8304 SPECIAL REPAIR/REPLACEMENT TO BORE WELL AT PUMP HOUSE NO. 3 AND PROVN OF CHAIN LINKED FENCING FOR SECURITY OF B CHARGE QTRS AT RTS AND DEPOT HEMPUR UNDER GE (EAST) BAREILLY.

Amount

Transportation of direct rotary or reverse rotary drilling machine complete with drilling bits, drill shaft and all other accessories required complete with erection of camp of site and removal of all tools and plant on completion of job complete all as specified and directed

M & L for development of trial bore by Reaming up to 675 mm in any kind of soil strata including hard stone/ boulder etc from ground level to 60 mtr depth, including assembling, lowering and fixing in position of 350mm dia MS Pipe welding in position MS sleaves 350 mm, 8mm thick and pea gravel, necessary cleaning painting complete all as specified and directed. Note:- MS ERW Pipe 350mm dia shall be measured and paid separately.

M & L for development of trial bore by Reaming up to 525 mm in any kind of soil strata including hard stone/ boulder etc from exceeding 60 mtr below GL to upto 250 mtr, including assembling, lowering and fixing in position of 250mm dia MS ERW Pipe welding in position MS sleaves 250 mm, 8mm thick and pea gravel, necessary cleaning painting complete all as specified and directed. Note:- MS ERW Pipe 250mm dia shall be measured and paid separately.

M & L for drilling of trail bore hole with direct or reverse rotary mechanical rig with appropriate size drill bit as required from GL to the depth shown in below for lowering suitable size of casing/ housing / stainer pipe 350 mm respectively with a provision of a space for and including filling pea gravel 3mm to 6mm all as around the housing /casing /stainer pipe all as specified and directed for the following :- Note: Casing pipe and column pipe shall be measured and paid separately.

From ground level to 50 mtr depth including making of initial bore hole.

From a depth exceeding 50 mtr below ground level and upto 100 mtr depth all as directed

From a depth exceeding 100 mtr below ground level and upto 150 mtr depth all as directed

From a depth exceeding 150 mtr below ground level and upto 200 mtr depth all as directed

From a depth exceeding 200 mtr below ground level and upto 220 mtr depth all as directed

M & L for MS ERW Casing pipe of 300mm medium grade both side plain end including MS sleaves width 350mm, 8mm thick suitable for 300mm MS ERW pipe welding at joints etc, complete all as specified and directed.

M & L for MS ERW Casing pipe of 200mm medium grade both side plain end including MS sleaves width 250mm, 8mm thick suitable for 200mm MS pipe welding at joints etc, complete all as specified and directed.

M&L for additional cost for slotting to pipe size 300 / 200mm bore with slot opening 1mm wide and 10cm long at regular interval uniformly distributed percentage of slot should be 20-22 % in each pipe, complete all as specified and directed.

S&F jointing and lowering of MS reducing socket made out of MS plate 12mm thick plate of size 300/200mm bore MS ERW pipe including necessary welding complete all as specified and directed.

M&L for well cap in two pieces made out of 6mm thick MS plate suitable for 300mm housing pipe to provide cover at top of tube well complete with suitable locking arrangement using 25mm dia 400mm long MS bolt slotted through the cap and casing pipe with suitable lock complete all as specified and directed.

S&F in any position centre guide made of MS flat iron size (40x6mm) at an interval of every plain pipe for 300/100 bore pipe complete all as specified and directed.

Supply and fixing of MS clamp suitable for 300mm dia housing pipe made for 150x20 mm thick plate including bolts/nuts and washers of required size complete all as specified and directed.

M&Lfor strata sample box with glass cover 3 mm thick and having minimum internal dimention 1000mm x 300mm x 100mm made out of stainless steel planks 3mm thick with hinges staple including painting two coats of synthetic enamel paint over one coat of primer complete with soil sample placed in position of planks 20 mm thick . the number of portion may vary with type of soil strata met and over all length of the bore and can be increased beyond 1000mm x 300mm complete all as specified and directed. Note: Strata sample as found while drilling tube well will be kept in the respective pigeon and letter to be painted/ written complete all as specified and directed.

Development of tube well with compressed air 600 PSI and not less than 1200 CFM and after with 25% extra capacity pump by pumping muddy water to make sand free water and testing the yield, complete all as specified and directed.

Yield test for the bore well by continuously pumping for 16 hours to determine using 'V' notch constructed at site, safe pumping yield, complete all as specified and directed and directed.

S & F for Submersible pump & motor 25 HP, Electric driven, 415 Volts, TP, 50Hz, suitable for 200 mm dia bore well casing pipe of size 300/200mm, complete all as specified and as directed.

Supply and laying of 150 mm (6") bore centrifugally cast (Spun) Ductile Iron pressure pipe with spigot & socket end, class K-9 in any length laid in trenches, conforming to IS-8329/2000 with cement mortar lining with and including rubber gasket jointing conforming to IS-15382/tyton joint complete all as specified and directed.

M&L for run lead joint Spigot and socketed pipes and fittings for 150 mm bore of pipe complete all as specified.

S&F for MS Column pipe heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of size 100 mm nominal bore having wall thickness not less than 8mm, electric resistance welded with MS flanged 16 mm thick heavy duty confirming to IS, including 2 mm thick rubber sheet and steel nuts and bolts 10 mm long with washer, complete all as specified and as directed.

S & F for CI Sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm (6”) bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc, including making arrangement for safe working complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar

S & F for CI Swing check reflex (non return) valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm (6”) bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc, including making arrangement for safe working complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar

S & F for Cast Iron Air Valves with two air Outlets, heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 150 mm (6”) bore pipe and fixing Up in cast iron water supply mains including nuts, bolts and jointing with jointing materials etc, including making arrangement for safe working complete all as specified and directed. Make: BIR, KIRLOSKAR, Kartar

Lowering of submersible pump & motor 25HP capacity alongwith column pipe of any size and submersible cable into borewell including packing and nut bolts (if required) and testing after the completion of lowering works in the presence of JE/ Engr in charge.

Take the water sample from the new bore well & two consumer end and send it for physical / Chemical / Bateriological test from any recognised govt agency and provide its report to Engr in charge.

SITC LT Panel, (Water supply) Outdoor type cubical panel board, made out of 2mm thick CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather and vermin proof with proper ventilation slots, IP 52 free standing floor mounted with copper busbar of suitable size for phase and neutral mounted on hygroscopic insulators comprising of the following:- INCOMER (i) MCCB 4 pole 200 A, incomer, 415V, 50Hz, 16 KA - 01 No. OUTGOING (i) MCCB 4 pole 100 A, incomer, 415V, 50Hz, 16 KA - 02 No. (ii) MCCB 4 pole 40 A, 415V, 16 KA - 01 Nos. (iii) FASD Startor 25 HP -02 Nos BUSBAR 400 A rated Al bus bar with colour coded heat shrinkable sleeve METERING & INDICATION (i) Ammeter,Digital type, with suitable CTs (0-400A) - 01 set (ii) Voltmeter, Digital type (500V) - 01 set (iii) R-Y-B phase indicating lamp- 01 set

Material and labour DI Fittings for spigot and socketed pipe Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm.

Supply only Ortho Tolidin solution for testing of dissolved chlorine in water complete all as specified and directed

Supply only Chlorination testing glass test Tube kit complete all as specified and directed

Supply fixing testing and commissioning of PVC insulated and sheathed with multi stranded copper conductor submersible cable flat 10 sqmm x 3 core, 1100 volts grade fixed to submersible motor column pipe using suitable size of clamps made out of stainless steel flat of size 20x2 mm with steel nuts bolts & washer for every column pipe of 3 mtr lengh complete all as specified and directed.

Supply and fixing all in one solar LED street light IP66 with high efficiency mono crystaline solar panel PV module not less than 12V, 32/36W including galvanized steel pole 7 mtr height, in built lithium ferro phosphate battery with in-built BMS technology, capacity 12.8V, 10.5 Ah high efficiency LED 100LM/W, MPPT solar charge controller and aluminium extruded body & is specially programmed to automatically control the dimming and brightness of light, which increase the backup time and minimum 10 Hrs backup. (Note:- Excavation & earth work shall be measured separately)

M & L for construction of brick masonry valve pit of size 90x90x90cm (internal dimension) one brick thick wall built in CM (1:4) on 100mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundation, and 15mm thick rendering in cement mortar (1:4) both externally and internally, external plaster shall be up to 15cm below GL, providing valve pit cover made of 3.15mm thick MS sheet/plate, including provision of hinges, handle and locking arrangement including 40 X 40 X 5mm angle iron frame fixed on top of valve pit by means of MS hold fast 40x5mm and 150mm long, embedded in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including two coats of anti-corrosive paint over a coat of red oxide zinc Chrome primer and necessary earth work in soft/loose soil including demolition of old unserviceable existing valve pit & pit cover complete all as specified & directed.

Supply, installation, Commisioning and testing for Chemical dosing system metering type, capacity to deliver 27LPH max & adjustable from 10% to 100% through Knob and suitable to inject against 5 Kg/cm2 pressure duly operated by 415V/3ph power supply, Chemical Solution preparation tank of 200 Ltrs capacity made out of FRP (made with Bisphenol resins) having port hole on lid for pouring chemical, water inlet connection, overflow and drain with valve, outlet connection with PP ball valve for transferring solution to chemical dosing tank of 100 Ltrs capacity made out of FRP (made with Bisphenol resins) having port hole on lid, inlet connection and tank lid duly mounted with agitator made of Stainless Steel -316 operated with single phase FHP electric motor for dissolution of chemical, dising pump shall be complete with inlet /outlet check valves, strainer cum foot valve and tubing for suction/delivery injection line including fittings, and CGI sheet covered shade of size 2.90m x 2.60m including necessary bricks Pillar, mason works & steel structure support etc, complete all as specified and as directed. Make of dozing system - Chloromax/ Aqua Mech/ Enviro Fab/ ION Exchange.

Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 70 sqmm x 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. (Note-: Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables).

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

Supply and laying new dry river sand laid in trenches 8.0cm below the cable and 15.0cm above the cable and gently punned to 18.0cm as cable cushioning and covering complete all as specified and directed. (Note:- Only punned 18 cm thick sand cushioning shall be measured and paid)

M&L for factory made machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 100 mm thickness M-50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator for repairing road cut / footpath complete all as specified and directed.

Supply, laying factory made un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm complete all as specified and directed.

M&L for Cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.

M&L for GI pipe, light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface, complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete for manholes etc complete all as specifed.

M & L for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregates in surface channels / drains, including necessary formwork, finished to required shape complete all as specified and as directed.

M&L for Mild steel angle cross arms, I-Beam, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated and inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paint (for supporting frame and shed work) complete all as specified and as directed.

M&L for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized iron strip 25 x 4mm by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR Part- I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and as directed. Notes:- (i) The cost of GI earth continuity conductor with GI pipe 15 mm light grade upto 7.5m is deemed to be included in r/o above item. (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement, the cost for the same is deemed to be included in above item.

M & L in replacement Earth continunity conductor or main earth ing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 25x4mm galvanised iron strip complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum getting out returing, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for providing RCC 1:2:4, type B-1 (using 20mm graded stone agg) in precast post fencing post straining or terminal post strut etc. for fencing average sectional area exc. 100sqcm but n exc 250sqcm with or without chemfered angles and flat splayed rounded or meterd tops as directed and fixed.

S&F for framed brackets of angles or tee with web and flanges cut to shape, drilled counter sunk for screw incl bending and welding angles gusset plates etc FE-290(Gde -E- 165) complete all as specified and directed.

Supply only Chain Link, M S galvanised fencing (IS-272) mesh as required but weight of mesh not exc 4.0 kg/sqm complete all as specified and directed.

Fixing only GI chain link fencing of plain GI steel wire of dia 4mm and mesh size (50x50mm) and tying to any type of standard rails, straining with required bolts etc. including provision of binding wire complete all as specified and as directed. (Note: Weight of chain link per Sqm shall be finalised through BOO)

M&L for mild steel deformed or twisted bars 10mm dia for stiffening of the fencing complete all as specified and directed.

M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and directed.

M&L for Mild steel in flat, round or square bars, in available length, conforming to Fe-410-W(Gde E-250) of quality-B complete all as specified and directed.

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm and 15mm dia complete all as specified and directed.

M&L for PCC 1:3:6, type C-2 (40mm graded aggregate) in foundation filling and mass concrete including surface dressing and leveling, complete all as specified and directed. (Note:- this item used at bottom of chain link fencing)

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (Each line wire to be measured)

M&L for Cutting of Existing pipe Line in position up to 150 mm Dia ( CI) & insertion of new GI/CI/DI Tee, branches, collar including jointing material, CI Specials and earth work etc complete all as specified and directed

S & Laying Steel tubing Medium grade GI 100 mm dia with all fittings and fixtures laid in trenches, floor or wall etc complete all as specified and directed.

S & Laying Steel tubing Medium grade GI 20 mm dia with all fittings and fixtures laid in trenches, floor or wall etc complete all as specified and directed.

M&L for lifting of retrived old unsv Submersible Pump Set 15 HP capacity safely from old Bore well with use of necessary suitable T & P complete all as specified and directed.

Supply and fixing of display board of outer size 4.1X1.0 mtr made out of stainless steel of thickness 2 mm at square pipe 8.0 X 8.0 cm with back support of 40X5 mm stainless steel plate fitted at 3 feet interval of board backside including writing name of installation and unit as directed with reflecting tape of any colour as directed alongwith legs of size 8X8 cm square pipe upto the height of 14 feet from ground with foundation with stand 26 km/hr air velocity alongwith 02 nos of spot light at suitable place as directed with point wiring as directed.

Supply and fix 15 W, IP 65 LED post-top lantern Gate lights, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. clear cover offers bright illumination for different applications including monkey protection with suitable covers & electric connection with proper electric supply control and minor mason repairs work on Gate Pillars etc complete all as specified and directed.

VIJAY ENTERPRISES