Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹12.1 L+₹6,128.46 (0.51%)Rejected-Finance H NO 963 10 STREET NO 5 DEEP NAGAR CIVIL LINES LUDHIANA 141001 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L2 | Rejected-Finance Other than lowest |
Tender Value
₹12.1 Cr
EMD Value
₹24,288
Closing Date
8 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
PROVN OF 01 X TOILET NEAR ATT OR LINES BLDG NO T-304 OF HQ AD BDE CAMP AT DHOLEWAL MIL COMPLEX UNDER GE LUDHIANA
2022_MES_537119_1
GE/LDH-26/2022-23
Open Tender
Civil Works
Item Rate
180 days
Dholewal Cantt unde GE Ludhiana
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
Yes
GE Ludhiana
₹24,288
Yes
30 Aug 2022
11 Jul 2022
9 Aug 2022
11 Jul 2022
8 Aug 2022
25 Jul 2022
11 Jul 2022 - 24 Jul 2022
Amount
Sch 'A' sec-I
Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 Mtr in depth for foundation in soft/loose soil and getting out.
M & L for PCC Type D2, 1:4:8, as in foundation filling and mass concrete.
M&L for bricks work with sub class B brick straight or covered on plain exc 6m means radious built in CM 1:4 all as specified & directed by Engineer-in-charge.
M&L for brickwork with sub-class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified & directed by Engineer-in-charge.
M&L for RCC M-20 by volume 1:1.5:3 (20mm graded aggregates) in plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M&L for RCC M-20 by volume 1:1.5:3 (20mm graded aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span as Specified.
M&L for RCC M-20 by volume 1:1.5:3 (20mm graded aggregates) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work
M&L for formwork to soffits of sus-pended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Hori-zontal or sloping) Complete all specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality con-forming.
M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality con-forming.
M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 mixed with integral water proofing compound with finishing cement concrete even and fair and applying 2 coats of cement based paint finishing including preparation of new plastered suraface. Note:-water proofing compound Measure and paid separatly.
M&L for rendering 12mm thick on other than fair faces of brick work in CM 1:6 with finishing cement concrete even and fair and applying two white wash on internal surfaces of walls incl preparation of newly plastered surface.
M&L for rendering 5mm thick in CM 1:3 to surfaces of ceiling and apllying 3 coats of white wash on ceiling including preparatin of new plastered surfaces.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer
M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as specified and directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site.
S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete.
S&F for 3mm thick figured glass, pin headed type and glazing with oil putty in squares n exc 0.5 Sqm in each pane all as specified and directed.
S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks or galvanised wire staples.
S&F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100mm long.
S&F for extruded aluminium alloy handles, fabricated type, anodised 125mm long
S&F for aluminium anodised, barrel tower bolts of extruded section 150mm long.
S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections ans fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, 200mm long complete all as specified and directed.
M&L for hardcore of broken stone boulders of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface all as specified and directed.
M&L for 100mm Thk. PCC 1:4:8 type D2 under flooring ,using 40mm graded stone aggregates as in sub base complete all as specified and directed.
M&L for 25mm thick cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as in sub floor complete all as specified and directed.
M&L for Non skid ccerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.06 sqm but n.exc. 0.11 sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:4) all as specified and directed.
M&L for glazed ceramic coloured tiles (300x450mm) x 6-7mm thick on vertical surfaces etc, set and jointed in neat cement slurry and pointed in white cement to match such skriting /dado and risers to steps etc laid over and including bedding layer of 10mm thick in cement mortar 1:4 complete all as specified and directed.
M&L for 50mm thick PCC 1:2:4Type B-1 using 20mm crushed stone aggregate as in plinth protection and finished even and fair complete all as specified and directed.
M&L for 15mm thick rendering on terrace, sides of parapet in cement mortar 1:4 with water proofing compound , finished even and fair.(Note water proofing compound will be measured and paid separately under other item.
