Site survey including underground utility verification, Engineering, Procurement, Supply, Loading, Transportation, Unloading, Insurance, Delivery at Site, Handling, Storage, Installation, Testing, Commissioning Including Documentation of All Items/Material required to complete works for Turnkey Based Contract For Conversion of Existing overhead LT Line Network Including Consumer Service Lines Into Under Ground Cable Network using FSP/MSP & Ring Main System at Udyognagar Sub Division of Rajkot City-2 Division of Rajkot City Circle Under PGVCL with GIS Mapping / Geo Urja Mapping (Developed by GUVNL) and Asset Tagging under Gujarat Wire Free City Mission. (Package-13)

Conversion of Over Head to Underground Network

Udyognagar Sub-Division of Rajkot City Circle

Particulars of Item Grand Total in Rs.

Particulars of Item Grand Total in Rs.

SCHEDULE-B: CONVERSION OF EXISTING OVERHEAD ELECTRICAL LT NETWORK

IN TO UNDERGROUND CABLE NETWORK

a FOR SUPPLY PART

b FOR ERECTION PART

A TOTAL AMOUNT (WITHOUT GST)

A TOTAL AMOUNT (WITHOUT GST)

3 BIDDER'S OFFER ( + / - ) IN % 0.00%

4 BIDDER'S OFFER ( + / - ) IN RUPEES

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

B OFFERED TOTAL AMOUNT FOR SUPPLY AND ERECTION (WITHOUT GST)

6 GST @ 18% ON "C"

D GRAND TOTAL (WITH GST)

D GRAND TOTAL (WITH GST)

Date Signature of Bidder

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND LT ELECTRICAL NETWORK

Providing & erecting XLPE(IS:7098) (I)-88 ISI marked multistrand

Aluminium conductor armoured cable ,sand for 1.1 kV to be laid on

pole or in existing cable trence/pipe at road crossing of following

size of cables. Work carried out up to consumer premises with

meter shifting, and provide load side cable as per site conditions

and as per EIC. For consumer premises DWC pipe should be

provieded(With Excavation, back filling and sand as per technical

LT CABLE TERMINATION:Cable termination on FSP,LT

Distribution Transformer Box,MSP/SFU /Busbar etc of pole

mounted transformer of LT cable grade as specified below including

cutting,stripping of cable,insulations,providing compression type

terminals,suitable cable glands,crimping lugs with necessary

connections.Work carried out up to consumer premises with meter

shifting, and provide load side cable as per site conditions and as

per EIC. For consumer premises DWC pipe should be provieded.

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

3 Lying of all types of cable in trench(without Excavation) Mtrs. 17302.60 172.50 2984698.50

4 Lying of cable on pole Mtrs. 1730.26 43.70 75612.37

5 Lying of the cable in the Pipe(Without Excavation) Mtrs. 173.03 57.50 9949.23

6 Drilling work in Road Crossing through push through Mtrs. 8651.28 569.25 4924741.14

Drilling work in Road/ASPH/RCC /Hard Rock Etc(Excavation

with back filling as per the specification of cable lying)

8 Supply, intstallation of the DWC pipe(Without Excavation)

Lt cable saddling works: Direct cable saddleing with wall and etc for

this work GI type saddle and nail shall be used.

Supply, Installation, Testing, Commissioning of Half Round

pipe(1000mm Length, 4 inch dia, 1 inch thick)

PRE BONDING TAP: For laying on trench after laying cable on

11 trech to provide indication cable route below land surface in Mtrs. 161976.00 17.25 2794086.00 161976.00 5.75 931362.00

underground trench to protect cable for mechnical injuries.

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of

12 HT/LT cables shall be provided at every termination of all cables Nos 56664.00 27.60 1563926.40 56664.00 9.20 521308.80

stating detail as under. HT Cable :Feeder name/Phase(R/Y/B) LT

Cable : TC/FSP name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of

feeder/PSS/FSP/RMU name of HT/LT cables shall be provided

at every 30 MTR HT Feeder:

Substation/Feeder LT Feeder : PSS/Transformer/FSP

EARTHING PIT : Supplying & erecting earth pit of minimum bore

dia. 150 mm size approved make safe Earthing Electrode consisting

Pipe in pipe Technology as per IS 3043-1987 made of corrosion

free G.I. Pipes having Outer pipe dia of 50 mm having 80-200

Micron galvanising connections, terminal dia of 12 mm with constant

ohmic value surrounded by highly conductive compound with high

charge dissipation with civil works of earthing chamber. For

Electrical installation covering Transformer neutrals,HT & LT

switchgears for independent earthing in normal soil, Length of Pipe

3 mtrs.Backfilling compound 2 bags of 25 Kg each.

