S.R. to Sub Division Office at Shahera Dist. Panchmahal

Name of Work :- S.R. to Sub Division Office at Shahera Dist. Panchmahal

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

1 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 0.46 Cum 3925.76

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

2 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.55 Cum 7127.29

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level.

3 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.49 Cum 6585.94

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level (For Chajja).

4 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 75.00 Kg. 76.21

including bending, binding and placing in position complete upto all floor level.

5 Providing & fixing 40 mm thick Single shutter flush door solid core finished with 17.43 Sq.m. 6935.97

both side 1 mm thick lamination both side like 'NOVAPAN 'or equivalent of

natural wood grain shade as approved by this office having telephone black

granite 18 mm thick frame with double stone as per the instruction of Engineer

in charge with necessary SS hinges and fixtures etc. complete.

6 Providing and fixing window having extruded aluminum colour anodized section 6.48 Sq.m. 4259.17

frame main outer size 95mm x 24mm x 1.17mm (@ Wt. 0.738 Kg/mt),

horizontal three track member size 92mm x 31.75mm x 1.30mm (@ Wt.

Kg/mt), vertical member of size 92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (@ Wt.

of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt. of

0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing including granite frame as per details etc. complete.

7 Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded in 697.55 Kg. 127.95

builtup for all type sections, in framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all complete as

per the structural designs and directions of Engineer in charge.Column ( 122 x

8 Providing and fixing M.S. grills of required pattern to wooden / Marble / Granite / 120.14 Kg. 159.58

Stone frames of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by screws

(A) Ornamental Grill.

9 Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' in flooring treads 223.70 Sq.m. 1484.61

of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand) finishing with flush pointing in white cement. Light shade floor

10 Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of steps 30.63 Sq.m. 1538.85

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and

jointed withwhite cement slurry (For Skirting & Riser)

11 Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24'' x 24'' in skirting, 1.76 Sq.m. 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry. (For Dedo)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

12 Providing and laying 18 mm thick machine cut, free edges, machine polished 3.03 Sq.m. 3325.93

Black Granite tread and risers in single piece with 1 cm nosing and necessary

grooves on treads etc. complete. (Marble for Step)

13 Providing 20mm thick sand faced cement plaster on walls upto height 10 8.37 Sq.m. 364.29

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

etc. complete.(Exterior Plaster)

14 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 12.60 Rmt. 41.00

15 Applying two coats of putty & two coats of primer of approved brand and 567.70 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

16 Applying two coats of putty & two coats of primer of approved brand and 188.16 Sq.m. 42.67

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth. (Ceiling Putty)

17 Wall painting two coats with plastic emulsion paint of approved brand and 567.70 Sq.m. 78.90

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth. (Interior wall paint)

18 Finishing wall with weather proof exterior emulsion paint on wall surface (two 327.54 Sq.m. 114.53

coats) to give an required shape even shade after thoroughly brushing surface

to remove all dirt, dust and remains of loose powdered materials etc. complete.

(Exterior Wall paint)

19 Wall painting (two coats) with plastic emulsion paint of approved brand and 188.16 Sq.m. 80.98

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.Extra over Item 17 for colour washing on

ceilings and/or sloping roofs. (Ceiling Paint)

20 Applying priming coat over new steel and other metel surface after and including 54.08 Sq.m. 129.36

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood, scrapers and sand paper

withready mixed priming paint brushing red lead.

21 Providing, laying and jointing in true line and level I.S.I. mark 25mm dia. U.P.V.C 8.00 Rmt. 91.84

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

22 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. U.P.V.C 12.00 Rmt. 72.65

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

23 Providing and fixing pillar tap, capstan head screw down high pressure with 2.00 No. 354.69

screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.

24 Providing and fixing chromium plated brass half turn flush cock of approved 2.00 No. 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by

Engineer in charge.

25 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 2.00 No. 420.63

26 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 1.00 No. 2280.27

including cutting holes in walls and making good the same but excluding fittings.

(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

27 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain- 100mm diameter 3.00 No. 558.36

with jail of the following nominal diameter of self cleansing design with C.I.

screwed down of hinged grating including the cost of cutting and making good

the walls. (i) 100mm dia.

28 Providing and laying sandwich type kitchen platform of size 2.10 x 0.76 x 0.76 m 1.71 Sq.m. 23522.90

and respected length with dhar polish or moulding having base 4" and support &

base with marble or kota as per site requirement also loft and base finish with

glaze tile and top with selected shed of marble or granite with gas pipe provision

and sink including all fittings, material and labour as per directed by Engineer

29 Providing and fixing PUF Insulated continueous sandwich panels for walls of 18.27 Sq.m. 3050.05

total thickness not less than 40 mm and width 1.0 m made out from continue

line method on automatic plant.Panel shall have 0.5 mm thick pre coated GI

sheet on both side of Polyurethane Foam confirming to IS 12436:1988.The

Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of minimum 120 gsm as per

IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron.The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during trasportation.The panels shall be

vertically joined together by tongue and groove joints. The PU Foam shall be self-

extinguishing, fire retardant type having minimum density of 40 Kg/Cu.mt.( +, -

Kgs) including 0.25 mm thick craft paper edging on both edges. The panels shall

be fixed to the steel frame structure with minimum 5mm thick self tapping GI

screws of required length and nos. with minimum spacing of 300 mm c/c.

30 Providing and fixing Aluminium partition sytem made from Powder coated 23.82 Sq.m. 1434.20

aluminum section of 63.50 x 38.10 x1.2mm and other section which is

necessory including 4 mm th. Glass fitting with beading clip having single side

film for vision barrier and bottom panel with pvc sheet as per design and all the

joint filled with silicon chemical neat and clean, all item must be executed as per

directed by engineer incharge and specification.

31 Providing & fixing a cupboard/wall drobe/shutter / cabinate/ basin unit/dressing 5.97 Sq.m. 9292.00

unit made from standard calibrating plywood of various size (i.e. 19 mm,

25mm, 12mm ,8 mm) and finish with seamless designer laminate of 1 mm thick

outerside & 0.8 mm th linear inside including all hardware 9i.e.

hinges,channel,handle , screw, fevicol & all misc) iteam to be executed as per

architecture design, drwaing & instructed as per engineer incharge.

structure : 25 mm, 19 mm plywood (green, surya , sagun,aerolam,Duro or Equi.)

Laminate : Greenlam,Century,Meriolam Or Equi.

Hardware : Hettich,Godrej, Haffle or Equi.

Form : dunlop, Everest or Eui.

32 Providing and fixing 35 mm thick shutters for Doors, windows and clerestory 37.30 Sq.m. 5533.80

windows including Indian teak wood frames 12 cm x 7 cm. size including black

enamelled iron oxidized fixtures and fastenings including primer coat of

approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled

(For Storage Shutter)

33 Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J 53.30 Sq.m. 727.13

or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

34 Removing dry or oil bound distemper by a washing and scraping and sand 678.14 Sq.m. 10.99

papering the wall surface smooth including necessary repairs to scratches

35 Removing dry or oil bound distemper by a washing and scraping and sand 183.15 Sq.m. 12.58

papering the wall surface smooth including necessary repairs to scratches

complete. (For ceiling)

36 Scraping oil paint from steel and other metal surface and making the surface 19.41 Sq.m. 49.32

even (with Hand Scraping.)

Rupees Twelve Lakh(s) Fifty One Thousand One Hundred Ninety Four And Paise Eighty Only

Deputy ExecutiveExecutive

Deputy Executive

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Deputy ExecutiveExecutive

Deputy Executive

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Shahera Godhra Godhra