WBMAD/ULB/HM/NIT-44e/2025-2026 Sl No-42

Supplying and Delivery of 45watt LED Street Light in Poles at Different Roads and Places within Haringhata Municipality Area. as per approved vendor list UD & MA Technical specification duly approved and communicated vide memo no. 1528(3) UD & MA -13013(99)1312020 estt-TCP SEC depertment of UD &MA dated 08/12/2020 [UD & MA Sch.]

Supply & Delivery of Swaged Steel Tubular Pole (IS 2713, Pt. II 1980) 07 Meter Long Steel Tubular Pole 410-SP-1; 7.0 mtrs; 62 Kg (Subham/BPP/Calcutta Pole) (UDMA P-3, 1 (d))

Erection of 1 nos 7.0 meter long Steel Tubular pole after preparation of RCC Foundation of 400mm x 400mm, 1500mm hight (1200mm below the ground level and above 300mm on ground) with required Rod, cement, chips & sand etc at the ratio 1:1.5:3 with ground bolt. (PWD, H1, 1(a))

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open trench for single, 2, 3, 3½ & 4 core

Supply, delivery of 1.1KV grade 4 Core x 10 sq.mm XLPE Insulated PVC sheathed Al armoured Cable (Havells/Mascab/KEI) as per IS-7098 (Glostar, Polycab)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed PWD Sch Page-F-2-1(a)

Supplying and fixing 6AMP SP: 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (6–32A L&T Make) PWD Sch Page-D-6; Item-7

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 4 core 10 sqmm cable PWD Sch Page-F-4; Item-7(c)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials (xi) 4 core 10 sqmm cable PWD Sch Page-F-5; Item-8(b)

Connection of Luminaires with 1 no 3C x 1.5 sqmm PVC insulated FR copper conductor (Finolex/Havells) through pole from looping box to light fitting as required

Supply & Fixing of GI Earth Spike (1830 x 20mm) with 06 SWG GI wire (1 Nos at each pole) [WBSEDCL Rate]

Fixing only street light fitting with suitable tie clamps & MS plate for mounting on pole or similar structure

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings and jointing materials as required 40 mm dia PWD Sch Page-F-6; 11©

S/F projected lamp bracket made 50mm dia G.I. Pipe of 1.85 M (6’) in length of which 0.9M (3’) In Projection having an angel of 105 degree with clamps, bolts, nuts & clamps, etc. as required. (UD & MA Sch. Item-19, P-16)