MAINTENANCE AND REPAIRS TO INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN MAP QTRS AND CIVILIAN MARRIED ACCN AT AFS BIDAR

Amount

(a) Contractor shall detail his supervisor to office of AGE E/M (Bidar) daily by 9.00 AM who will report to concerned JE E/M / Engineer-in-Charge to receive all complaints related to (electrical fittings / fixtures, internal wiring) of entire area under this contract. (b) Contractor shall provide requisite tools, equipments, including safety measures for attending complaint and ensure completion report by 5.00 PM on same day. (c) Contractor to arrange material and labour for collecting complaint slips from MES Complaint cell, rectifying the complaint.

Supply and fix in repairs, switch piano flush type, single pole, one way, 5/6 Amp, all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, ceiling rose surface Bakelite, 63.5 X 28 mm, three terminals all as specified and as directed byEIC.

Supply and fix in repairs, switch socket combination 2 in 1, 6A flush type all as specified and as directed by Engineer in Charge.

Supply and fix in repairs, Switch socket combination 3 pin 16A, flush type all as specified and as directed by Engineer in Charge.

Supply and fix in repairs, switch bell push piano, flush ,single pole, 5/6 Amp, all as specified and as directed by Engineer in Charge.

Supply and fix in repairs, switch modular type single pole one way 6 Amp with all accessories all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, switch modular type single pole one way 16 Amp with all accessories all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs, socket outlet, 3 Pin 6 Amp, modular type with all accessories all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs socket outlet multipurpose 3 Pin 16 Amps modular type with all accessories all as specified and as directed by Engineer-in-Charge.

Supply and fix repairs, Bell push modular type, 6A with all accessories all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, lamp holder, angular type, PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitable for general lighting system complete all as specified and as directed by Engineer-in-Charge.

Supply and fix repairs, 240V, 20 Amp single pole and earth enclosure with a two pin and earth plug and socket complete all as specified and as directed by engineer-in-Charge.

Supply and fix in repairs, MCB DB SPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fix in repairs, MCB DB SPN 8 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fix in repairs, MCB DB TPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fix in repairs, MCB TPN 63 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB TPN 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SP 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SPN 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SPN 63 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, bell AC 230 Volt Ding Dong type.240 Volt AC supply complete all as specified and as directed by Engineer-in-Charge. Make Anchor/Leader/K555/Rider.

Taking down unserviceable light fittings'and S&F high efficient LED bldg security light fitting of 45 W 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete all as specified. Make Philips / CG / Havells

Supply and fixing in replacement MCCB of following ratings, breaking capacity in existing panel board, connecting with proper size link set, incoming, out going cable electrically connected and making necessary modification in existing panel as required at site complete all as specified and directed by Engineer-in-Charge

Four Pole, 125 Amp, 16 KA

Four Pole, 100 Amp, 16 KA

Four Pole, 63 Amp, 16 KA

Supply and fix in repairs fan regulator, AC, 230V, single pole electronic, step type, complete, all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Two module, Fan regulator, step type, AC, 230V, electronic, complete, all as specified and as directed by Engineer-in-Charge.

Taking down carefully copper/ aluminium point wiring (Light, fan, socket or power) compete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc for credit

Material and labour for Point wiring for one light point/fan point/exhaust fan point controlled by one way 5 Amp switch complete with 2 runs of 1.5 sqmm PVC insulated, unsheathed FRLS cable 1100 volts grade, multi stranded copper conductor drawn in existing PVC conduit in wall/ roof etc. and including provision of one run of PVC insulated 1.5 sqmm copper conductor for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6mm thick MS sheet concealed in wall and laminated sheet cover of 3mm thick on top for housing the switches, fan regulator, socket, outlets etc complete all as specified and directed. Make :- Polycab / Havells / Finolex.

All as per Serial item No 31 here-in-above, but in same board; with other switches; for 5 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as specified and as directed by Engineer-in-Charge.

All as per Serial item No 31 here-in-above, but for 5 Amp switch socket on independent board; with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as specified and as directed by Engineer-in-Charge.

All as per Serial Item No 31 here-in-above, but size of cable 2.5 sq mm for 15 Amp switch socket with earth wire 1.5 sq mm PVC insulated multistranded copper conductor cable all as specified and as directed by Engineer-in-Charge.

Taking down the old burnt / unserviceable sub main wiring, providing material and labour for new sub main wiring with 2 run of single core 4 Sqmm PVC unsheathed multistranded copper conductor drawing into existing PVC Conduit, one run of copper earth conductor of 4 sq mm complete all as specified and as directed by Engineer-in-Charge. Note: 2 runs of main copper conductor and 1 run of earth conductor will be measured as 1 unit of length

Taking down the old burnt / unserviceable sub main wiring, providing material and labour for new sub main wiring with 2 run of single core 4 Sqmm PVC unsheathed multistranded copper conductor drawing into existing PVC Conduit, one run of copper earth conductor of 2.5 sq mm complete all as specified and as directed by Engineer-in-Charge. Note: 2 runs of main copper conductor and 1 run of earth conductor will be measured as 1 unit of length

Taking down the old burnt / unserviceable sub main wiring, providing material and labour for new sub main wiring with 2 run of single core 10 Sqmm PVC unsheathed multistranded copper conductor drawing into existing PVC Conduit, one run of copper earth conductor of 6 sq mm complete all as specified and as directed by Engineer-in-Charge. Note: 2 runs of main copper conductor and 1 run of earth conductor will be measured as 1 unit of length

Supply and fix, 1200 mm in long, 20/22 W LED Surface mounted, batten fixture with powder coated pressure dia cast aluminium housing and translucent diffuser, having multichip on board LED metal clad PCB and dedicated heat shrink with minimum lumens output not less than 1450 lumens, & surge protection of minimum 2 Kv input current <200mA, THD<10 % and CCT between 5000 k to 6500 K, including taking down existing unserviceable light fitting complete all as specified and as directed.

Supply and fix, 600 mm in long, 10/12 W LED Surface mounted, batten fixture with powder coated pressure dia cast aluminium housing and translucent diffuser, having multichip on board LED metal clad PCB and dedicated heat shrink with minimum lumens output not less than 1450 lumens, & surge protection of minimum 2 Kv input current <200mA, THD<10 % and CCT between 5000 k to 6500 K, including taking down existing unserviceable light fitting complete all as specified and as directed.

S & F in replacement, new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium bldg security light luminaries with high power LED as light source of power 25 W, IP 66, system luminous efficacy >85 Lm/W, life 50,000 hrs, surge protection 10 kV and zero maintenance including all light fittings etc., connecting from ceiling rose to light fitting with and including three core 1.5 sqmm copper conductor cable complete all as specified and as directed.

Disconnection & taking down unserviceable GI bracket of 40mm dia from the pole / building, providing material and labour, for street light bracket made out of 40 mm dia GI tubing, medium grade upto 1.5 mtr long; including bending, welding, drilling holes as required and fixing with flat iron clamps 50 mm x 6 mm thick (02 Nos) with suitable nut, bolts and washers to steel tubular /concrete poles complete, including preparation of steel and iron surface and applying two coats of aluminium paint of first quality, over a coat of primer, etc complete, all as specified and as directed. Make of GI Pipe:- Jindal / Zenith / Prakash. Make of paint:- Asian / Berger / Jenson & Nicholson.

om sai enterprises (BID ID -3228764)

M/s.Santosh Kotarki (BID ID -3226301)

Satish Patpally (BID ID -3230383)