REPAIRS/MAINT OF BOUNDARY WALL, HARD STANDING, FENCING, DRAINS, FOOTPATH OTHER MISC WORKS AT OTM ACCN OF OL HL BARODA

Amount

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, complete.

Removing building materials etc. to a distance exc 1km and not exc 5km, including loading, unloading and stacking at the destination complete.

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete.

Taking down cement plaster on brick / concrete surface including scrubbing down with water etc. Complete

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4 for finished even and fair (without using extra cement) complete.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint & matching to existing of wall surface complete.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete

M&L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement complete.

M&L for Forming 65mm deep x 10mm thick contraction (dummy joints), filled with sealing compound grade "A" complete.

M&L preparing new plastered surfaces of wall and applying two coats of weather coat paint over a coat of primer on external wall complete.

M&L preparing of existing old plastered surfaces of wall and applying one coats of weather coat paint over a coat of primer on external wall complete.

M&L for 75 mm thick cement concrete in sub base for path/paving flooring type D-2, 1:4:8 (40mm graded aggregate) for laying cement concrete tiles complete.

M&L for prepolished chequered cement concrete tiles machine pressed 30cm x 30cm x 25mm thick, over cement screed base 20 mm thick in cement morter 1:6, set, jointed and pointed in neat cement slurry in floors etc complete.

M&L for 100 mm thick PCC 1:2:4 mix, type B-2 Using 40 mm graded stone aggregate finished even and fair without using extra cement as in path/hard standing complete

M&L for Extra forming fair finished drain or channel 40cm inner girth in cement concrete, using exrtra cement, incl forms, moulds etc complete

M&L for Filleting in any position and to any shape Exc. 25 but n exc. 50 sq. cm in cement mortar 1:4 including all mitres, stops, etc. Complete

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, brick masonary etc complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50m and making good surface complete.

M&L for plain cement concrete (PCC) 1:3:6 type C2 using 40mm graded stone aggregate as in boundry pillars and posts footing etc. Complete

M&L for mild steel work confirming to Fe-290 Gde E-165 in angle iron posts & struts in fencing and in compound walls including cutting top to shape as directed, drilling holes, notching for wire, etc. and including flat iron filletes for securing wire mesh or fence etc. including all necessary bolting riveting etc complete.

Supply only Chain link Mild Steel galvanisd fencing with 4mm dia made up to mattresses with mesh of size 50 x 50 mm as approved.

Fixing only steel chain link fencing including line wires, any mesh size and type to any standards, rails, steel bars, straining bolts, etc, including provision of binding wire complete.

Supply only 10mm dia plain round bars for fixing in chain link fencing horizontial including ends of bars hooked conforming to Fe 290 Gde E-165.

S&F for mild steel screw bolts machine made with haxagonal head at one end and screwed other or screwed both ends each screwed end to be fitted with washers and one hexagonal nut, not exc. 5 cm long and dia of sunk 11 to 15 mm complete.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces complete.

Cutting holes exc 400 Sqcm but n. exc 1 Sqm into or through brick walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required complete

Use and waste formwork for rough finished flat surface of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete

S&F in repairs concertina coil fencing with punched tape conncentrina coil upto 610mm dia 10m open length having 50 Nos rounds per 6m length,spring core 2.5mm tk fixed to upto existing 'Y' Shaped neck upto 4 m height of wall with stud tired with necessary GI clips , stables to retain both horizontal & vertical bond/bind with necessary bolts, nuts or fixed with birbed wire etc complete.

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar complete.

M&L coloured Machine pressed polished precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment on sand bed complete.

M&L sand filling under floor or in foundations including watering and consolidation complete. Note: Punned thickness shall be measured.

M&L PCC 1:3:6 type C1 (using 20mm graded agg) as in coping incl use of form work (straight or curved) weathering. Slightly rounded or chamfered angles and throating complete.

M&L cement concrete in surface channels and drains type D2 1:4:8 (using 40 mm graded aggregate) complete

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using exrtra cement, incl forms, moulds etc complete

M&L for preparation of new plastered surface of wall and applying three coats of white wash complete.

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint matching to existing of wall surface complete.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or not exc 10 Sqm on plan and not exc 1.5m in depth for shafts, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil complete.

Excavation in trenches, n exc 1.50m wide and exceeding 1.50 m but n exc 3m in depth for foundation, etc. or not exc 10 Sqm on plan and exc 1.5m not exceeding 3m in depth for shafts, cesspits, manholes, pier holes, etc. and getting out in soft/loose soil complete.

Returning, filling in, excavated approved soil spreading, leveling, watering and well ramming in layers not exc 25cm thick each complete.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete.

Demolition and breaking up drain pipes of Internal dia 100mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in CM complete.

M&L for UPVC 100mm (SCH-40) dia pipes for sewage line in existing of Stone glazed stone ware pipe complete.

Demolition and breaking up drain pipes Internal dia of 150mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in cement mortar complete.

M&L for UPVC 150mm (SCH-40) dia pipes for sewage line in existing of Stone glazed stone ware pipe complete.

Demolition and breaking up drain pipes Internal dia of 200mm (Salt Glazed Stone Ware, AC or Reinforced concrete), set in cement mortar complete.

M&L for Salt glazed stoneware drain pipes Internal dia of 200mm bore, grade 'A' laid in trenches and jointed complete.

M&L for concrete bed to drain pipes 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete.

M&L for concrete bed to drain pipes 150mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete.

M&L for concrete bed to drain pipes 200mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate including demolition of damaged concrete complete.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1, using 20mm graded stone aggregate smooth finished and reforming benching as required for internal dia of pipe 150mm complete.

S&F in repairs precast reinforced cement concrete drain covers, factory made in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate with and including reinforcement of 8mm dia TMT bars at 150mm c/c both ways and handles 2 Nos each cover made of 12mm dia MS round bar, set in CM 1:6 complete, thickness and sizes of covers shall be as directed complete.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete.

M/S Badri Electicals

Harsh Infrastructure