Loading…
Loading…
Tender Value
₹4.9 Cr
EMD Value
₹9.9 L
Closing Date
14 Jul 2026, 3:00 pm
Similar tender results from the same govt authority in the past 3 years.
Civil work in connection of the Junagadh-Relocation of MG Station from existing place to Grofed Area.
89-2026-27
89-2026-27
Open
8 Months
Junagadh, Gujarat
₹0
₹9.9 L
22 Jun 2026
22 Jun 2026
30 Jun 2026
Item Breakup - A-DSR 2023
than 85 gms 18.65 Providing and fixing PTMT soap Dish Each 2 111.45 222.9 Holder having length of 138mm, breadth 163 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 18.90 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90 degree 164 18.90.2 For 22.22 mm outer dia pipe Each 2 113.8 227.6 165 18.90.3 For 28.58 mm outer dia pipe Each 2 163.6 327.2 166 18.90.6 For 48.60 mm outer dia pipe Each 2 273.15 546.3 Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWA G116 18.92 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Equal Tee 167 18.92.2 For 22.22 mm outer dia pipe Each 2 300.2 600.4 168 18.92.3 For 28.58 mm outer dia pipe Each 2 466.6 933.2 169 18.92.6 For 48.60 mm outer dia pipe Each 2 1429.75 2859.5 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 170 19.1.2 150 mm diameter Metre 2 695.8 1391.6 171 19.1.5 300 mm diameter Metre 2 2064.15 4128.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 19.2 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 172 19.2.2 150 mm diameter S.W. pipe Metre 10 1179.85 11798.5 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar 19.6 in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 173 19.6.1 100 mm dia. R.C.C. pipe Metre 60 507.05 30423 174 19.6.4 300 mm dia. R.C.C. pipe Metre 20 994.3 19886 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey 19.32 comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non Each 1 26861.9 26861.9 175 modular) bricks of class designation 7.5 21.0 ALUMINIUM WORK 21.1S General BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene 21.1 gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised Kg 80 495.05 39604 transparent or dyed to required shade 176 according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum Kg 60 530.9 31854 177 thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for 21.1.2 fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised Kg 60 598.6 35916 transparent or dyed to required shade 178 according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.2.2 Powder coated aluminium (minimum Kg 80 634.45 50756 179 thickness of powder coating 50 micron) 23.0 RAIN WATER HARVESTING & TUBEWELLS 23.1S General Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ 23.2 bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in- charge, beyond 90 metre & upto 150 metre depth below ground level. 23.2.1 All types of soil 180 23.2.1.1 300 mm dia Metre 120 825.7 99084 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 23.4 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in- charge. 181 23.4.3 200 mm nominal size dia Metre 120 1255.7 150684 26.0 NEW TECHNOLOGIES AND MATERIALS 26.1S General BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, 26.19 vertical or curved surfaces including cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealant where required etc. but excluding the cost of purlins, rafters and trusses. 26.19.1 0.71 mm thick, the profile detail width Sqm 373 1153.95 430423.35 182 1044/920 mm, cover width 1000/875 mm. 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.68 of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse cum 99.36 7387.25 733997.16 183 sand) Providing and laying factory made Precast concrete solid blocks of 200 mm thickness 26.69 of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse cum 136.74 9844.65 1346157.44 184 sand) Total 61210644.13
Item Breakup - B-USSOR
All kinds of soils
Soft rock (not requiring blasting)
Hard rock (blasting prohibited ) BHAVNAGAR DIVISION-ENGG/WESTERN RLY Providing and laying in position Plain cement concrete of specified Nominal Mix f o r miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level :
1:1½:3 (1 Cement: 1½ coarse sand (zone- cum III) : 3 graded stone aggregate 20 mm nominal size)
1:2:4 (1 cement : 2 coarse sand (zone-III) : cum 4 graded stone aggregate 20 mm nominal size) Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the following Reinforced cement concrete structural elements up to height of 9.0 m from foundation top level, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item.
Wing wall and Return wall
Providing and laying Plain Cement cum Concrete 1:3:6 with graded stone aggregate of 40mm nominal size, in foundation and floors, retaining walls of b r i d g e s including mechanical mixing, vibrating, pumping and bailing out water where ever required with all materials and labour complete but excluding the cost of cement and shuttering as per drawings and technical specifications as directed by Engineer.
Providing and fixing Weep Holes in Metre Abutments, Wing walls and Return walls etc., of new bridges with 110mm dia UPVC pipe Type A ISI marked with all contractor's men, material, transportation, all taxes as per specifications and as directed by Engineer-in-Charge. BHAVNAGAR DIVISION-ENGG/WESTERN RLY
Providing and casting machine batched, cum machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix, mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants, (Cast in- Situ/Pre-cast) in bottom/top slab, side walls, toe wall and sumps haunch filling head walls, thrust bed or any other component using 20mm graded crushed stone aggregate and coarse sand of approved quality of RCC box of any size including finishing, Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings and technical specifications as directed by Engineer in charge. Note: 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item.
Providing and applying two coats of coal Sqm tar or bitumen confirming to IS:3117- latest version on the top and sides of RCC box/slabs @ 1.70 kg/sqm after cleaning the surface with all labour and materials complete job as directed by the Engineer. Centering and shuttering including strutting, propping etc. and removal of form for :
All types of bridge sub-structures, e.g. Sqm pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level Supply and using Cement at Worksite
Ordinary Portland Cement 53 grade of MT approved brands/makes Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Thermo-Mechanically Treated grade Fe-500D or more of approved brands/makes. BHAVNAGAR DIVISION-ENGG/WESTERN RLY
Casting and installation of single/twin RCC cum box of all sizes with or without common web section including design of pushing scheme, thrust bed, casting of all RCC components, with specified grade of controlled concrete, pushing it in correct position and alignment below Railway track/Road following all measures of track safety by 'Box pushing technique" as per approved drawings/scheme, with or without surcharge in all types of soils with disposal of surplus earth away from vent up to 1 Km, fixing arrangement for all services & utilities including parapet walls on both sides, wearing course, foot paths, plaques, drainage arrangements etc. and all other incidental works to complete the ROB/RUB/Canal crossing in all respect as per specifications to the satisfaction of Engineer-in-Charge. N o t e : 1. The rate includes all items of work/supplies for complete job in all respects except "cost of Reinforced cement concrete, cement, reinforcement & shuttering" of (i) main RCC Box; (ii) Thrust Bed; (iii) Footpath (iv) Parapet wall and (v) wearing Course only, which shall be paid extra under relevant items of USSOR. 2. In case Drag Sheet and/or Rail Cluster are to be used as per approved scheme and design, the same shall be paid extra under relevant item. 3. The payment for this item shall be made for the clear inner cross section area of the parent RCC Box/Boxes and barrel length i.e. clear inner volume of parent RCC Box/Boxes. Providing road crane of specified lifting capacity with specified jib length revolving type for material handling, assembly & erection of girders/slab/RCC Box etc.
250 MT capacity Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site.
JCB Backhoe Loaders 3DX Plus or similar Hour with minimum 1.10 cum bucket capacity
Tractor with Trolley for local transportation Hour or other misc. works. Total 6837154.17
Item Breakup - C-Electrical items
NS/1: SETC of 3 mtrs mild steel decorative Numbers pole for garden lite as per specification.
NS/2: SETC 40 W Decorative LED Garden Numbers lamp Post fitting For Decorative Garden Poles as per specification. BHAVNAGAR DIVISION-ENGG/WESTERN RLY
NS/3: Supply .Installation, Testing and Numbers Commissioning of 125 Amp FP MCCB microprocessor based as incoming & 2x63 Amp FP MCB AND ( 6 x 4 to 20 A) MCB DP as outgoing with ammeter, voltmeter, indicator lamp etc in enclosure and wiring as per specification
NS/4: SETC of distribution board having 63 Numbers Amp TPN as incoming and 4 nos. 20Amp MCB DP and 2 nos. 16 Amp MCB SP as outgoing as per specification
NS/5: SETC of drinking water cooler of 150 Numbers liters storage capacity as per specification
NS/6: SETC of GI Octagonal 5 meter long Numbers multi- purpose pole with double bracket, foundation and all accessories as per technical specification shown in Para (A) of Annexure.
NS/7: SETC of LED street light 45 W fitting Numbers complete with all accessories etc. as per specification (Rate of Supply Rs.2827 + Rate of erection Rs. 282)
NS/8: Surface / Concealed wiring of light / Numbers fan/ exhaust fan point.
NS/9: Surface / Concealed wiring of sub- Metre main with 4mm² copper wire in PVC conduit
NS/10: SETC of two switches andsocket 6 Numbers amp
NS/11: SETC of Energy Efficient BLDC Numbers celling fan of 1200 MM sweep with regulator & all other Accessories as per specification. (Rate of Supply Rs.3677 + Rate of erection Rs. 113)
NS/12: SETC of Exhaust fan 250 mm Numbers sweep, colour White/Blue blades with white dome & white body. I t should be suitable to work on -250 V AC 50 C/S complete with all accessories as per specification.
NS/13:Supply, wiring, fixing, connecting, Numbers testing and commissioning of energy efficient LED fittings recess mounting suitable for false ceiling 2'x2', 36-38 Was per specification (Rate of Supply Rs.2540 + Rate of erection Rs. 254)
NS/14: SETC of 18 W LED Tube light fitting Numbers 4' length complete with LED tube etc. as per specification. (Rate of Supply Rs.373 + Rate of erection Rs. 37)
NS/15: SETC of MCB DB with incoming 32 Numbers amp DP MCB& outgoing 4x16 amp DPMCB as per specification
NS/16: SETC of MCB Single Phase RCBO of Numbers 32 A capacity , 30 m Sensitive with metal enclosure as per specification
NS/17:Digging 450x1000mm size in RCC/PCC/hard soil & riffling as per specification
NS/18: Supply of 4 core 16 sqmm XLPE Metre insulated and PVC sheathed armored aluminum cable as per specification
NS/19: Transportation, laying installation Metre Termination, testing and commissioning of LT cable of size 4 x 10 sqmm to 4 x 300 sqmm in existing trench pipe or on structure. BHAVNAGAR DIVISION-ENGG/WESTERN RLY
NS/20: SETC of 18 W LED Down light fitting Numbers as per specification.
NS/21: Supply .Installation, Testing and Metre Commissioning of 8 SWG G.I. Wire as per specification
NS/22: Supply and laying of DWC Pipe 50 Metre mm dia.
NS/23: Supply of material and providing Numbers earthing as per IS 3043-187 as amended latest and as per specification
NS/24: Supply of Energy Efficient 10 HP Numbers (7.5 kw) capacity open well horizontal submersible pump motor set minimum 900 LPM at 30 metres head as per specification.
NS/25: Supply of fully automatic star delta Numbers starter suitable for 10 HP capacity submersible pump motor set operated on 415 volt, 50HZ AC, 03 Phase power supply with over voltage protection relay, single phase preventor relay, over load relay range approx 13 to 22 AMps as per specification.
NS/26: Supply of copper conductor Metre submersible cable of 3 core 6 sq mm
NS/27: SETC of grid connected solar plant Numbers with comprehensive waranty of 5 years as per specification.( Kw means Nos ) Total 1765632.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022withallcorrectionslipsupto11.pdf
ATTACHMENT
SpecialconditionofcivilworkJND.pdf
ATTACHMENT
PCECircularNo88forImprovementofQualityofWorks.pdf PCE CIRCULARS 88
ATTACHMENT
3SafetyInstructionsatWorkSites.pdf
ATTACHMENT
4RBcircularforDiggingwork.pdf
ATTACHMENT
ilovepdf_merged3.pdf
ATTACHMENT
PCECircularNo88forImprovementofQualityofWorks.pdf
ATTACHMENT
Download all tender documents and submit your bid