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Supply installation & commissioning of earthing conductor 38 x

G.I. strip for pole mounted transformer and upto

15 FSP,RMU,MSP,SFU, Busbar Etc as well as connection to be made Mtrs. 15832.00 158.70 2512538.40 15832.00 59.80 946753.60

to the earth pit. Rates inclusive of hot dipped hardwares.(With

Insulated Sleeve)

Obtaining statutory approval from Electrical Inspector for

installation of the system.

17 DISMENTALLING:

Dismentallling RCC/Rail pole with cross

arm,insulators,hardwares,stay, etc.and return it to discom

store.While dismentalling utmost care shall be taken so that the

material so that the same can be reused by discom.

Dismentalling of AAAC/ACSR/ABC/ Earth wire any size of

b conductor & line material & after making coil and stacking the same Km. 74.42 2300.00 171166.00

at discom store.Routte length

Dismentalling of any type of service connection from the site and

material return to DISCOM store as per directive of EIC

FSP (FUSE SECTION PILLER): 4 Way

Supplying and erecting 120x100x40 cms. Fuse section pillar

fabricated from 4 mm Thermosetting Plastic ( moulded in a single

piece ) i.e Glass Reinforced Polyester sheet Moulding Compound

(SMC ) or metal body(As per Specification and drawings) with cable

clamps to be burried in ground to have appropriate erection on look

unifrom unit erected with cement concrete foundation and 45 cms

high brick masonry internal supported on both side with intrnal and

i outer side locking arrangement with lock and keys in duplicate

.Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base

fitted on 630 Amp current capacity copper Busbar with RYB colour

coding and insulated strip with all internal connections and entry

for incomming up to 1 core 300/400 sq mm 4 nos and outgoing

nos. 31/2 core cables of suitable sizes. (As per Technical

specification of FSP ) (Erection shall be carried out as per approved

drawing and site condition) (SFU Amp Capcity is as under)

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

FSP (FUSE SECTION PILLER): 6 Way

Supplying and erecting 120x100x40 cms.Fuse section pillar

fabricated from 4 mm Thermosetting Plastic ( moulded in a single

piece ) i.e Glass Reinforced Polyester sheet Moulding Compound

(SMC ) or metal body(As per Specification and drawings) with cable

clamps to be burried in ground to have appropriate erection on look

unifrom unit erected with cement concrete foundation and 45 cms

high brick masonry internal supported on both side with intrnal and

ii outer side locking arrangement with lock and keys in duplicate

.Incoming switchgear SFU of TPN and outgoing HRC SMC fuse

base and knife type links 32 Amp to 630 Amp capacity fuse base

fitted on 630 Amp current capacity copper Busbar with RYB colour

coding and insulated strip with all internal connections and entry

for incomming 1 core 300/400 sq mm 4 nos and outgoing 5 nos.

31/2 core cables of suitable sizes. (As per Technical specification of

FSP ) (Erection shall be carried out as per approved drawing and

site condition)(SFU Amp Capcity is as under)

MSP(Mini Section Piller) : 4 Way Supplying and erecting

120x100x40 cms. Mini section pillar fabricated from 4 mm thick

Thermosetting Plastic(moulded in a single piece) i.e. Glass

Reinforced Polyester Sheet Moulding Compound (SMC) or Metal

Body Type Enclouser(As per Specification) with cable clamps to be

burried in ground to have appropriate erection on look uniform unit

erected with cement concrete foundation and 45 cms high brick

masonary internal supported on both side with internal and outer

i side locking arrangement with lock and keys in duplicate. Incoming

HRC SMC fuse base and kinfe type links 32 Amp to 250 Amp.

capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm

Nos. and outgoing 3 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

MSP(Mini Section Piller) : 6 Way Supplying and erecting

120x100x40 cms. Mini section pillar fabricated from 4 mm thick

Thermosetting Plastic(moulded in a single piece) i.e. Glass

Reinforced Polyester Sheet Moulding Compound (SMC) or Metal

Body Type Enclouser(As per Specification) with cable clamps to be

burried in ground to have appropriate erection on look uniform unit

erected with cement concrete foundation and 45 cms high brick

ii masonary internal supported on both side with internal and outer

side locking arrangement with lock and keys in duplicate. Incoming

HRC SMC fuse base and kinfe type links 32 Amp to 250 Amp.

capacity, fuse base fitted on 250 Amp. current capacity copper

Busbar with RYB colour coding and insulated strip with all internal

connections and entry for incoming up to 3.5 Core 300 Sq.mm

Nos. and outgoing 5 nos. 3.5 core cables of suitable sizes.( As per

Technical specification of MSP)

MSP(Mini Section Piller) : 8 Way

Supplying and erecting 120x100x40 cms. Mini section pillar

fabricated from 4 mm thick Thermosetting Plastic(moulded in a

single piece) i.e. Glass Reinforced Polyester Sheet Moulding

Compound (SMC) with cable clamps to be burried in ground to have

appropriate erection on look uniform unit erected with cement

concrete foundation and 45 cms high brick masonary internal

iii supported on both side with internal and outer side locking

arrangement with lock and keys in duplicate. Incoming HRC SMC

fuse base and kinfe type links 32 Amp to 250 Amp. capacity, fuse

base fitted on 250 Amp. current capacity copper Busbar with RYB

colour coding and insulated strip with all internal connections and

entry for incoming up to 3.5 Core 300 Sq.mm 1 Nos. and outgoing

nos. 3.5 core cables of suitable sizes.( As per Technical

specification of MSP)

Supply, Instalation, Testing, Commissioning switch fuse unit made

by metal box and capacity of 125 A, Mostaly used in flat/Socity area.

a Installation worked caried out with instruction of EIC. And as per the Nos. 1321.00 12086.50 15966266.50 1321.00 1150.00 1519150.00

drawing approved by CA- Minimum 16 Nos. of CKT

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by metal box and capacity of 200 A, Mostaly used in flat area.

21 Installation worked caried out with instruction of EIC. And as per the Nos. 66.00 18400.00 1214400.00 66.00 1150.00 75900.00

drawing approved by CA - Minimum 16 Nos. Of Circuit

SFU: Supply, Instalation, Testing, Commissioning switch fuse unit

made by metal box and capacity of 400 A, Mostaly used in flat area.

22 Installation worked caried out with instruction of EIC. And as per the Nos. 66.00 20700.00 1366200.00 66.00 1322.50 87285.00

drawing approved by CA- Minimum 16 Nos. Of Circuit

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

CABLE ROUTE MARKER: Providing and erecting RCC cable route

marker as per drawing No. discom/R&D/RM-001 duly marked with

"DANGER" mark, "discom POWER CABLE" and arrow of route of

DRAWING: Preparing complete drawing of entire network as well as

individual feeder map showing joints also in AutoCad and providing

24 the same to PGVCL in AutoCad copy as ell as pdf copy and hard Job 0.00 15.00 57500.00 862500.00

copy in six sets. The drawing should be geographical indicating all

directions ( Per Job per Feeder )

FENCING: FRP Fencing for FSP/MSP/SFU/BUSBAR, post shall

be made out of FRP Pultruded hollow section of size

50x50x5mm.. and shall be grouted in the ground with c. c. of

ratio 1:3:6., Sub frame provided using hollow FRP section

50x25x5mm or FRP angles 50x50x5 at top and bottom and

other accessories for fixing of gates etc. Rails shall be made

out of FRP notch bars of 12mm dia, Pickets shall be made of

flats of size 35x5mm SMC or FRP as per specifications

Paint Pointed Letter 2 inch size(Marking on FSP, MSP, SFU Etc In

26 any palce.(As per directive of Engineer Incharge) with supply of Ea 14166.00 5.18 73309.05

27 HRC Fuse and its Fuse base(Spare)

28 Jointing Kit for LT Cale

Backfilling and Restoration work including

removing/demolition of existing

Demolition & Providing and lauying cement concrete 1:2:4(1-

Cement:2-coarse sand:4-hand broken stone agreegates 40 mm

nominal size) and suirng complete excluding cost of romwork (For

0.15m thick concrete)

SCHEDULE-B: CONVERSION OF OVERHEAD TO UNDERGROUND ELECTRICAL NETWORK

Sr. Unit Rate in Total Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Particulars of Item Unit Supply Qty. Erection Qty. Unit Rate in Rs Grand Total

Removing & Re-fixing Paver block/re-xast Rubber Dye / steel Dye

Inter locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed/vibrated mechanically and as per

approved design confirming to IS 15658:2006 including 35mm Sand

layer of levelling and filling the joint with sand in proper line and level

as directed by EIC.

18% GST on Total Amount in Rs.

18% GST on Total Amount in Rs.

Grand Total With GST@ 18% in Rs.

Grand Total With GST@ 18% in Rs.

Grand Total With GST@ 18% in Cr.

Grand Total With GST@ 18% in Cr.