Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED LOWEST BIDDER L1 | |
| 2 | L2₹42.6 L+₹1.2 L (2.94%)Rejected-Finance 18 MOTI BAGH BABYAL ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Being rejected L2 |
Tender Value
₹46.0 L
EMD Value
₹92,097
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ABHINANDAN KUMAR MISHRA EE IDSE
GE (SOUTH) AMBALA CANTT
CA NO GE (SOUTH) AMB 75 2023 2024 PROVISION OF CERTAIN SANCTIONED BR AND EM WORKS OF AGE BR I (SOUTH) AREA UNDER GE (SOUTH) AMBALA CANTT
2024_MES_643319_1
GE(SOUTH)/AMB-75/2023-2024
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) AMBALA CANTT
AS PER NIT
9 documents required · 9 mandatory
₹500
GE (SOUTH) AMBALA CANTT
₹92,097
Yes
9 May 2024
20 Feb 2024
23 Mar 2024
20 Feb 2024
21 Mar 2024
8 Mar 2024
20 Feb 2024 - 4 Mar 2024
Amount
Demolition of cement concrete (any type) for existing sunken portion of WC/Floor trap including removing of all debris from site to a distance exceeding 250 m but not exceeding 500 m and deposited where directed including cleaning of surface with wire brushes and water complete all as specified and directed.
Supply and fixing of GI tubing, ISI Marked, 50mm bore, medium grade as in spout complete all as specified and directed.
Material and labour for cement concrete in foundations, filling and mass concrete type E2 1 : 5 :10 using 40 mm graded aggregate as in under sunken floor complete all as specified and directed.
Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications and sequence complete as specified and directed:- (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.
Demolition of old brick masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.
Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
Material and labour for Brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) complete all as specified and directed. Note: old bricks obtained from demolition shall be re used. The rate quoted against this item is inclusive of necessary cleaning and stacking of bricks before incorporation in the work.
Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 15mm thick rendering in cement mortar (1:4) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 5 mm thick rendering in cement mortar (1:3) on soffits of slabs etc ceiling surface and finished the surface even and smooths including preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceilings etc complete all as specified and directed.
Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed. Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.
Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer on walls complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of wall care putty not less than 1mm thick as per manufacture instructions complete all as specified and directed.
Material and labour for preparing of old surfaces of ceiling and applying two coats of white wash on ceilings complete all as specified and directed.
Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in- Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying two coats of cement base paint over a coat of alkali resistant primer upto to 12 metre including necessary scaffolding etc complete all as specified and directed.
Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed.
Material and labour for preparation of old plastered or unplastered surfaces on walls by washing rubbing and applying two coats of white wash on walls complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash on wall, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing debries out side defence area complete all as specified and directed.
Demolition of lime concrete or cement conrete of any description in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete including disposal of unserviceable rubbish outside defence area complete all as specified and directed.
Material and labour for roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc with and including brushing neat cement slurry with 3 Kg of cement per square metre complete all as specified and directed.
Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in levelling course complete all as specified and as directed.
Material and labour for premium quality, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floors etc, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
Material and labour for premium quality coloured glazed ceramic tiles (300x 450x 7 to 8mm thick) as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the shade of tiles over and including rendering 10mm thick in cement plaster 1:4 finished rough surface to receive tiles complete all as specified and directed.
Material and labour for machine cut kota stone slab 20-25 mm thick for staircase steps in single piece (of length not more than 1200mm), over and including cement screed bed 15 mm thick in cement mortar (1:3) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete including provn of two Nos 3x3mm grooves at tread of each step complete all as specified and directed.
Material and labour for machine cut kota stone slab 18-20 mm thick size of each stone in single piece (of length not more than 1200mm), laid on vertical surfaces of riser of steps, skirting/dado, over and including cement screed bed 15 mm thick in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Material and labour for machine cut kota stone slab 20-25 mm thick ( size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:4) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed.
Material and labour for 18 to 20mm thick granite stone of any colour (of any type) work (table rubbed, polished & moulding) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, polishing, rounding and moulding of stone slabs on edges etc complete including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).
Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre but not exceeding 4 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed. (NOTE : - The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid)
Taking down shutter of any descritption exceeding 1.00 sqm each but not exceeding 2.00 sqm each including removal from site complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm and not exceeding 2 Sqm each and refixing in same opening after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc complete all as specified and directed.
Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete complete all as specified and directed. NOTES : - (i) The ATT work shall be carriedout through specialised agency as approved by GE in writing and chemical used shall be approved before execution of work. (ii) 5% amount of the total amount of ATT shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. Contractor's quoted rate for this item shall deemed to be inclusive of this aspect.
Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position of unframed/ framed work complete all as specified and directed.
Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) coloured solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast / lugs /SS dash fasteners of required dia and length complete all as specified and directed. NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. (ii) Material manufacture test certificate should be provided before execution of work.
Supply and fixing of factory made solid PVC moulded coloured door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site with 03 Nos extruded aluminium alloy butt hinges 100mm, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed
Supply and fixing of factory made single extruded 100% solid WPC coloured (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 100 mm x 65 mm Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm & manufactured by " RAJSHRI " an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of (Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed with mild steel hold fast / lugs /SS dash fasteners of required dia and length complete all as specified and directed. NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. (ii) Material manufacture test certificate should be provided before execution of work.
Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) coloured solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 03 Nos extruded stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.
Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm size complete all as specified and directed.
Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 150mm long complete all as specified and directed.
Supply and fixing of extruded aluminium alloy handles, fabricated type, anodized of size 150 mm long complete all as specified and directed.
Supply and fixing of factory made steel windows/ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, etc complete all as specified and directed.
Supply and fixing of mild steel, framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks and similar work including pintal hinges, stops hand made sliding bolts etc conforming to Fe-290 Gde E-165 complete all as specified and directed.
Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing in repair of aluminium pre coated of choice colour designed type 25 mm tubular rod in curtain rod, 1.6mm fancy type including PVC golden colour brakets, latto and wall to wall socket etc., complete all as specified and directed.
Supply and fixing in repair of pegs set of 6 Nos, power coated GI fixed with cadmium plated screws complete all as specified and as directed.
Supply and fixing in repair of stainless steel plate rack 1 mm thick of size 750 x 600 x 200 mm weighing not less than 8 Kg each fix with stainless steel screw to wall, complete all as specified and directed.
Supply and fixing of factory made Single Extruded WPC (Wooden Polymer Composite) coloured solid Plain Board 18mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 12 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete with 03 Nos stainless steel butt hinges with SS screw of required size for each shutter all as per specification & drawing complete all as specified and directed NOTE : - Material Test Certificate & Authentication should be provided by the manufacturing company.
Supply and fixing of factory made Single Extruded WPC (Wooden Polymer Composite) coloured solid Single Side PVC Laminate with PVC Foil of minimum 14 Microns thick of approved color shade Board 18mm Thick comprising of virgin polymer of K Value 58 -60 ( Suspension Grade) , Calcium Carbonate & Natural Fibers ( Wood Power / ) Rice Husk /Wheat Husk ) & Non Toxic Adhesives ( Maximum Toxicity index of 12 for 100 gram ) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N ( face ) & 900 N ( Edge) , Minimum Compressive strength 50 N/ mm 2 . Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete with 03 Nos stainless steel butt hinges with SS screw of required size for each shutter all as per specification & drawing complete all as specified and directed NOTE : -Material Test Certificate & Authentication should be provided by the manufacturing company.
Supply and fixing of factory made Single Extruded WPC (Wooden Polymer Composite) coloured solid Plain Board 12mm Thick comprising of virgin polymer of K Value 58 -60 (Suspension Grade), Calcium Carbonate & Natural Fibers (Wood Power / Rice Husk /Wheat Husk) & Non-Toxic Adhesives (Maximum Toxicity index of 12 for 100 gram) having minimum density of 650 Kg/ CUM & Screw withrawal strength 1800 N (face) & 900 N (Edge), Minimum Compressive strength 50 N/ mm 2. Modulus elasticity 850 N / mm Sq & Resistance to spread of flam of class A category with property of being termite/ borer proof, Water Proof/ Moisture Proof & Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threated star headed counter sunk SS Screws,, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete with 03 Nos stainless steel butt hinges with SS screw of required size for each shutter all as per specification & drawing complete all as specified and directed. NOTE : - Material Test Certificate & Authentication should be provided by the manufacturing company.
Supply and fixing of lipping 1-1.5 mm thick 18 mm wide, coloured, of approved design and colour, fixed with solvent cement or headless nails to boards etc complete all as specified and directed.
Material and labour for running welding in repairs thickness of metal to be welded exceeding 6mm but not exceeding 9mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, in the case of metal exceeding 3 mm thick complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections include cleaning for refixing or removal, complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections include cleaning for refixing or removal, complete all as specified and directed.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required complete all as specified and as directed.
Supply and fixing of GI tubing, ISI Marked, 20mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required complete all as specified and as directed.
Refixing old serviceable steel water tubing of 15 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls and ceilings or laying in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed
Refixing old serviceable steel water tubing of 20 mm bore, in new or old position, any grade, including S&F new fittings as required, fixed to walls or laid in floors/roofs etc including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required , including taking down of old tubing as existing at site and removal, complete all as specified and as directed
Supply and fixing of chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.0 m spacing. includes jointing of pipes & fittings with one step CPVC solvent cement with testing of joints including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required, complete all as specified and directed.
Supply and fixed in repair of vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.
Supply and fixing in repair of vitreous china squatting pan of 'Orissa' pattern' size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket etc complete all as specified and directed.
Supply and fixing in repair of 10 litre capacity virgin polypropylene cistern, white at low level complete with 32 mm bore PVC flush pipe of suitable length, PVC connection 450 mm long having PTMT nuts including bracket and making all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.
Supply and fixing in repair of vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, PVC connection 450 mm long having PTMT nuts and 32 mm dia brass chromium plated waste coupling including 32 mm dia PVC waste pipe etc., complete all as specified and directed.
Supply and fixing in repair of CP Health faucet shower including 1.50 meter long flexible tube complete all as specified and directed.
Supply and fixing in repair of brass CP toilet paper holder, recessed type, fixed to wall with brass CP screws complete all as specified and directed.
Supply and fixing in repair of CP Water purifier RO Connecting piece for Water Bib Tap for inlet of RO etc complete all as specified and directed.
Supply and fixing in repair of 15 mm dia chromium plated, cast copper alloy, two way angle cock with flange complete all as specified and directed.
Supply and fixing in repair of two way bib tap with flange, screwed down high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and as directed.
Supply and fixing of sheet glass corner assembly consisting of 5.5mm thick sheet glass shelf 300mmx300 mm with chromium plated bracket guard and railing complete fixed in repair all as specified and directed.
Supply and fixed in repair of chromium plated, bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed. (Note : Weight of bib tap shall not be less than 0.575 Kg)
Supply and fixing in repair of bib tap screwed down high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and as directed.
Supply and fixing in repair of stainless steel grating openable 100mm dia with or without hole including fixing with white cement complete all as specified and directed.
Supply and fixing in repair of stop valve 15mm dia, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed. (Note : Weight of stop valve shall not be less than 0.575 Kg)
Supply and fixing of stop valve 15mm dia, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and as directed. (Note : Weight of stop valve shall not be less than 0.575 Kg)
Supply and fixing in repair of stop valves, 15 mm dia, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete all as specified and directed. (Note : Weight of stop valve shall not be less than 0.575 Kg)
Supply and fixing in repair of 20 mm dia gun metal, globe or gate valve with Iron wheel head Screwed both ends for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repair of chromium plated shower rose with swivel joints and including fixed to GI tubing 15mm bore size of shower not less than 125mm complete all as specified and directed.
Supply and fixing in repair of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repair of chromium plated soap dish superior quality, fancy type fixed with and including brass CP screws complete all as specified and as directed.
Supply and fixing in repair of aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete as all specified and directed
Supply and fixing of PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.
Supply and fixing in repair of PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.
Supply and fixing in repair of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repair of PVC coloured bathroom cabinet overall size 450 x 350 mm decorative design with looking mirror, nepkin rail complete all as specified and as directed.
Demolition and breaking up 100/75 mm (PVC (SWR) pipe, salt glazed ware, AC or reinforced concrete) pipes, set in cement mortar complete all as specified and directed.
Supply and fixing of 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with stack clamps, 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed
Supply and fixing of 75mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls with stack clamps, 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed
Supply and fixing of 100mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
Supply and fixing of 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
Supply and fixing of 100 mm bore PVC (SWR) bend any radius including jointing with solvent cement with oval access door complete all as specified and as directed.
Supply and fixing of 75 mm bore PVC (SWR) bend any radius including jointing with solvent cement with oval access door complete all as specified and as directed.
Supply and fixing of 110mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing of 75mm bore PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and as directed.
Supply and fixing in repairs of 110mm bore PVC (SWR) junction single 'T' (equal or unequal), including jointing with solvent cement complete all as specified and directed.
Supply and fixing in repairs of 75mm bore PVC (SWR) junction single 'T' (equal or unequal), including jointing with solvent cement complete all as specified and directed.
Supply and fixing in repair of 100 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing in repair of 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm complete all as specified and directed.
Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore complete including dismantling/ taking out of old water tank & removing from site complete all as specified and directed. Note:- Make of tank shall be engraved on the tank.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.
Material and labour fo spreading and levelling of soft/loose soil in layers not exceeding 25 cm thick and well ramming including watering as required etc complete all as specified and directed.
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and as directed.
Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as copings, bed plates, benching, kerbs, on edge for sealing interlocking tiles and other bands and the like, finished the surface fair and even, including necessary form work etc complete all as specified and directed.
Dismantling/taking down carefully aluminium/ copper point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.
Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic, heavy duty PVC concealed conduit not less than 25mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI flush boxes / sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring & earth wire shall be connected to each & every flush/sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.
Description all as per item No 109.00 above but for socket out let point 5 Amps on same board complete all as specified and directed.
Description all as per item No 109.00 above but for socket out let point 5 Amps on independent board complete all as specified and directed.
Description all as per item No 109.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed.
Supply and fixing of modular switches, one way, 6 amps one module, 230V, AC supply, ISI marked complete all as specified and directed.
Supply and fixing of modular switches, one way, 20 Amps, one module, 230 volt , AC supply, ISI marked complete all as specified and directed.
Supply and fixing of modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed.
Supply and fixing of modular socket outlet 6/20 amps, 2/3 pin, 2 module, complete all as specified and directed.
Supply and fixing of ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed.
Supply and fixing of lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.
Supply and fixing of LED lamp 9 watt B-22 base complete all as specified and directed.
Supply and fixing of heavy duty exhaust fan metallic body 300 mm sweep having, four blades with and including louvers, electric, single phase 1400RPM, 240 volt 50 Hz complete and making suitable hole in existing cement concrete / brick walls built in cement mortar 1:4 and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surfaces to match with the existing surface including plastering as required & finishes including grouting four Nos rag bolts, nuts & washers and connecting with 3 core copper flexible cable of size 23/0.0076 including testing & commissioning after installation at site complete all as specified and directed.
Taking down unserviceable sheet metal enclosure SP with two pin and earth plug and socket etc complete all as specified and directed.
Supply and fixing of sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'B' curve, 240 volts complete all as specified and directed.
Supply, installation, testing of SPN distibution board 8 way,double door , IP 43, as per IS 8623 including 100 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles/glands including taking down existing unserviciable MCB/DBs including MCBs complete all as specified and directed.
Supply and fixing of MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of MCB single pole and neutral, 240 volts, 50Hz, breaking capacity 10KA, 'B' curve 40 to 63 Amps, including connection with suitable size copper lugs complete all as specified and directed.
Taking down old unserviceable sub main wiring any type and any description complete all as specified and directed.
Material and labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm, green colour for earth continuity conductor and making good the disturbed surface complete all as specified and directed. NOTE : - 3 run of cable and 1 run of conduit shall be measured as 1 unit. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary aceessories/fittings.
Supply and fixing of channel for fixing of LED tube rod of CRCA body suitable for 18/20 watt LED tube, high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed. (Tube rod shall be measured and paid for separately). NOTE : - Channel must be get approved from Engineer in charge to check fesibilty i.e. one end contact or two end contact.
Supply and fixing of 18 Watt / 20 Watt LED tube light two end contact, fitting should have lumen output more than 100 lumens per watt, environment friendly, high efficient, T8 with aluminium extrusion heat sink for optimum performance with high luminous efficiency and easy and taking down existing tube light and removal complete all as specified and directed. NOTE: - Tube rod must be get approved from Engineer in charge to check fesibilty i.e. one end contact or two end contact for fixing in existing LED fittings.
Supply and fixing of surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with two core 1.5 Sqmm copper conductor cable from ceiling rose to connector of the light complete all as specified and directed.
Supply and fixing of LED bulk head light fitting, 10 watt with min 800 lumen, industrial model IP 65, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete complete all as specified and directed.
Supply, installation and testing of storage type heater (Geyser) of 25 litres capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years (b) For metal tank 07 years.
Material and labour for taking down existing geyser with electric and water connection of any capacity with keeping in safe custody and refix the same after completion of work including necessary electric and water connection and testing after completion all as specified and directed
Taking down existing temperature resistent incoming / out going water connections of Geyser with washer etc. complete all as specified and directed.
Material and labour for temperature resistent SS braided pipe suitable to sustaine pressure up to 8 bar not less than 60 Cm long suitable for incoming / out going water connections of Geyser with washer etc. complete all as specified and directed.
Taking down old existing stop valve of any type of 15 mm bore complete all as specified and directed.
Material and labour for cutting and screwing existing steel tubing in position without taking down for alterations or additions or lengthening screw on pipe to connector for 20mm bore complete all as specified and directed.
NOTE:- Amount of credit of Rs. 67,214.50 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender.
Gupta Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .