SPECIAL REPAIRS TO 11XTOILETS BLOCKS INSIDE ARMY PUBLIC SCHOOL UNDER GE (A) NO 1 JODHPUR

Amount

Taking down or up steel tubing and connection including cleaning for refixing or removal to store complete all as specified and as directed for following bore pipes:-

25 mm dia

20 mm dia

15 mm dia

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed for following bore pipes:-

25 mm dia

20 mm dia

15 mm dia

S&F GI water tubing, medium grade, galvanized, with all fittings fixed to wall complete all as specified and as directed for following bore pipes:-

25 mm dia,

20 mm dia

15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F PVC connections 15mm size 450mm length with PTMT nuts complete all as specified and as directed

S&F PVC connections 15mm size 600mm length with PTMT nuts complete all as specified and as directed

S&F in repair Soap dish, chromium plated, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in repairs 15mm bore three way angle bib cock, chromium plated, fancy type complete all as specified and as directed

S&F in repairs 15mm bore two way angle bib cock, chromium plated fancy type complete all as specified and as directed

S&F in repairs 15mm bore bib cock, chromium plated, fancy type complete all as specified and as directed

S&F in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including Chromium plated waste coupling, chain and plug, 2 Nos PVC connection 15 mm size 450-600mm long and flexible waste pipe complete all as specified and as directed

S&F in repairs Pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore complete all as specified and as directed

S&F PVC low level flushing cistern, 10 ltrs capacity with float valves (ISI Marked) white with complete all as specified and directed.

S&F in repairs vitreous china wash down water closet, European type pedestal pattern with PVC seat & cover, jet spray including fixing of flush pipe etc., complete all as specified and directed.

S&F tubular towel rail, 20mm dia, brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified and as directed (Make:- Jaguar Cat Part No- 1111NM or it's techno commercially equivalent).

S&F in repairs 15mm bore angular stop cock, brass, chromium plated, screwed for iron pipe or ferrule and fixed complete all as specified and directed (Make Jaquar Cat Part No QQT-7053 or it's techno commercially equivalent).

S&F in repairs 15mm bore central hole basin mixer, brass, chromium plated, popup waste system with 450mm long copper pipe and brass nuts complete all as specified and as directed (Make:- Jaquar Cat Part No 7167B or it's techno commercially equivalent).

S&F in repairs 15mm bore Health faucet with 1200mm long flexible tube, wall hook complete in brass, chromium plated complete all as specified, directed and approved by Engineer-in-Charge (Make:- Jaquar ALD-573 or it's techno commercially equivalent).

S&F 5-6 mm thick bevelled edges high quality looking mirror, fancy type framed fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

M&L for 75mm Cast iron nahani trap with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1, using 20mm graded stone aggregate complete all as specified and as directed.

M&L 100mm Cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete cement concrete 1:2:4, type B1, using 20mm graded stone aggregate complete all as specified and as directed.

M&L for 18-20 mm thick Black granite stone laid over and including 15 mm thick cement sand screed in CM 1:4 as in cooking platforms, slabs for oval type WHB, sinks/cills etc., & the likes including mirror polishing complete & providing necessary holes for gas pipe complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar situations complete all as specified and as directed

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including fixing arrangement for inlet/outlet/overflow & vent pipe of standard size including taking out old PVC/RCC water tank & removing away from site complete all as specified and as directed

All as in item No 25 hereinbefore but for 1000 ltrs capacity

M&L for cleaning of water tanks of capacity exceeding 250 ltr but not exceeding 500 and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., complete all as specified and as directed

All as in item No 27 hereinbefore but for capacity exceeding 500 ltr but not exceeding 1000 ltr

M&L for Disconnecting existing tanks of capacity exceeding 250 ltr but not exceeding 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. (Cleaning repairing, etc., measured separately)

All as in item No 29 hereinbefore but for capacity exceeding 500 ltr but not exceeding 1000 ltr

S&F as in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms) complete all as specified and as directed

Taking down cement plaster/wall tile on stone masonry, RCC surfaces, dado surfaces etc., complete including racking out joints, hacking for key scrubbing down with water complete all as specified and as directed

M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in CM 1:4 mixed with integral water proofing liquid as per manufacturers instructions over stone masonry surfaces and finished fair and even without using extra cement complete all as specified and as directed. Note:- cost of Integral water proofing liquid shall be measured and paid separately.

M&L for 10 mm thick rendering in CM 1:4, over concrete surfaces, finished even and smooth as in ceilings complete all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old or new plastered wall surfaces and applying two coats of plastic emulsion paint over two coats of wall care putty to remove all depressions etc., including sandpapering the surfaces & obtain a smooth surfaces complete all as specified and as directed.

M&L for preparation of old or new plastered/unplastered wall surfaces and applying two coats of weather coat paint over a coat of suitable primer complete all as specified and as directed.

M&L for complete removal of existing treatment on unplastered wall surfaces and applying two coats of weather coat paint over a coat of suitable primer complete all as specified and as directed.

Supply only integral water proofing compound ISI Marked complete all as specified and as directed.

M&L for mild steel framed work as in brackets, cooler stands, supporting frame work for sun shade, framed steps/stairs, using MS sections/angle iron steel bars, gusset plate etc., complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and as directed.

M&L for Keyed pointing in CM 1:3 to square rubble masonry Jodhpur type regular course complete all as specified and as directed..

Demolition of Cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness and removing debris and rubbish from site complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B1 using 20mm graded crushed stone aggregate as in coping to parapet walls as in roof kerbs rounded or chamfered on edges including necessary form work complete all as specified and as directed.

M&L for 50 mm thick cement concrete 1:3:6, type C1 using 20mm graded stone aggregate and finishing the surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B0, 12.5mm graded stone aggregate as in sub floors etc., including finishing the surface even rough to receive screed complete all as specified and directed.

M&L for glazed colour ceramic tiles of size 300x450x7mm, laid in vertical surface dado/skirting joint free etc., set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over 10 mm thick rendering in CM 1:3 over stone masonry surfaces & finished even & rough to receive tiles complete all as specified and directed.

M&L for non skid cloured ceramic tiles 7 to 8mm thick (Square/ Rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 with or without using space in floors etc., complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 with or without using spacer as in floors etc. complete all as specified and directed.

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work with cement mortar 1:6 also facing, jointing and pointing to match existing work, complete all as specified and directed.

Dismantling 100/110mm dia Cast iron/PVC soil waste & vent pipes including all fittings etc., complete all as specified and directed.

Dismantling 75 mm dia Cast iron/PVC soil waste & vent pipes including all fittings etc., complete all as specified and directed.

S&F 75mm dia Cast iron spun cast iron waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia Cast iron spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed.

S&F 100mm dia Cast iron spun cast iron waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm dia Cast iron spun cast iron pipe jointed with cement joint and fixed to walls including cutting of holes wherever required complete all as specified and directed..

S&F 100mm dia Cast iron bends including cutting of holes complete all as specified and directed.

S&F 100mm dia Cast iron connector of length 30cms including cutting of holes with lead joints complete all as specified and directed.

S&F 100mm dia Cast iron single branch piece complete all as specified and directed..

S&F 100mm dia Cast iron double branch piece complete all as specified and directed.

S&F 75mm dia Cast iron bends including cutting of holes complete all as specified and directed.

S&F 75mm dia Cast iron single branch piece complete all as specified and directed.

S&F 75mm Cast iron double branch piece complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm & removal to store complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area exceeding 1.50Sqm but not exceeding 4.0Sqm and removal to store complete all as specified and directed.

Taking down shutter of any description exceeding 1.00Sqm but not exceeding 2.00Sqm and removal to store complete all as specified and directed.

Taking down shutter of any description exceeding 1.00Sqm but not exceeding 2.00Sqm and refixing in the same opening after necessary repair like easing etc., complete all as specified and directed.

S&F Mild steel work as in doors frames using MS angle/Tee iron confirming to Fe-410-W(Gde-E-250) Quality A complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

M&L for 3mm thick, plain sheet glass ordinary quality in squares not exceeding 0.50 Sqm and glazing with oil putty or with wooden beads (supplied along with shutters) complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for providing factory made 30mm thick Solid decorative WPC (Wood polymer Composite) flush door shutter 100% solid plain board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powders/rice husk/wheat husk) and Non toxic additives, made from extrusion process WPC foam sheet single extruded (Inner) with density not less than 650 kg/cbm, having good screw holding capacity (Screw Withdrawal strength of 2000 N(Face) & 1100 N(Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with property of being termite/ borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed. Note:- Material test certificate and authentication should be obtained from the manufacturing company.

S&F factory made 100% Solid WPC (Wood Polymer Composite) Door Frame of size 100mm x 50mm single rebated, made from Wood Polymer Composite (Single extruded process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity (Screw withdrawal strength of (Min. 990 N), minimum compressive strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/moisture proof & fire retardant & fixed in position with SS dash fasteners /hold fast of required dia and length complete all as per specifications drawings complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company (Hold Fast or Dash Fasteners shall be paid separately )

S&F 150mm size anodised aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100mm size cold rolled mild steel butt hinges, medium weight, and fixed complete all as specified and directed.

S&F 100mm size stainless steel butt hinges medium weight fixed with steel nut & blots in PVC door frames & PVC shutters complete all as specified and directed.

S&F 140mm floor door stopper body and tongue with hard drawn steel spring, 140mm overall length of cover plate complete all as specified and directed.

S&F 150mm size anodised aluminium handles, D type with plate complete all as specified and directed.

M&L for preparation of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-charge.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling Jodhpur type regular coursed well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified & directed by Engineer-in-charge.

All as per item No 90 hereinbefore but except stone complete all as specified and directed

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exceeding 20mm and dressing complete all as specified & directed by Engineer-in-charge.

M&L 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones, templates etc., not exceeding 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.

M&L for Cutting chases exceeding 10cm but not exceeding 20cm in stone walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or sunshades, shelves, lintels, etc.

M&L for precast cement concrete block masonry exceeding 10cm width with solid block of CC 1:2:4, type B1 using 20mm graded stone aggregate set in cement mortar 1:6 complete

M&L for precast cement concrete block masonry not exceeding 10cm width with solid block of CC 1:2:4, type B1 using 20mm graded stone aggregate set in cement mortar 1:6 complete

Taking down existing old Tarfelt from RCC roof, stone roof in any thickness etc., carefully including cleaning the roof surface by wire/coir brush and removing all grits, stones, fungus, moss and finally washing down with water to the entire satisfaction of Engr-in-Charge.

M&L for roof treatment in the following stages:- (a) First Course: M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacture instructions (Note:- WPC shall be measured and paid separately) (b) Second Course: One coat of bitumen primer T-10/polymerised confirming to IS:3384 @ 0.30 ltr/Sqm (c) Third Course: One coat of Binding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course: A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 3 mm having weigh 3.00Kg/Sqm (e) Fifth Course: A coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course: 40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggregate with grooves shall not be exceeding 1.40 Sqm and joint shall be filled with bitumen

Complete removal of foliage/vegetation growth on buildings and in over non accessible roof, chajjas, wall and similar surfaces etc., and making good the surfaces, area of each job not exceeding 1.00 Sqm, including disposal of debris to a distance not exceeding 50m of area complete all as specified and as directed. (Note: Appx height of Bldg is 7.00 mtrs)

M&L for PCC 1;5:10, type E2, using 40 mm graded crushed stone aggregate as in mass concrete in sunken portion of nahani/ floor traps after carrying out satisfactory testing of CI pipes/ PVC pipe joints and slab/walls by filling water for 72 hours and pipe joints shall be embedded in PCC 1:3:6 type C1 using 20mm graded stone aggregate complete all as specified and as directed.

S&F sensor based urinal with all fittings and fixtures complete all as specified and as directed.

S&F 12mm thick toughened glass fixed with stainless steel channel, hinges fixed with screws as partition two urinal etc fixed with suitable locking arrangement as per direction of Engr-in-Charge.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switches, sockets, aluminium conductor cable with and including wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully unserviceable main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

Taking down carefully unserviceable sub main wiring of any size and all as directed.

M&L for Point wiring for Modular fittings (Concealed) using approved colour coding as per IS Red/Yellow/Blue, Black and green for single phase circuits) with multi stranded copper conductor 1.5 Sqmm nominal cross area single core PVC insulated and unsheathed FR LS cable 1100 Volts grade ISI 694 marked with valid CML No. in and including medium grade PVC concealed conduit of dia not less than 20mm and conduit accessories ISI marked with valid CML No. (IS 9537 -1983) for wall/roof /floor etc with pressed flush metal boxes modular covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets including PVC insulated multi stranded copper conductor FRLS 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following:-

One light point controlled by one, one way switch

One fan/ Exhaust Fan point controlled by one way switch.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per item no. 107 here-in-before but with 2.5 sqmm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent 15 Amp point complete all as per directed by Engr-in-Charge

S&F Modular switch flush type single pole one way 6 Amp ISI Marked complete all as per directed by Engr-in-Charge

S&F Modular switch flush type single pole one way 16 Amp ISI Marked complete all as per directed by Engr-in-Charge

S&F Modular socket outlet 2 in 1, 5 pin, 6 Amp, 230 Volts flush type complete all as per directed by Engr-in-Charge

S&F Modular socket outlet 2 in 1, 6 pin, 5 and 16 amp flush type, 230 Volts ISI Marked complete all as per directed by Engr-in-Charge

S&F Modular Lamp holder, metal cased, bakelite body, 230 volts, ISI marked complete all as per directed by Engr-in-Charge

S&F LED Warm lamp 9W ISI Marked complete all as per directed by Engr-in-Charge

S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as per directed by Engr-in-Charge

S&F LED Warm White lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including, copper conductor cable of suitable size from ceiling rose complete , 4 ft long complete all as per directed by Engr-in-Charge

S&F LED Warm White light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge

Taking down unserviceable exhaust fan of any make, type and sweep by disconnecting electric connection and depositing in MES store yard complete all as per direction of Engr-in-Charge.

S&F PVC Exhaust fan 300mm sweep, 1000 RPM, including louvers with cutting chases on brick wall and grouting with nut bolts/fasteners complete all as per directed by Engr-in-Charge

S&F MCB, B Curve type, 10 kA, 63Amp, SPN with over load and short circuit protection, complete all as directed.

S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

S&F MCB DB, SPN, (double door), 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed by the Engr-in-Charge.

M&L for sub main wiring with 2 run of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size including all conduit accessories & fittings / junction boxes / inspection covers etc, with and including cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable including one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

S&F Sheet metal enclosure, SPN with a two pin earth plug and socket with metal clad top and one MCB,SP, 20Amps capacity complete all as directed by Engr-in-Charge.

M/S KAUTILYA GARG

M/s Ajay kumar Garge