removing the same to a distance exc. 500m and n.exc. 900cm incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to reomve all loose etc all as specified and as directed.

M & L for 10mm thick screedd bed or bedding layeres in cement mirter (1:4) in order to maintain proper slope over existing roof surface for applying single component acrylic polymner modified, fininshed even and smooth without using extra cement mixed with water proofing compound complete all specified and as directed. Note :- Polymeric membrane and WPC shall be measured and paid spearately under relevant items of this Sch 'A'.

M& L 25mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) mixed with water proofing compound and laid on RCC slab as base layer for roof tratment rufning the topo surface of concrete b using broom stick while he cocrete is greencomplete all as specified. Note:- WPC paid separatly under relivant items.

Supply only liquid water proofing compound

M& L water proofing treatment to RCC roof slab including parapet comprising of the following course of tretment/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surface of roof including parpet surfaces. Bitumnious primer shall be 'Tar Mastic' manufactured by M/S STP LTD or 'EMW FLATE; manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrane with non woven polyster fabric weight not less than 160 gms per sqm. Polymeric membrane shall be taken to a height of 60cm (mim) and than inserted th groove of perafit wall and shall be finished a membrance flashing (c) Application of two coats of Bituminous aluminum paints over the polymeric memnrance after necessary preparation and cleaning

Contd/---Item No 81.00 Note :- Laying APP based polymeric membranceshall be done by tourch on mathod or as per manufacture insturction. (ii) A minimum overlap of 100 mm shall be maid at the end 75mm shall be maid at the side and sealed overlaped and joint as per manufacture instructions. Make :- "SUPER THERMOLAY" manufacturer by STP Ltd of MOPLY FP manufacture by Texsa India Ltd.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications.

Contd/---Item No 88.00 Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.

(b) As per Item No 84 but on One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) As per Item No 84 One socket out let 5/6 amps point on the same board

(d) As per Item No 84 One socket out let 5/6 amps point on the independent board

(e) As per Item No 84 One bell/buzzer point controlled by one bell push button

All as per item No 84 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified.

M&L point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVC doubled lock Casing-Capping and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessoriescomplete all as specified. 5/11/2024 (a) One light point controlled by one way switch 5/6 amps.

(b) As per Item No 91 but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

(c) As per Item No 91 One Socket out let 5/6 amps point on the independent board

(d) As per Item No 91 One socket out let 5/6 amps point on the same board

(e) As per Item No 91 One bell/buzzer point controlled by one bell push button

All as per item No 91 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified.

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash typecomplete all as specified. by Engr-in-Charge.

S&F Switch socket combination 2 in 1, 5A, multipin, flush type

S&F Switch socket combination 3 pin 16A, multi pin, flush type

S&F switch piano flush type 15/16 amps single pole one way complete all as specified.

S&F bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified.

S&F of call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified.

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified.

S & F lamp holder, isolated body, with back plate suitable for batten/angle fittings complete all as specified.

S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified.

S&F Modular switch 1 way 6A,1 module single pole complete all as specified.

S&F modular socket 2 /3 Pin combined 2 module, 6 amps, complete all as specified.

S&F modular socket 2 /3 Pin combined 2 module, 6/16 amps, complete all as specified.

S&F Modular switch 1 way 16A,1 module single pole complete all as specified.

S & F modular fan step regulator 120 W, 2 module complete all as specified.

S&F modular bell push 6 amps 1 module complete all as specified.

S&F Modular switch 2 way 16A,1 module single pole complete all as specified.

S&F Modular white cover plate with frame 1 module complete all as specified.

S&F Modular white cover plate with frame 3 module complete all as specified.

S&F Modular white cover plate with frame 6 module complete all as specified.

S&F Modular white cover plate with frame 8 module complete all as specified.

S&F Modular white cover plate with frame 12 module complete all as specified.

Supply and fix in repair IP 25, class I, LED tube light fittings 40W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with complete all as specified.

Supply and fix in repaire LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified and as directed.

Supply and fix in repaire IP 20, LED Mirror light fitting 20 W, (or nearest next higher wattage) wall /Surface mounted with integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified.

Supply and fix in repaire Decorative luminiare suitable for wall light fixture including LED lamp 1x09 watt ( B-22 base) ,made of unbrakeable Polycarbonate with Acrylic decorative diffuser, IP-65 protection, and provision of PVC insulated sheathed round flexible wire with multi stranded copper conductor of size 2.50 Sq mm two corecomplete all as specified.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection with blanking plates complete including necessary taking down all as specified.

S&F MCB, Triple pole & neutral, 32 amps, 415 volts, ‘C’ curve, 10 KA all complete including taking down the old onecomplete all as specified.

S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old onecomplete all as specified.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old onecomplete all as specified.

Supply and fixing LED post top light 25 W made in die cast aluminium bottom housing and aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection complete including necessary taking down all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including necessary taking down all as specified and directed

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old onecomplete all as specified. by Engr-in-Charge.

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M & L Sub main wiring casing caping type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC casing caping of size 25 mm medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer including necessary taking down.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete including necessary taking down all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation of poles/stays/cables etc and getting out in any type of soil.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers n.exc 25cm.

Removing excavated material n.exc 50m and depositing were directed at a level n.exc. 1.5m above the starting level.

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compactioncomplete all as specified. by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I)

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete including necessary taking down all as specified and directed

Supply and fixing 40 mm dia GI tubing medium grade ISI marked laid in trenches / laid under floor for protection of cable including all fittings such as elbow, bends, etc and short length complete all as specified.

Supply and fix suspended architectural 20 Watt LED lumimiare provides soft-light and glare free symmetrical illumination (with continous mounting and cap) including provision of three core PVC cable of copper conductor of size 23/.0076 and making connection completeincluding necessary taking down all as specified.

Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store and refixing the same after necessary repair works complete all as specified by Engr in charge

M & L for painting of ceilling fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting , complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as spedified and directed.

M & L for rewinding of coils of ceiling fans of sweep 1200/1400 mm of any make by using super enamelled copper wire as per existing gauge and approved quality including heat varnishing drying up overhauling and testing complete all as specified and as directed.

All as per item ser No 145.00 here-in -above but of exhaust fan of sweep 300mm to 380mm

Supply only parts /components of ceiling fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 143 here in before). (a) Gun metal bush metal bush of any size.

(b ) As per Item No 147 Ball bearing .(Bearing No 6201/6202 as per site requirement)

(c) As per Item No 147 Paper condenser 2.5 MFD

(d) As per Item No 147 Connector bakelite two terminal each end

(e) As per Item No 147,Rubber bush with MS bolt and nut

(f) As per Item No 147,PVC canopy for ceiling fan of as specified.

Supply only parts /components of exhaust fan as per existing make and size complete all as specifed and as directed (Note : Parts and components supplied under this item shall be fixed under item No 143 here in before). (a) Gun metal bush bearing

(b) As per Item No 153 Ball bearing

(c) As per Item No 153 Paper condenser 4 MFD

(d) As per Item No 153 Set of exhaust fan blades with screws (Set of three blades)

M & L in replacement for down rod of 30 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with white paint suitable to ceiling fan of any description , make , brand and model after taking down old existing unserviceable down rod complete all as directed at site.

M & L in replacement for MS louvers with nuts, bolts and washers suitable to exhaust fan 300/450 mm sweep of any description make and model after taking down old existing unserviceable PVC MS louvers complete all as directed.

M&L in replacement for suitable frames of 300/450 mm sweep exhaust fan of any description make and model after taking down old existing unserviceable frames complete all as directed.

M & L in replacement for standard MS clamps with rubber shoe with bolts suitable to exhaust fan of any description, make and model after taking down old existing unserviceable clamps complete all as directed.

Supply fix in repairs blade set (set of three blades) 1200/1400 mm sweep as per existing make and size all as specified.

S&F in repair Paper condenser 2.5 MFD

S&F in repair Paper condenser 4.0 MFD

Supply and fixing in repaire of Surge protector Type 1+2, 3P+N, I max 50 KA, 4 module with DB for installation at signal centre after taking down old existing unserviceable clamps complete all as directed.

SHRI SURAJIT SIKDER

M/S. MANOJ KUMAR AGARWALL

M/S RATHIN ENTERPRISES

M/S ROY ENTERPRISE

Hanuman Prasad Agarwal

M/S BISHAL ENTERPRISES

BHARAT ELECTRIC