ADDN/ALTN OF CERTAIN OFFRS, JCOs AND ORs MD ACCN IN BIRPUR AND GHANGHORA AT DEHRADUN

Amount

SCHEDULE 'A' PART- I (B/R WORK )

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified & directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out, in soft/loose soil complete all as specified & directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out soft/loose soil and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified & directed

Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified & directed.

Removing excavated materials n.exc 50mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base, foundation and mass concrete etc. complete all as specified & directed

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. complete all as specified & directed

M&L for brick work in half brick thick wall with sub class 'B' bricks old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:4 complete all as specified & directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius, built in cement mortar 1:6 complete all as specified & directed

Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:6, finished surfaces even and fair complete all as specified & directed.

M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in cement mortar 1:6, finished surfaces even and fair complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:4, finished surfaces even and fair complete all as specified & directed.

M&L for preparation newly plastered or unplastered surfaces of walls & applying two coats of cement base paint over a coat of cement primer complete all as specified & directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer complete all as specified & directed

M&L for preparation of newly plastered surface of walls and applying two coat of first quality exterior acrylic emulsion paint (weather coat) over a coat of alkali priming paint complete all as specified & directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.

M&L for applying two or more coat of cement based Wall Care Putty of make JK / Birla / Johnson & Nicholson on old/new plastered surfaces of walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M&L for applying two coat of plastic emulsion paint over one coat of primer including coat of wall care putty new plastered surfaces of walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces complete all as specified and as directed.

M&L for cement concrete 1:2:4, type B1 (20 mm graded stone aggregate) as in copings , benching, bed plates etc. including all necessary formwork, complete all as specified & directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified & directed

M&L for 75mm thick PCC 1:3:6 type C-1, (20 mm graded stone aggregate)as plinth protection finishing even and smooth without using extra cement including making joints & filled with mix of bitumen and sand in ratio 1:3 between panels and corners, complete all as specified and directed

M&L for hard core broken stone or boulders of gauge n.exc. 63mm deposited spread and level in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified & directed

M&L for cement concrete type B2, 1:2:4 (40mm graded aggregates) as in foundation filling and mass concrete complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4, type B-0 (12.5mm graded stone aggregate) as in sub base of floors to receive top floor finishes complete all as specified & directed.

Dismantling of timber scantling 40 sqcm and over in section as in framed work in any position complete all as specified & directed

Dismantling of timber scantling under 40 sqcm and in section as in framed wk in fillet rails, posts, rafters etc complete all as specified & directed

M&L for second class hard wood (Sal), clean sawn in scantling timber fixed complete all as specified & directed.

M&L for second class hard wood plain fillet square, rectangular or trangular clean sawn in section exc 13 and n.exc. 25 sqcm secured with nails or brads complete all as specified & directed

M&L for preparation of wooden surfaces new or old of any description or girth not otherwise described and two coat of creosote oil complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified & directed

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified & directed

S&F mild steel, plain black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified & directed

S&F plates girders or single stainchions , built up of one beams or channel , section with flange plates, caps, bases , splices , angles brackets , clits and other connections. Fe-410-W (Gde E- 250) quality `B` complete all as specified & directed.

S&F mild steel secrews bolts (machine made ) dia of neck 11 to 15mm with hexagonal or sequre head at one end and screws other or screwed bot ends each screwed and to be fitted with washer and one hexagonal or square exc 5 cm but n.exc 10cm long, complete all as specified & directed.

M&L preparing new steel or iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

M&L preparation of new steel or iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for 20mm thick Granite stone (of any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in single piece including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite stone fixed over & including 20 mm thick bedding screed in cement mortar 1:4 complete all as specified & directed

Rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situations complete all as specified & directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified & directed.

S&F for pre-painted Galvalume Aluminium Zinc Coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensilre strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F for pre-painted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling wall and ceiling boards, fibre or pulp, insulation etc. in insulation boards slabs, blankets any thickness incl cover fillets complete all as specified & directed.

S&F solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified & directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified & directed.

Supply & fixing false ceiling of designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights complete all as specified & directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified & directed

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified & directed

M&L 10 mm thick rendering or bedding layer in cement mortar 1:4 to receive wall tiles/vertical surfaces finishes complete all as specified & directed

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Glazed Ceramic Tiles, Coloured, 450X 300X 7 to 8mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for light colour, double charged vitrified ceramic tiles 10 mm thick ( square or rectangular) polished area of each tiles exc n.exc 0.36 Sqm in floors and skirting etc., set and jointed in neat cement slurry and pointed in white or color cement to match, complete all as specified & directed

M&L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in floors/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition stone slabs/tiles of any description of thickness in floor aprons etc. laid and pointted in cement mortar complete all as specified & directed

M&L pre-polished machine cut, kota stone slab flooring 20-25mm thick set & jointed with grey cement slury over & including 20mm thick bedding layer/screed in cement mortar 1:4 after laid rubbing and polishing mirror finish, complete all as specified & directed

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each including taking out of holdfast & making good in CM (1:4)complete all as specified & directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each including taking out of holdfast & making good in CM (1:4) complete all as specified & directed.

Taking down shutters of any description exc. 1 sqm and n. exc 2 sqm each complete all as specified & directed

Taking down and rerfixing in same opening of shutters of any description exc. 1 sqm and n. exc 2 sqm each complete all as specified & directed

S&F for FRP door frame 100mmx50mm made out of 3mm coloured Prelaminated FRP sheet with UV grade polyester Resin complete all as specified & directed.

S&F for 30mm thick FRP door shutters with UV Grade polyester Resin with minimum 3 mm thick coloured prelaminated FRP sheet fixed on both sided, complete all as specified & directed.

S&F for Ist class hard wood (shesam) small fittings such as brackets of any type, door stoppers and like including all necessary labours, articles n exc 200 cucm each complete all as specified & directed.

S&F factory made pressed steel door frames fabricated with 1.25mm thick sheet of size105 x 60mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plates etc. complete all as specified & directed.

S&F factory made pressed steel door frames, fabricated with 1.25mm thick sheet of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plates etc.complete all as specified & directed.

S&F 40 mm thick factory made flush shutter solid core construction, with block board core and ply wood face pannels commercial type on both sides complete all as specified & directed.

S&F for 0.90 mm decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified & directed

M&L for cement concrete 1:3:6, type C-0 (using 12.5mm graded stone aggregate) as in bed plates, filling in pressed steel door frames etc. including all necessary formwork etc. complete all as specified & directed

S&F factory made 35mm thick second class hard wood gauzed and skelton door shutter open rebated and prepared to recive glass , gauze etc. without sash bar edges of framing plain chamfered or rounded fitted with cut and mitred beds for securing glass etc. size of members of shutters as specified in clause 8.24 (a) of SSR Pt-I (2009), kiln seasoned and chemically pressure treated conforming to IS-1003 Pt-I including one coat of primer, complete all as specified & directed

S&F factory made 35mm thick 2nd class hard wood plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including one coat of primer, complete all as specified & directed

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed

S&F for powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. (Note- Actual weight of aluminium section will be ascertained by BOO ordered by GE)

S&F for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised, alumin tower bolt, aluminium snap beading screws etc. complete all as specified & directed

S&F for powder coated, Anodised aluminium window & ventilator shutters side hung type without sash bars, aluminium sections weighting 0.55 Kg/ m includng necessary jointing cleats, glazing cloiups, rubber packing, anodised aluminium fittings such as peg stays 150 mm long (1 nos), hinges type B21, 100 mm long (2 nos) suitable handle (1 no) tower bolt including heavy deco grill complete all as specified & directed

S&F butt hinges medium weight cold rolled mild steel, size 100 mm complete all as specified & directed.

Supply only butt hinges medium weight cold rolled mild steel, size 100 mm complete all as specified & directed.

S&F butt hinges medium weight cold rolled mild steel, size 50 mm complete all as specified & directed.

S & F floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140 mm and fixed to door shutters complete all as specified & directed.

S&F for aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified & directed.

S&F for aluminium handles cast type anodised 150mm long complete all as specified & directed.

S&F for aluminum alloy anodised sliding door bolts 250mm long with hasp staple bolt type and fixing clips of seat cast or extruded section or cast aluminum alloy and fixed complete all as specified & directed .

M&L bands, straps, including bolts, if required hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins; knee piece inserts; similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified & directed

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified & directed.

M&L for form work to soffits and sides of suspended slab, shelves and chajja etc. fair finished surface of concrete flat, complete all as specified & directed.

M & L for Reinforced Cement Concrete (Nominal Mix) 1:2:4 type B1 (using 20 mm graded stone aggregate) as in shelves,slab , chajjas etc. and similar work, complete all as specified & directed

M&L for Reinforced cement concrete (Nominal mix) 1:2:4 type B1 (20 mm graded agg) beam cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified & directed

S&Fmild steel TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified & directed .

S&F mild steel TMT bars 6mm to 8 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified & directed.

S&F for Kitchen plate rack made of stainless steel 1 mm thick with shelves, overall size 900mm x 750mm, fixed to wall complete all as specified & directed.

S&F stainless steel sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F stainless steel decorative curtain rod of 20 mm dia thickness 1 mm with and including brackets 02 nos & finalie 02 nos and 8 rings per RM. complete all as specified and as directed

S&F pre-coated (powder coating) steel windows with side hung shutters (Box Type) with double shutter (glazed & gauzed shutters) with frame complete all as specified and shown on TD -158 sheet 1/2 & 2/2 & directed. (Note:- Measurement shall be taken completely for glazed & gauzed with frame but grill will be measured separately under respective item)

S&F steel ventilator with top/side hung shutter including hinges, steel peg stay, complete complete all as specified & directed

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty / pins /spring pins and wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified.

M&L for 4mm thick sheet glass tinted, ordinary quality and glazing with oil putty / pins /spring pins and wooden beads in square exceeding 0.5 Sqm in each pane complete all as specified.

M&L for 5.5mm thick sheet glass tinted, ordinary quality and glazing with oil putty / pins /spring pins and wooden beads in square exceeding 0.5 Sqm in each pane complete all as specified.

M&L for 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified & directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified & directed.

S & F 18mm thick plywood coated with fibre reinforced plastic(FRP) 3mm laminated on both faces (3mm +12mm +3mm) and edges to be sealed with PVC edges binding tape for cupboard shelf and shutter complete as per specifications complete all as specified & directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized, width of flap 30 mm complete all as specified & directed.

S&F 150 mm size hasp and staple, safety type, aluminum anodised with mild steel hinge pin including bolt to hinge plateand fixed with screws complete all as specified & directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished, bright finished complete all as specified & directed.

S & F brass chromium plated rod tubular 20mm dia for Cup Boards complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), triple layer white colour, capacity 1000 ltrs, hoisted and fixed in position all as specified in SSR Part I including dismantling of old unserviceable water tank complete all as specified & directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer white colour, capacity 1000 ltrs, hoisted and fixed in position all as specified in SSR Part I including dimantling of old unserviceable water tank complete all as specified & directed.

S&F 20mm stop valve, cast copper alloy, butterfly handle, screwed down, high pressure, screwed for iron pipe or brass ferrule and fixed complete all as specified & directed

Taking down steel tubing and connections, incl cleaning for refixing or removal to store, 15mm bore of pipe complete all as specified & directed

Taking down steel tubing and connections, incl cleaning for refixing or removal to store, 20mm bore of pipe complete all as specified & directed

Cutting chases in brick/stone walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 concealed water tubing etc. and making good, cutting not exceeding 10cm girth complete, all as specified and directed.

S&F galvanized iron pipes 15mm bore, medium grade, with fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified & directed

S&F galvanized iron pipes 20mm bore medium grade with fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified & directed

S&F 20mm dia ball valve high pressure PTMT with epoxy coated aluminium rod & high pressure plastic ball screwed for iron pipe and fixed complete all as specified & directed

S&F 20 mm dia gun metal gate or globe valves, with iron wheel head screwed both ends complete all as specified and directed complete all as specified & directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x400mm, including brackets, CP washers coupling & waste pipe complete all as specified and directed

Supply and fix 15mm dia pillar taps, cast copper alloy, chromium plated, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipes and fixed complete all as specified and directed.

S&F Viterous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern, flush pipe complete all as specified & directed.

S &F in repairs vitreous china water closet Squatting Orissa pattern white size 580 mm x 440 mm, white, with 'P' or 'S' trap, front or back inlet, integral foot rest with provision of PCC 1:2:4, type B-1 using 20 mm graded crushed stone aggregate, (excluding flushing cistern annd flush pipe) etc. and making good to floors in repairs, complete all as specified & directed.

S&F sand cast iron 'P' or S trap 100mm bore for any type water closet complete all as specified & directed.

S&F in repair, low level 10 ltrs capacity PVC valve less symphonic action type flushing cistern incl flush pipe fixed with inlet ball valve, float and handle, including brackets, complete all as specified & directed.

S&F in repairs to Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F stop valves/angle valve 15mm bore concealed type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repairs 15mm bore brass CP wall mixture for bath with hot & cold water screwed down for iron pipe and fixed complete all as specified & directed.

S&F 15mm bore brass CP mixture for wash basin and kitchen sink with hot & cold water screwed down for iron pipe and fixed complete all as specified & directed

S&F in repairs 15mm bore brass CP mixture fo rkitchen sink with hot & cold water screwed down for iron pipe and fixed complete all as specified & directed

S&F in repairs Brass chromium plated shower rose, 125mm size, complete all as specified & directed

Supply & fixed 5.5 mm thick sheet glass shelf assembly 12cm wide consisted chromium plated bracket guard & railing 60cm long fixed with screws complete all as specified

Supply & fixed 8 mm thick sheet glass shelf corner (300x300mm size) assembly consisted chromium plated bracket guard & railing fixed with CP screws complete all as specified

S&F 15mm size PVC connection with PTMT nuts length 450mm long complete all as specified & directed

S&F brass chromium plated towel rail 20mm dia D type 60cm long between flanges of brass chromium plated complete all as specified & directed

S&F cast iron Nahani trap 75mm dia outlet with CP grating including jointing to waste pipe in cement mortar, complete all as specified & directed

S&F in repairs PVC (SWR) pipes 75mm bore, single socketed in any length with rubber ring joints fixed to walls with clamps and PVC saddles etc., complete all as specified & directed

S&F in repairs PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls with clamps and PVC saddles etc., complete all as specified & directed

S&F PVC (SWR) bends of any radius bore of pipe 75 mm complete all as specified & directed

S&F PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified & directed

S&F PVC (SWR) single T of any radius with access door bore of pipe 75 mm complete all as specified & directed

S&F PVC (SWR) bends,of any radius bore of pipe 110 mm complete all as specified & directed

S&F PVC (SWR) bends,of any radius with access door bore of pipe 110 mm complete all as specified & directed

S&F PVC (SWR) single T of any radius with access door bore of pipe 110 mm complete all as specified & directed

S&F CP Gratings 100 mm dia complete all as specified & directed

M&L for post control ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed

M&L for post control ATT treatment of soil under existing floors using emulsion @ one litre pe hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed

S &F for Stainless Steel (AISI 304 grade) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container of with the following in each kitchen :- (a) Plain basket of size 510x470x100 or 520x485x100 mm -01Nos (b) multi size plate basket of size 510x470x150 or 520x485x150 mm -01 Nos (c) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100 or 520x485x100 mm -01 Nos (d) Plain basket of size 510x470x200 or 520x485x200 mm -01Nos (e) Pull out with 02 Nos baskets each of size 150x485x80 or 100x485x80 mm -01 Nos (f) Including frame work , telescopic channels , handles etc as required & all as specified sample & design to be approved by GE. (Make: Hettich/Hafole)

M&L Reinforced cement concrete pipes 150 mm bore, Class NP2, laid and jointed with collars in cement mortar 1:1 and tested, complete all as specified & directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in bed of drain pipes concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 150mm dia complete all as specified & directed.

M&L for PCC 1:3:6 Type C-2 (using 40mm graded stone agg) as in foundation filling and mass concrete as in bed of manholes etc complete all as specified & directed.

M&L for brick work with sub class `B’ old size bricks straight or curved on plan exc 6m mean radius in cement mortar 1:4, complete all as specified & directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in surface channel bed/drains/in manholes all as specified laid to slope and finished surface even and smooth complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick workor concrete surfaces (inside MH) in cement mortar 1:4 using water proofing compound @ 2% by wt of cement including finishing the surface even and smooth without using extra cement complete all as specified & directed. (Note- WPC shall be measured & paid separately)

Supply only integral water proofing compound complete all as specified & directed.

M&L for pre-cast RCC 1:2:4 type B-1 (using 20mm grade stone aggregate) cover slabs for manholes, set in cement mortar 1:6 complete all as specified & directed. ( Note-Reinforcement shall be measured & paid separately)

S&F 12 mm dia round bars as in handles of manholes, cut to length bent to shape required including cranking bending spirally for hooping, complete all as specified & directed

M&L for construction of Soakage well 2.40 M dia and 3.00 M effective depth, excavation in any type of soil, foundation in PCC 1:3:6 type C-1, brick masonary wall and honey combed brick masonry in cement mortar 1:4 with top ring of RCC M-25 nomonal mix concrete, RCC M-25 nomonal mix concrete cover slab, inter connecting pipes of RCC, filled with brick bats of size/gauge, complete all as specified and shown in relevant TD, complete all as specified & directed.

M&L for construction of Septic tank for 50 users, excavation in any type of soil, PCC 1:4:8 in foundation base bed, brick walls in cement mortar 1:4, 15mm thick plaster in cement mortar 1:4 internally and 15mm thick plaster in cement mortar 1:6 externally upto 150mm below ground level, RCC M-25 nominal mix cement concrete in slab, RCC M-25 nominal mix concrete baffle walls, including vent shaft , manhole openings with cover and connection etc., complete all as specified and shown in TD-217, sheet 1/2 & 2/2.

Excavation over areas n.exc 1.5 mtr deep and getting out in soft / loose soil complete all as specified & directed.

Removing excavated materials soil exc 250m but n.exc. 500mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise a specifically provided for complete all as specified & directed,

M&L for 75 mm thick cement concrete type C-1, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified & directed.

M&L for pre-polished chequered cement concrete, coloured tiles glossy finish of size 300mm x 300mm x 25mm thick set, jointed and pointed in neat cement slurry with white cement & pigment to match laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for cement concrete type C2, 1:3:6 (40mm graded aggregates) in surface channel and drains etc. complete all as specified & directed

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms , moulds mitred / stoped ends etc. complete all as specified & directed

Surface dressing n.exc 15 cm deep averaging in any type of soil complete all as specified & directed.

SCHEDULE 'A' PART-II (E/M SERVICES) (NOTE:-EARTH WORK REQUIRED SHALL BE MEASURED UNDER SRL ITEM No.2 & 3 ABOVE)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, lamp holder, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring (concealed) complete using approved colour coding as per IS (Red, Black, Green for single phase circuit) with multi-stranded copper conductor 1.5 Sqmm nominal cross section area, single core PVC insulated unsheathed FRLS-H cable 1100 volts grade, IS-694 marked with valid CM/L No. in and including PVC conduit medium grade conduit accessories such as bend, tee, junction boxes elbows etc, ISI marked with valid CM/L No. (IS :9537 -1983 for conduit and IS :9537 -1976 for conduit accessories) including pressed steel terminal sunken boxes 1.6 mm thickness, 65mm deep with earth dolly, duly painted with two coats of black bitumenous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and PVC unsheathed copper conductor 1.5 Sqmm cross sectional area, single core FRLS-H cable as earth continuity wire connected to DBs/sunken boxes/fittings conductor and all other metal parts with earth dolly, including cutting chasses and making good the surfaces in cement mortar 1:3, complete all as specified and directed for the following:- (Note:- Under this item points shall be made against old taking down points under item No.166)

One light point / bell buzzer point controlled by 01 no. one way switch.

One ceiling fan / exhaust fan point controlled by 01 no. one way switch through regulator.

One 3 pin 5 amps socket outlet point on independent board.

One 3 pin 5 amps socket outlet point on same board.

M&L for new point wiring (concealed) complete using approved colour coding as per IS (Red, Black, Green for single phase circuit) with multi-stranded copper conductor 1.5 Sqmm nominal cross section area, single core PVC insulated unsheathed FRLS-H cable 1100 volts grade, IS-694 marked with valid CM/L No. in and including PVC conduit medium grade conduit accessories such as bend, tee, junction boxes elbows etc, ISI marked with valid CM/L No. (IS :9537 -1983 for conduit and IS :9537 -1976 for conduit accessories) including pressed steel terminal sunken boxes 1.6 mm thickness, 65mm deep with earth dolly, duly painted with two coats of black bitumenous paint over a coat of red oxide primer externally, covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with brass screws, cup washers and PVC unsheathed copper conductor 1.5 Sqmm cross sectional area, single core FRLS-H cable as earth continuity wire connected to DBs/sunken boxes/fittings conductor and all other metal parts with earth dolly, including cutting chasses and making good the surfaces in cement mortar 1:3, complete all as specified and directed for the following:- (Note:- Under this item additional new points shall be made)

One light point / bell buzzer point controlled by 01 no. one way switch.

One ceiling fan / exhaust fan point controlled by 01 no. one way switch through regulator.

One 3 pin 5 amps socket on same board with other switches.

One 3 pin 5 amps socket on independent board.

All as per item No 167 above, but one 3 pin socket outlet 15 Amp on independent board with cable 2.5 Sqmm size, with earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

All as per item No 172 above, but one 3 pin socket outlet 15 Amp on independent board with cable 2.5 Sqmm size, with earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

S&F switch piano, flush button type, 5 Amp SP 240 V AC complete all as specified and directed.

S&F switch piano, flush button type, 15 Amp SP 240 V AC complete all as specified and directed.

S&F socket outlet multipurpose, 3 pin 5 Amp and 2 pin 5 Amps 240 V AC complete all as specified and directed.

S&F socket outlet two in one, 3 pin, 5 Amp and 15 Amp 2 module 240 volts, flush type complete all as specified and directed.

S&F bell push button type, 5 Amps complete all as specified and directed.

S&F ding dong bell, AC 230 V, Single pole complete all as specified and directed.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings, 240 V AC complete all as specified and directed.

S & F ceiling rose, 3 phase / PVC / polycarbonate, isolated body, 250 V AC complete all as specified and directed.

M&L in replacement sub main wiring with 2 single core PVC insulated unsheathed FRLS-H cable 1100 volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 20 mm dia or higher PVC conduit medium duty concealed conduit heavy duty accessories and fittings cutting and insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sqmm as earth wire upto common earth and connected to earth including taking down old sub main wiring duly complete all as specified and directed.

M&L sub main wiring with 2 single core PVC insulated unsheathed FRLS-H cable 1100 volts grade heavy duty copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 20 mm dia or higher PVC conduit medium duty concealed conduit heavy duty accessories and fittings cutting and insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sqmm as earth wire upto common earth and connected to earth complete all as specified and directed.

S & F in replacement sheet metal enclosures 240 Volt with 200 Amp rated copper bus bar for double door 8 way IP-43 DBs IK-09 suitable for one MCB SPN as incoming and 6 MCB SP as outgoing mounting flush on wall and making good disturbed surfaces including taking down old DBs complete all as specified and directed. (MCB's shall be measured and paid separately)

S&F sheet metal enclosures 240 Volt with 200 Amp rated copper bus bar for double door 8 way IP-43 DBs IK-09 suitable for 01 SPN MCB as incoming and 6 MCB SP as outgoing mounting flush on wall and making good disturbed surfaces complete all as specified and directed. (MCB's shall be measured and paid separately)

S&F in replacement and testing TP&N vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DBs IK-09 flush mounted with 250 Amp copper bus bar for each phase with two neutral bar & two earthbar and cable lies for cable management for provision of MCCB 63 Amps ICs= 100% ICu, 16 KA four pole as incomer including connecting terminal strip complete and SP MCBs as outgoing complete pre-wired with suitable size copper conductor including taking out old unservicable DB and removing from site and making good of disturbed surface complete all as speciifed and directed. Note:- (i) MCCB / MCBs shall be measured and paid seperately. (ii) VTPN DB/MCCBs/MCBs shall be of same make.

S&F MCB, double pole, 240 Volt, 10 KA, 40 Amp, 'B' series confirming to ISI marked complete all as specified and directed.

S&F MCB, single pole, 240 Volt, 10 KA, 32 Amp, 'B' series confirming to ISI marked complete all as specified and directed.

S&F MCCB, 415 Volt, 16 KA, 4 pole, 63 Amp, magnetic trip release and setting as incoming with fixing arrangement complete all as specified and directed.

S&F in replacement wall mounted LED tube light fitting 1 x 20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140 V - 270 V color temp 6500K & lumen input output 95 lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall / roof including taking down old tube light fitting complete all as specified and directed. Make :- Philips cat part No TMC 1001XT LED 13-20 WWH (Tube Batten) and MAS LED 1200mm 18W-865 T-81 (tube) / Wipro Cat Part No WI0921208 (Tube Batten) LL13-181-650(Tube)/Havells Cat Part No. CP REGAL BATTEN 8 UPTO 1X20WSSBSWH (Tube Batten), PHOTON ULTRA E201213T11W LED865SPC.

S&F wall mounted LED tube light fitting 1 x 20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140 V - 270 V color temp 6500K & lumen input output 95 lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall / roof including taking down old tube light fitting complete all as specified and directed. Make :- Philips cat part No TMC 1001XT LED 13-20 WWH (Tube Batten) and MAS LED 1200mm 18W-865 T-81 (tube) / Wipro Cat Part No WI0921208 (Tube Batten) LL13-181-650(Tube)/Havells Cat Part No. CP REGAL BATTEN 8 UPTO 1X20WSSBSWH (Tube Batten), PHOTON ULTRA E201213T11W LED865SPC.

S&F LED light 1 x 10 Watt bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as speciifed and directed. Make :- PHILIPS CP No.BN021LED12S6500PSUGR /Havells CP No.LHESABPTIN 1W0099W/C&S CP No.3LTARA/10W.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size Make : Philips CP No.BN021LED12S 6500 PSU GR/Havells CP No. LHESABP7IN1W009 9W/ Wipro CP No. MAGMA LED 10 Watt

S&F LED light fitting decorative wall mounting cast aluminium Polycarbonate paint bracket suitable for 5 watts LED bulbwith frosted glass with and including one no 5 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size Make:Havells Cat Part No: LHFOAJE1Io60 or equivalent in make specified hereinafter.

S&F high efficiency LED bulbs 1 X 12 watt that can be used as a ready replacement for existing GLS and CFL direct fit in holder complete all as specified and directed. Make:-PHILIPS model-Stellar Bright High wattage 15000 life Hrs/ Havells CP No.LHEAABPTIL 1W012/C&S CP No.CRONA-RNO 118W

S&F tamper proof electronic single phase whole currrent energy meter (LCD display) of 25 amps, 240 volt class 1.00 and AC supply including cable connection, proper sealing with bar code with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications off line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box . The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure I credit 350/L&T/BHEL

S&F tamper proof electronic three phase whole currrent energy meter (LCD display) of 10-60 Amps, 440 volt class 1.00 and AC supply including cable connection, proper sealing with bar code with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications off line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box . The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure I credit 350/L&T/BHEL

Taking down & Refixing ceiling fan any sweep single phase 230 volts with down rod , canopy, blades etc including painting of ceiling fan and connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan and writing MES No. on fan complete all as specified and directed.

Supply & fix ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc BEE 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan and writing MES No. on fan complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed

S&F Geyser vertical mount type 25 Ltrs capacity five star rated , shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall complete all as specified & directed .

S&F new air ventilation fan, metallic body, 300mm, 900 RPM with louvers, single phase, 230V AC including necessary fittings and M & L for making hole fixing arrangement on wall with frame holdfastener, bolt, washer, etc including connection with twisted cable from ceiling rose to connector complete all as specified and directed.

M&L earthing complete with using galvanised mild steel earth plate (electrode) 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 mtr depth below ground level with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15cm all round the plates using 4mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch / control board at another end. GI earth lead protected in and including 15mm dia GI medium grade pipe from upper end of earth plate upto equipment with & including 20mm dia bore GI pipe medium grade as water pipe from earth chamber to upper edge of the earth plate. GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1 (using 20mm graded stone aggreagte) as per electrical plate no-03 of SSR-part-II : 2010 and testing on completion all as specified and directed. Note:- (i) If the desired earth resistance is not found within permissible limit, item shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 Sqmm and 15mm dia pipe medium grade upto 7.5m is deemed to be included in the rate quoted for this item.

Supply and Fixing in replacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 25 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed. Make- Philips CP No. BRP-046 LED 30 CW MR S1 PSU GR (25 W 3000 lumens street light)/ Havells CP No. ENDURAPEARLSL25WLED7S7SASYTOPCMP/C&S CP NoINDUS/25W

Supply and Fixing in replacement Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed. Make- Philips CP No. BRP-056 LED 53 CW MR S1 PSU (45 W 5300 lumens street light )/ Havells CP No. ENDURAPEARLNEOS145WLED7S7PASYTOPC/C&S CP No.LTESS145WLED/LS

S&F LED decorative post top lantern for Garden light 40 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version as per Make- Philips CP No.BGP300 LED40 757 PSU PC IN S1/ CG Cat part No. LPTO40CDL/ Bajaj model No. BGCL 40WLED WH(CELESTA) .

Supplying, laying, jointing and testing LT underground cableof size 25 Sqmm 4 core, heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable size all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends, including taking up of old existing cable, all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items.

Supplying, laying in replacement, jointing and testing LT underground cableof size 50 Sqmm, 3.5 core, heavy duty, 1100 Volts, PVC insulated and sheathed, armoured with multi-stranded aluminium conductor cable conforming to latest IS , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly protected in galvanised steel pipe of suitable sizes all bare conductor of cable duly insulated 1.1 KV grade heat shrinkable sleeve including cable gland and lugging etc at both ends, including taking up of old existing cable, all complete all as specified and directed. Note : Excavation, earth work, cable sand cushioning & cable protection shall be measured separately under relevant items.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed. (Note- After filling 23 cm thickness of sand punned thickness 18 cm shall be measured for payment)

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

S&F 50mm bore galvanised mild steel tubing of medium grade with and incl all fittings laid in trenches complete all as specified and directed

S&F 25mm bore galvanised mild steel tubing of medium grade with and incl all fittings laid in trenches complete all as specified and directed

S&F gun metal globe or gate valves for 50mm nominal bore(Class-1) with iron wheel head ,srewed both ends for iron pipe ISI marked, complete all as specified and directed.

S&F gun metal globe or gate valves for 25mm nominal bore(Class-1) with iron wheel head ,srewed both ends for iron pipe ISI marked, complete all as specified and directed.

M&L for construction of brick masonry valve pit of following internally size 600mm x 600mm x 600mm with angle iron 25mm x 25mm x 4mm frame and 2mm thick mild steel plate cover painted with two coats of synthetic enameled paint over a coat of red oxide primer after preparation of surface including locking arrangement, including necessary excavation and earth work 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate over 100 mm thick hard core using broken in foundation/base floor, brick work in cement mortar (1:6) in one brick thick wall and 15mm thick cement plaster in cement mortar 1:4 on internal surface of walls and outside upto 150 mm deep below ground level complete all as specified and directed at site.

Note : Tenderers may note that amount of credit Rs 333680.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

RAMAPATI ENGINEERING SERVICES

M/s BK Enterprices

Ms Banco Builders