M&L for cleaning the new plastered surfaces with wire brushes, brooms etc and applying a priming coat of bitumen primer @ 0.30 ltrs/Sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil.
M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/Sqm ) land on after applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2Kg per Sqm by forced application complete all as specified.
M&L for applying a coat of industrial bitumen 85/25 at the rate of 1.2Kg per sqm with forced application above APP based polymeric membrance.
M&L for applying a two coats of water proofing paint with Aluminium finish over coat of industrial bitumen 85/25 on roof complete all as specified.
S & F for squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foor rest etc complete all as specified and directed. Make: Hinduware/Cera/Nycer/parryware or equivalent approved by Engineer-in-Charge.
S&F for PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .
S&F for vitreous china urinal, bowl type complete flat back size 465x35x265 mm white with grating union incl urinal spreader and discharge pipe including brackets .
S&F for vitreous china wash basin with vitreous China Pedastal, white, flat back, size 550 x 400mm, including brackets incl 32mm bore CP waste coupling.
S&F for soap dish fixed to walls with chromium plated brass screws.
S&F for brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange.
S&F for type pillar taps 15 mm bore cast copper alloy with capstan heads chromium plated ,scrwed down high pressure, with or without lettered hot or cold with long scrwed shanks and fly nuts-nuts scrwed for iron pipe and fixed complete all as per specified.
S&F for bib taps fancy type chromium plated with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule for 15mm bore.
S&F for angle valve chromium plated cast copper alloy with, screwed down, high pressure with fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
S&F for PVC connections 15mm size with PTMT nuts of lenth 450mm
S&F for rotational moulded polythylene water strarge tanks 500 ltr (Cylinderical vertical with closed top ) hoisted and fiexed in position all as per specified in SSR Pt-1.
S&F for 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.
S&F for 15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors.
S&F for 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F for 20mm bore brass ball valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed.
S&F for 100mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors.
S&F for 75mm bore CI branch pieces with oval access door, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches
S&F for 75mm bore cast iron soil, waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors
S&F for 75mm bore cast iron cowls
S&F for cast Iron floor traps 75mm bore, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).
M&L for PCC type B1 (1 : 2 : 4) using 20mm graded stone aggregate as in Manhole coping including necessary form work complete all as specified and directed.
M&L for precast cement concrete 1:1.5:3 type A-1 by volume using 20mm graded aggete as in cover slabs (for manholes etc.) including necessary form work and set in cement mortar 1:6 all as per specified and directed.
M&L for 10 mm dia and above Mild steel bars cut to length bent to shape reqd incl cranking,bending, hooking ends and with and incl mild steel wire (annealed) not less then 0.9mm dia or securing with clips.
M&L for Cement concrete type C2 (1 : 3 : 6) using 40mm graded stone aggregate as in concrete bed to SGSW/RCC drain pipe in any depth including packing under, and haunching against the sides of pipes after they are laid and tested all as specified.
S&F for Reinforced concrete pipes 150 mm bore , class NP3, laid and jointed complete with collars complete all as specified and directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound and finished even and smooth without using extra cement complete. (Waterproofing compound measure and paid separately)
Supply of integral water proofing compound confirming to IS-2645.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required.
M&L for 100mm thick PCC 1:4:8 Type D-2 using 40mm crushed stone aggregate as in sub base floor.
M&L for 60 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand.
M&L for Sand filling under interlocking tiles complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates, coping, kerbs, water trough and like incl. rounded or chamfered on edges.
Removal of surplus soil to a distance n.exc 50 m and depositing where directed at level not exceeding 1.5 m high above the starting point complete all as specified & directed by Engineer-in-charge.
Returning filling in including, spreading, leveling watering and well ramming in layer not exc 25 cm all as specified & directed by Engineer-in-charge.
