Repair to Bridge over Jhilmilla Nallah at 2ndKm on Sirtol to Jhilmilla Road_Road_Pathole repair of approach road PMC and SC ,Colouring for the bridge portion _ 2.150 to 2.550

Plain Cement Concrete PCC Grade M15 in open foundation complete as per drawing and technical specifications

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.

Construction of RCC guide posts of 200 mm dia M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technocal Specification Clause.

12mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Out side wall.

Painting two coats with any approved colour of weather seal coat to out side surface of wall in Ground Floor