Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-Finance HIMACHAL PRADESH HP | CHAMBA | HIMACHAL PRADESH | 176315 | L1 | Accepted-Finance Being lowest | |
| 2 | L2₹1.4 L+₹20,893.09 (17.9%)Rejected-Finance | L2 | Rejected-Finance Not lowest |
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
30 Mar 2026, 5:00 pmClosed
Executive Engineer
Jawali Division HPPWD Jawali
Replacement of damaged door, window and sanitary repair etcetera
2026_PWD_132234_3
No.PWJ/CB/TA/2025-26-10072 dated 17.03.2026
Open Tender
Civil Works - Buildings
Percentage
60 days
Jawali
Please refer Tender documents.
5 documents required · 5 mandatory
₹350
₹3,000
8 Apr 2026
24 Mar 2026
31 Mar 2026
24 Mar 2026
30 Mar 2026
24 Mar 2026
24 Mar 2026 - 30 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | |||||
| 2Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :for fixed portion anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC15) including carriage of material within all leads, lifts and other incidental . The rate is including royality charges, octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. | |||||
| 3Providing and fixing aluminium work for doors, windows ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15), including carriage of material within all leads, lifts and other incidental . The rate is including royality charges, octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. | |||||
| 4Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera with float glass panes of 4 mm (Four Milimetre) thickness (weight not less than10.00 kg/ sqm) (Ten kilogram per square metre) . complete as per the architectural, design, drawings, specification, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | |||||
| 5Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush end. with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre (Ten litre) low level flushing cistern with fitting and brackets, 40 mm(Forty milimitre) flush bend, 20 mm (twenty milimitre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required within all leads, and lifts disposed earth to be levelled and neatly dressed, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | |||||
| 6 | Providing and fixing 8mm (eight milimetre) dia C.P./S.S. Jet with flexible tube upto 1.00 Metre (One metre) long with S.S. traingular plate to Eureopean type W.C. of quality and make as per H.P.P.W.D. specifications complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | 1 | Number | - | - |
| 7 | Providing and fixing Orissa pattern W.C. pan of size 580x440mm (five hundred eighty into four hundred forty milimetre) White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap
at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | 1 | Number | - | - |
| 8 | Providing and fixing 10 litre (ten litre) capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | 1 | Number | - | - |
| 9Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat and connectingplates or angle cleats etcetera as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. | |||||
| 10Providing and fixing prepainted steel sheet roofing over steel trusses providing and fixing Kotar metal or equivalent prepainted single skin trapezoidal profile sheeting 0.60mm (zero point six zero milimeter) thick having 1060mm (one thousand sixty milimeter) cover width (overall width 1126mm (one thousand one hundred twenty six milimeter) 28mm (twenty eight milimeter) crest depth at 353 (three hundred fifty three) + (plus minus) 2mm (two milimeter) centre to centre crest distance there will be two ribs at the centre for stiffening having depth of 2.5mm (two point five milimeter), main crest width at top 25mm (twenty five milimeter) and at the lower 81mm (eighty one milimeter) base metal of cold rolled steel coil with zinc coating top coat with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint, fixing of sheet shall be with self drilling and self tapping screws of size 5.5mm (five point five milimeter) dia 75.5mm (seventy five point five milimeter) length with EPDM seal. The material supply will be accompanied by test certificate and against corrosion/ fading colour and manufactured defects, including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, Malkana, toll tax, GST or other taxes imposed by the Government. | |||||
stage.html
html • 0.04 MB
technical_195545.pdf
techsummary_195545.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
SBD.pdf
Tender Documents • 17.70 MB
BOQ_195545.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .