NIT NO.16, Item No.07 (2019-20)WW-II

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR No. 1.10 Make of wire:-Grandlay/Fort Gloster/Universal Group C DSR No. 1.10.3

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR No. 1.14 Make of wire:-Grandlay/Fort Gloster/Universal 2 X 4 sq. mm + 1 X 4 sq. mm earth wire DSR No. 1.14.3

4 X 16 sq. mm + 2 X 6 sq. mm earth wire DSR No. 1.14.11

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. DSR No. 1.21 25 mm DSR No. 1.21.2

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR No. 1.25

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. DSR No. 1.31

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. DSR No. 1.32

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. DSR No. 1.33

Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR No. 1.34

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR No. 1.50 Upto 450 mm sweep DSR No. 1.50.1

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. DSR No. 1.51

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). DSR No. 2.3 12 way , Double door DSR No. 2.3.3

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) DSR No. 2.4 4 way (4 + 12), Double door DSR No. 2.4.1

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR No. 2.10 Make :L&T/Siemens/MDS Single pole DSR No. 2.10.1

Double Pole DSR No. 2.10.3

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR No. 2.13 100 A DSR No. 2.13.3

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR No. 2.15 63 A DSR No. 2.15.3

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. DSR No. 2.2 200 A,36KA,FPMCCB DSR No. 2.2.15

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR No. 2.18

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. DSR No. 2.20

LED Perforation 2X2 Tile 36W, modern design enabled by advanced LED light. It blends into ceiling plane and maintains uniform luminance across aperture to enhance visual comfort. Make: Philips/Bajaj/Crompton/Havells

Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack.

GOGIA BROTHERS

HYDROCON ENGINEERS