M&L for point wiring with PVC FRLS insulated and PVC sheathed cable with copper conductor single core size of 1.5 sqmm in and including heavy duty PVC conduit ISI marked in concealed in walls, ceiling etc, for one light / fan / bell point controlled by one switch including replacing exisiting switch boards/boxes with new MS concealed terminal boxes with 3mm plastic laminated sheet top cover,earth contiunity wire PVC insulated sheathed 1.5 sqmm solid copper conductor cable connected to common earth dolly all as specified. :-
One light/fan point controlled by one, one way switch
One switch socket outlet point 5 Amps on independent board.
One 3 Pin socket outlet, 5 Amps on the same board with other switch.
M & L for point wiring with PVC (FRLS)unsheathed, fire resistance, stranded copper conductor of size 2.5 sqmm (nominal cross sectional area ) single core cable in and including rigid non metalic PVC conduit 20 mm dia or higher size "medium " grade ISI marked concealed (surface only on roof & colomns) complete with all accessories/fittings and MS box thickness not less than 1.2 mm covered with 3 mm thick plastic laminated hard glassy surface sheet cover concealed in wall with screws & washers including unsheathed single core PVC insulated cable green in colour 2.5 sqmm stranded copper conductor as earth wire and connecting to earth dolly, for one three /six pin 15/16 amps power socket controlled by one 15/16 amps switch complete all as specified & directed.
Supply and fix for exhaust fan, heavy duty 300mm sweep with louvers, 1400 RPM and connecting up including provision of copper and flexible 3 core of size 0.5 sqmm and PVC connector block complete all as specified. Make :- Crompton/Bajaj/Havells/Philips
Supply and fix for LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed. Make :- Crompton/Bajaj/Havells/Philips
Supply and fix for SPN MCB DB 8 ways with 200 Amps rated bus bar 240Volt, Double door type complete all as specified and directed.
S/F for MCB SPN 6- 32 Amps 240Volts, 10kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.
S/F for SP MCB 6-32 Amps 240Volts, 10 kA, C-series, 50Hz 10kA bracking capacity complete all as specified and directed.
Supply and fix for ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and directed.
Supply and fixing for switch piano flush button single pole one way 5 amps,230 volts.complete all as specified and directed.
Supply and fixing for switch piano flush button single pole one way 15 amps,230 volts.complete all as specified and directed.
Supply and fixing for socket outlet 3 pin,5 Amp multipurpose flush type complete all as specified and directed.
Supply and fixing for socket outlet 2 in 1,3 pin, 5 & 15 Amp flush type complete all as specified and directed
M & L for earthing incl necessary earth work complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.
Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2.0 core Complete all as specified . Make :- Havells/Polycab/Glostar
Supply and fixing for bldg security light fitting LED energy saving & envoirmental friendly, long life versatile, pressure die cast aluminium IP66 with high power LED lamp 30 W LED 6000K incl with suitable bracket compete all as specified and directed. Make :- Havells/Bajaj/Philips
M & L for returning filling in including spreading leveling watering and well ramming in layers each not exceeding 25 cm thickness complete all as specified and as directed.
M & L for removal of surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M & L for sand cushioning to UG cable with a layer of fine sand 8 Cms thick before laying of cable and 15 Cms thick after laying of cable in trenches complete all as specified. Note:- sand cushioning thickness shall be measured as 18 cm after punning down.
M & L for old size sub class 'B' bricks,laid flat in trenches over the cable with length of brick perpendicular to the direction of the cable, adjacent/abutting each other complete all as specified.
M &L for cutting the exiting GI 40/25 mm dia taking branch connection 25mm dia including necessary GI fittings/Specials.
Supply & fixing for galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.
Supply & fixing for galvanised iron tubes of size 20mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.
Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified & directed.
Supply & Fix for gun metel gate valve heavy duty ISI marked with iron wheel head screwed both ends for iron pipe 25mm dia complete all as specified & directed.
ANUJ ABROL CONTRACTOR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_600371.xls
BOQ Document • 0.34 MB
101413300.pdf
Tender Document • 0.07 MB
Tender262022-23.pdf
Tender Document • 0.56 MB
101413302.html
Tender Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .