enquiry for CARRYING OUT OMPL -LOADING ARM MAINTENANCE, PIPING MODIFICATIONS ,STRUCTURAL FABRICATION PAINTING JOBS AT OMPL, JETTY 13 inside NMPT

Electrical Items :

Scaffolding Erection for Maintenance of Px and Bz Loading Arms

Greasing Swivel Joints of size 16"

Greasing Swivel Joints of size 10"

Greasing Swivel Joints of size 8"

Greasing of QC/DC Coupler Guide, ERC Clamp cylinder, Mechanical Lock Pin etc. of Both Loading Arms

3/8" Hydraulic Hose with Gland Nut of size M 20 on both Sides

1/2" Hydraulic Hose with Gland Nut of size M 24 on both Sides

5/8" Hydraulic Hose with Gland Nut of size M 30 on both Sides

Valve Greasing Size 2" 150#

Valve Greasing Size 3" 150#

Valve Greasing Size 8" 150#

Valve Greasing Size 10" 150#

Valve Greasing Size 12" 150#

Valve Greasing Size 12" 300#

NRV Maintenance 2" 150#

Pump Preventive Maintenance such as Greasing, Oil Changing Etc

CBD PUMP Breakdown maintenance assistance,Job includes- Dismantling: decoupling ,dismantling motor & pump from installed location,opening of pump,removal of impeller,impeller sleeve,removal of bearing block,removal of bearing . Installation: installation of beating,sleeve,shaft,impeller and boxup of pump,reinstallation to position,installation of motor,coupling.

Spading and Despading of 12" 300# Flange

Spading and Despading of 12" 150# Flange

Spading and Despading of 10" 150# Flange

Spading and Despading of 8" 150# Flange

Spading and Despading of 2" 150# Flange

Spading and Despading of 3" 150# Flange

Assistance for Line Flushing of Size 12" of Approx 25 meter length including Hose connection, Water Filling from tanker and Draining

Assistance for Line Flushing of Size 2" of Approx 40 meter length with multile pipe branches including Hose connection, Water Filling from tanker and Draining.

2" Size 150# Valve Dropping & Erection

8" 150# Valve Dropping & Erection

10" 150# Valve Dropping & Erection

12" 150# Valve Dropping & Erection

12" 300# Valve Dropping & Erection

12" 150# MOV Erection after the Modification

Welding of CS Piping Upto 10mm Thk

Erection of CS Piping Upto 10mm Thk

Welding of SS Piping Upto 6.00mm Thk

Erection of SS Piping Upto 6.00mm Thk

Flange Bolt Replacement 2" -150#,300# due to Corrosion (Job includescutting of bolts using gascutting/cutting wheel and replacing with new stud bolts)

Flange Bolt Replacement 3" -150#,300# due to Corrosion(Job includescutting of bolts using gascutting/cutting wheel and replacing with new stud bolts)

Flange Bolt Replacement 10" -150#,300# due to Corrosion(Job includescutting of bolts using gascutting/cutting wheel and replacing with new stud bolts)

Flange Bolt Replacement 12" -150#,300# due to Corrosion(Job includescutting of bolts using gascutting/cutting wheel and replacing with new stud bolts)

Fabrication & welding of CS shoe support / corrosion pads

Wrapping coating of UG 2" CBD Drain Line

Fabrication & erection of MS structures (structural steel supplied by OMPL)

Dismantling of Structures

Dismantling of Piping

HAND TOOL/MANUAL CLEANING TO SSPCSP-2

PRIMER COAT,ONECOAT OF EPOXY MASTIC,100 MICRON DFT(SELF PRIMING TYPESURFACE TOLERANT HIGH BUILD EPOXY COATING), P-2 OF OMPL PAINT SPEC OMPL/INSP/PAINT/SPEC - REV0

INTERMEDIATE COAT, ONE COAT OF EPOXY HIGH BUILD FINISH PAINT 100 MICRONS DFT, P-3 OF OMPL PAINT SPEC OMPL/INSP/PAINT/SPEC - REV0

FINISH COAT OF ONE COAT OF ACYRYLIC POLYURETHANE FINISH PAINT, 40 MICRONS DFT(WHITE/GREY), P-5 OF OMPL PAINT SPEC OMPL/INSP/PAINT/SPEC - REV0

M 20 X 450 Chemical Anchor Fastener fixing( Embeded Length is 400mm)

M 16 X 350 Chemical Anchor Fastener fixing( Embeded Length is 300mm)