NIT NO. 13 ITEM NO. 24

S/O Submersible pump set with the following specifications: Head53 m, Discharge: 2000lpm, 2 stage, 40HP, delivery 100/4”.Make: B.S./Darling/DJB approved.

Providing GI pipe 100mm dia. Size, medium class with GI flange welded in both sides 3mtrs long with MS strips complete with threading work on each side of pipe each flange should be 4 holes and cut for cables . Make of Flange –ISI, Make of pipe: Jindal /Surya/Tata/ DJB Approved.

S/o GI bend with both ends having welding flange of size 100 mm dia. Make of Flange –ISI , Make of Pipe : Jindal /Surya/Tata/ DJB Approved Make.

S/o Required off Size full threaded nut-bolts of good quality suitable for 100mm GI pipes.

S/o G.I Tail Piece of 100mm dia, 1 mtr. Long size medium class completed with one end threaded and one end welded with flange as per sample. Make of Flange –ISI, Make of pipe: Jindal /Surya/Tata/ DJB Approved .

S/o G.I Tee of 100mm dia, . Make of Flange –ISI, Make of pipe: Jindal /Surya/Tata/ DJB Approved .

S/O rubber insertion joining sheet conforming IS608/79 with ISI mark 3mm thick. Make Jyoti or any other make approved by DJB.

S/O NRV 100mm dia CI double flange PN1.0 IS 5312. Make :- Kirloskar/ IVC/DJB approved

S/O Sluice valve 100mm dia CI double flange PN1.0 IS 5312. Make :- Kirloskar/ IVC/DJB approved

Supply of 25Sq.mm flat 3core copper cable. Make Gloster./havells/DJB approved

Supply of fully automatic oil immersed star delta starter suitable for 50-60 HP motor.Make :- Any DJB approved make

Lowering of submersible pumpset into the tank with the help of chain pulley/ manual labour, jointing of 100mm line into the existing 100mm line with the help of GI Tee and fixing of Valves and NRV as per site requirement. Connections of Submersible pump set with the fully automatic starter. Testing and commissioning at full load and no load with the full satisfaction of engineer in charge. This is a turn key job and it further includesany left out items which may be required during execution of work will be firm responsibility and no extra payment will be made.

Supply of 8 mm thick,200mm dia M.S. pipe conforming to ISI239 medium (B class).Make Jindal/Tata/DJB approved

Supply of 12 mm thick M.S. Flanges for 200mm line.

S/o Required off Size full threaded nut-bolts of good quality suitable for 200mm MS pipes

Supply of 200mm dia sluice valve PN-1.0 . Make: Kirloskar/IVC/Skope

S/O MS Bend 200mm conforming to ISI239 medium (B class). Make Jindal/Tata/DJB approved

S/O MS Tee suitable for joining 100mm line to 200mm line conforming to ISI239 medium (B class). Make Jindal/Tata/DJB approved

Dismantling of the existing 150mm line by digging as well as cutting as per site requirement Replacing of exisiting 150mm line by 200mm MS line with complete works i.e. executing allied electrical, mechanical and civil works i/c watch and ward, cartage, taking all safety precautions, Arranging all tools and tackles i/c welding set, gas cutter etc. Jointing of existing 100mm line with 200mm line using MS Tee. Fixing of 200mm sluive valves Testing and commissioning of all (E&M) equipments at NO load and as full load successfully. This is a turn key job and it further includesany left out items which may be required during execution of work will be firm responsibility and no extra payment will be made.

SANJAY SALES CORPORATION

VS ENGINEERING COMPANY

RISHABH ENGINEERS