REPAIR/ REPLACEMENT OF STREET LIGHT, UG CABLE, DG SETS, CONNECTED WORKS INCLUDING REPAIR ALUMINIUM WIRING TO COPPER WIRING WITH FITTING FIXTURE, DBs AND FAN SUMMER / WINTER APPLIANCE AT MIL STN BANBASA UNDER GE PITHORAGARH

Amount

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation of pole/ stay/ strut, filling and mass cocrete etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in cills, copings, pole pedestals, plinth courses and the like including necessary form work, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m in depth for foundations of poles/stay/struts etc, trenches for laying of cables and the like not exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) at a distance n.exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

M&L for providing dry sand as in cushioning to underground cable including punning down of sand in layers complete all as specified and directed.

Supply and laying old size sub class 'B' brick burnt clay bricks laid dry and flat abutting each other with width equal to length of the brick and gap between adjacent brick under UG cable complete all as specified and directed.

Pruning / trimming of tree branches not more than 100 mm dia surrounding 3.0 mtr wide all around the LT/HT overhead line, cleaning the site and removing the cutted branches outside MD land complete all as specified and directed.

Disconnecting and taking out LT OH line conductor with GI earth wire of any size fixed on existing cross arms by loosing the binding wire from the insulator where ever necessary and refixing /restraining, securing, tightening including cutting the tree branches, obstacle to the OH lines (approx 3.00 metres clearance all around the outer conductor) and bushes on ground in each span n.exc 35 m (average) for three phase and neutral with street light feeder and GI guard wire complete all as specified and directed.

All as per Sr item No. 9 above but for three phase and neutral with GI guard wire.

All as per Sr item No. 9 above but for one phase and neutral with GI guard wire.

All as per Sr item No. 9 above but for HT three phase with GI guard wire.

S&F galvanized steel stay assembly complete with stay rod 20mm dia including stay wire 7/ 3.15 mm fixed for stay of poles including necessary MS clamp of flat iron 50x6mm, nuts & bolts etc complete including dismantling of stay assembly from site and making good as per existing complete all as specified and directed.

Dismantling of old rusted cross arms etc and S&F cross arms, bracings, supports, clamps, back plates etc, fabricated from structural steel section including bolts, nuts, washers, welding, bending to shape, drilling holes etc and painted with two coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of old unserviceable shackle type and S&F shackle type porcelain vitreous white/ brown/ green insulator of size 75mm height and 90mm dia, suitable for 1100 Volt grade including galvanized mild steel straps of size 31x3 mm, washers, 12mm dia of bolts and nuts etc complete all as specified and directed.

Dismantling of old unserviceable air break gang operated switch vertically mount and S&F triple pole mechanically operated, mounted on insulator & steel frame and operating mechanism from ground level for current rating upto 200 amps of 11 KV complete all as specified and directed.

M&L for preparation of old painted surfaces of existing steel swaged pole and applying one coat of aluminium paint starting from 1.5m above the top of PCC pedestal complete all as specified and directed.

Dismantling old ACSR conductor service feeder distribution span and S&F ACSR conductor of any type and size straching properly on insulators and binding with aluminium binding wires, jumpers including fixing on insulators on each pole in span and tightening with permissible sag in between span etc complete all as specified and directed.

Dismantling of old unserviceable pin type insulator and S&F pin type porcelain, vitreous white/ brown/ green insulator of size 150mm height and 150mm dia for 11000 volt grade including one galvanized mild steel spindle and two galvanized iron washers and nut etc complete all as specified and directed.

Dismantling of old unserviceable disc type insulator and S&F disc type insulator, porcelain, vitreous 145mm high and 255mm dia ball and socket type, white, brown or green Single disc assembly assembly for tension with tension clamps for conductors, working pressure 11000 volts complete all as specified and directed.

S&F cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.

S&F cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed.

Opening up the top cover of transformer and taking out the transformer oil in a separate container after disconnecting the HT/LT side electric connections from both the primary & secondary side of the transformer of any type/description (indoor/ outdoor type) installed on pole/ floor, for carrying out necessary repair/ rewinding to HT/LT side after shifting the transformer to contractors work shop including taking out complete core assembly, Megger the defective winding portion/ taking out, cleaning the laminated core and rewinding with appropriate guage/ winding wire/ strip winding of existing, description for transformer of capacity 50 to 125 KVA/ including assembling & testing on completion & installation the same at the site complete all as specified and directed. Note: - 1. Winding of coil shall be measured and paid separately under respective item. 2. Transportation charges are inclusive in the quoted rates. 3. The cost for the dehydration of transformer oil if required shall be measured and paid separately. 4. The cost of insulation material such as paper, cotton tape, lathered sheet, cork sheet etc are inclusive in the coated rates.

All as per Item No 23 here-in-before but capacity 150 to 320 KVA.

Supply only copper winding wire of any size/ description suitable for step down transformer of any capacity, including winding of coils (HT) as per the manufactures design & specification to obtain rated KVA complete all as specified and directed.

All as per item No 25 above but for strip winding for LT side.

S&F HV bushing 11 KV grade with brass spindle 4 Nos hexagonal nut suitable for transformer capacity 75 KVA/100KVA, required for transformer complete all as specified and directed.

S&F LV bushing 1100 volt grade with brass spindle and 04 Nos hexagonal suitable for transformer capacity 75 KVA, required for transformer complete all as specified and directed.

Supply and filling up silicagel in breather of diffrent capacity of transformer complete all as specified and directed.

M&L for air breather assembly complete with fresh blue colour silica Gel suitable for indoor/ outdoor transformer complete all as specified and directed.

M&L for temparature guage 0 to 125 degree C with transformer installed at site with all accessories complete all as specified and directed.

S&F MCCB, 4 pole, 415 V, adjustable type, 200Amp, 36 KA complete all as specified and directed.

S&F MCCB, 4 pole, 415 V, adjustable type, 160 Amp, 36 KA complete all as specified and directed.

S&F MCCB, 4 pole, 415 V, adjustable type, 400 Amp, 50 KA complete all as specified and directed.

Taking down existing unserviceable Volt Meter and S&F Volt meter (0-500V), 3 phase, 415 volt complete all as specified and directed.

Taking down existing unserviceable Amp Meter and S&F Amp meter of 0-200 Amps with CTs complete all as specified and directed.

Supply and replacing/ topping up of transformer oil with new transformer oil (ISI Marked) duly centrifuged and tested for dielectric strength not below from 45 to 60 KV in transformer complete all as specified and directed.

Dehydration, centrifuging, filtration, cleaning and drying the wetness of transformer oil to bring the electric strength as required in transformer outdoor/ indoor type 11/ 433 KV at different locations at Banbasa Mil Camp area by dehydration plant having minimum capacity 60 ltr per hr including testing of oil before and after dehydration / filtration for each equipment for satisfaction performance complete all as specified and directed.

M&L for painting of transformer 11 KV, 415 V (50 to 200 KVA) indoor / outdoor type installed at 4 pole structure or on floor including cleaning, scrapping of exposed surfaces and painting with one coat of synthetic enamel paint of approved shade with spray machine including writing MES No. and Machine No. with black paint with letter size 15 mm wide and 50 mm long complete all as specified and directed.

Maintenance and complete overhauling of 11 KV VCB of existing make/ type/ mode/ capacity including disassembling of operating mechanism parts well cleaning with petrol and CRC-226 and replacing unserviceable spare parts reassembling of parts including well cleaning the complete panel board, main bus bar, decarbonizing all joints bus bar CTS,PTS, spouts metal parts and making VCB perfect operating in manual and electric mode and calibration & checking of tripping system of 11 KV circuit breaker through IDMT over current and earth fault relay at plug setting infected in service by primary current injection method to ensure proper function of trip coil control circuit etc. during fault condition setting by expert from authorised agency of state electricity board including submission of calibration certificate complete all as specified and directed.

M&L for earthing complete with galvanised or steel earth plate electrode of size 60cm x60cmx6mm thick burried directly in ground vertically ( to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to strip 32x 6 mm size with nuts, bolts , check nuts , washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wire mesh all as shown in electrical plate No. 5 of SSR -1991 Part I and connecting to arthing test point, main switch board and testing on completion including PCC chamber concrete 1:3:6 type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete(1:2:4) type B-1 all as shown in electrical plate in No 5 of SSR(Pt-I)1991 complete all as specified and directed.

S&F contactor MNX 40 of existing make/model suitable for street light timer including dismantling existing un serviceable from the timer assembly and making reconnection connection complete all as specified and directed.

S&F timer digital type suitable for street light timer including dismantling existing unserviceable from the timer assembly and making reconnection connection complete all as specified and directed.

S&F of Integral LED street light driver, enclosed with glass cover frame suitable for existing make/ models of LED street light/ flood lights of capacity 25/30 W complete all as specified and directed.

S&F of integral LED street light driver, enclosed with glass cover frame suitable for existing make models of LED street lights/ flood lights having capacity 40/ 45/ 48/ 50 W complete all as specified and directed.

S&F of integral LED street light driver, enclosed with glass cover frame suitable for existing make/models of LED street light/ flood lights of capacity 60/ 65/ 70/ 72/ 80/ 90 W complete all as specified and directed.

S&F of integral LED street light module with complete PCB and LED bulb suitable for 25/ 30 W LED street light for existing make and model complete all as specified and directed.

S&F of integral LED street light module with complete PCB and LED bulb suitable for 40/ 45/ 48/ 50 W LED street light/ flood lights for existing make and model complete all as specified and directed.

S&F of integral LED street light module with complete PCB and LED bulb suitable for 60/ 65/ 70/ 72/ 80/ 90 W LED street light/flood lights for existing make and model complete all as specified and directed.

S&F street light bracket made out of 40 mm dia GI pipe light grade of length upto 1.5 mtr bent to shape required with and including 2 Nos, 50 x 6 mm MS flat iron clamps with nuts, bolts, washer etc and applying one coat of aluminium paint to clamps including dismantling of old brackets complete all as specified and directed.

M&L for in replacement of bus bar chamber, fixed on wall, 4 ways, 200 Amps ,415 V powder coated, water & vermin proof, IP-66 protection duly provided with front openable door including provision of TPN copper bus bar heat shrinkable colored PVC sleeve coated for phase and neutral complete all as specified and directed.

M&L for in replacement of bus bar chamber, fixed on wall, 4 ways, 100 Amps ,415 V powder coated, water & vermin proof, IP-66 protection duly provided with front openable door including provision of TPN copper bus bar heat shrinkable colored PVC sleeve coated for phase and neutral complete all as specified and directed.

S&F of PVC LT OH line spacer for 5 wires complete all as specified and directed.

S&F of PVC LT OH line spacer for 4 wires complete all as specified and directed.

S&F of PVC LT OH line spacer for 2 wires complete all as specified and directed.

Clearing away all grass vegetation, saplings, shrubs, brush wood undergrowth roots and trees not exceeding 30 CM girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance soft/loose soil and getting out including spreading of anti-vegetation chemical on complete Area complete all as specified and directed.

S&F copper lugs of size 95 to 150 Sqmm complete all as specified and directed.

S&F copper lugs of size 70 sqmm complete all as specified and directed.

S&F copper lugs of size 50 sqmm complete all as specified and directed.

S&F copper lugs of size 35 sqmm complete all as specified and directed.

S&F in repair battery 12 Volt 120 AH complete all as specified and directed.

Disconnecting GOD of capacity 11 KV, dismantling of GOD for complete repair & overhauling, checking the serviceability of spares & operating mechanism, replacement of defective/worn out spares for making the GOD functional including operating mechanism, oiling, greasing of moving parts, fine setting of mechanism making the GOD perfect operational in manual mode complete all as specified and directed. Note: - New spare parts replaced shall be measured and paid for separately under respective items of Schedule ‘A’.

S&F 11 KV post type insulator complete all as specified and directed.

M&L for preparation of old painted surface of two pole structure made of steel tubular pole of 11 mtrs long including protection pipes, cross arms, clamps, climbing devices, etc. and applying one coat of aluminium paint on all the metallic surfaces complete all as specified and directed.

M&L for prepartion of old painted surface of four pole structure made of steel tubular pole of 11 mtrs long including protection pipes, cross arms, clamps, climbing devices, etc. and applying one coat of aluminium paint on all the metallic surfaces complete all as specified and directed.

M&L for repair of burnt/ perished cable ends on incoming and outgoing feeders of panel equipment and other machinery including cutting of burnt ends, preparing/dressing of cable ends with 50 sqmm cable lugs complete all as specified and directed.

M&L for repair of burnt/ perished cable ends on incoming and outgoing feeders of panel equipment and other machinery including cutting of burnt ends, preparing/dressing of cable ends with 70 sqmm cable lugs complete all as specified and directed.

M&L for repair of burnt/ perished cable ends on incoming and outgoing feeders of panel equipment and other machinery including cutting of burnt ends, preparing/dressing of cable ends with 95 to 150 sqmm sqmm cable lugs complete all as specified and directed.

Supply only tinned copper fuse wire 16 amp complete all as specified and directed.

Supply only tinned copper fuse wire 20 Amp complete all as specified and directed.

Supply only tinned copper fuse wire 25 amp complete all as specified and directed.

Taking down existing 25 to 45 watts LED street light fitting any type from old poles, de-assembling, testing of parts for serviceability, sorting serviceable and unserviceable parts, replacing unserviceable parts, re-assembling using new accessories including S&F new copper wire 3 core 1.5 sqmm of suitable size of making internal connections, testing and re-fixing in position complete all as specified and directed. Note: - New spare parts replaced shall be measured and paid for separately under respective items of Schedule ‘A’.

S&F of street light panel 6 KW load with digital 24 hr timer with contactor 32Amp/TP along with MCB 40 Amp , SPN complete all as specified and directed.

S&F GI Pipe 40 mm dia light grade for protection of cable complete all as specified and directed.

S&F GI Pipe 80 mm dia light grade for protection of cable complete all as specified and directed.

Relaying of serviceable LT cable obtained of any size and description complete all as specified and directed.

S&F, laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sqmm, 3 core complete all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core complete all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3½ core core all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3½ core core all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3½ core core all as specified and directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sqmm 3½ core core all as specified and directed.

Supply, installing steel tubular swaged poles type 410-SP-31 (9 mtr long)complete with cast iron base plateof size 30cmx30cmx6mm thick, welded at bottom and cap finial taper plug, bolts, nuts & screws as specified and fixed in true vertical position complete and poles shall be painted with two coats of black bituminous paint throughout internally, and externally upto planting depth. The remaining portion of the exterior surface shall be painted with two coats of aluminium paint over a coat of red oxide primer including dismantling of unserviceabl existing pole by breaking PCC coping and making good as existing ground from site complete all as specified and directed.

Supplying and laying synthetic Rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all as specified and directed.

S&F danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 20x25cm size complete all as specified and directed.

S&F danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed.

S&F LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F CO2 fire extinguisher portable dry powder type -5kg capacity complete all as specified and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc, removing materials to store for keeping in safe custody or for taking credit as per schedule and making good disturbed surfaces of walls, floors, ceiling etc to match the existing surfaces complete all as specified and directed.

Taking down carefully by disconnecting electrical connection, main switches / distribution board / MCB DB with MCBs of any rating, removing dismantled material from site and making good disturbed surface of walls to match with existing complete all as specified and directed.

Dismantling and taking out sub main wiring/ service wire/ UG cable of any size and taking out from site complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multi- stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade IS-694 (ISI marked) drawn through and including PVC conduit heavy duty 20/25 mm dia and all necessary fittings accessories fixed concealed in walls/ceiling etc including shunk type pressed steel terminal boxes with 3.00 mm thick insulated laminated sheet / hylem top covers and 1.5 Sqmm PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded copper conductors earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for the following :- Note:- Cutting chases in walls/ceiling to conceal the conduits etc and making good to match the existing surfaces is included in unit rate. (a) One light / fan / exhaust/ bell point controlled by one, one way switch 6 Amps.

All as per item No 97 but herein before One 6 Amps socket outlet on the independent board.

All as per item No 97 but herein before One 6 Amps socket outlet on the same board with other switches.

All as per item No. 97 here-in-before but point wiring with 2.50 Sqmm single core multi- stranded copper conductor cable FRLS and 2.5 Sqmm PVC insulated and unsheathed FRLS cable conductor 1100 volts grade with multi- stranded copper conductor as earth wire for one 3/5 pin, 15/16 Amps switch socket combination point on independent board.

S&F in repair switch piano flush button single pole one way 6 Amps complete all as specified and directed.

S&F in repair socket outlet 3 pin 5 Amps flush type complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 15 Amps flush type complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type universal complete all as specified and directed.

S&F ceiling rose 3 terminal/ PVC/ Polycarbonate, isolated body complete all as specified and directed.

S&F in repair switch bell push flush type suitable for bell one way 5/6 Amps complete all as specified and directed.

S&F LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED bulb 12W, 5 star rated voltage 220-240, 50 Hz, CDL 1200 lumen B22 base type for batten/angular lamp holder complete all as specified and directed.

S&F in replacement LED bulb 7 W in built voltage surge protection upto 3.5 KV, Cool day light 665 Lumen B22 base type for batten/angular lamp holder complete all as specified and directed.

S&F in replacement five stepped 120 W electronic fan regulator flush type unbreakble rotary switch on existing laminated sheet including necessary connection complete all as specified and directed.

S&F in replacement electronic bell Ding Dong , AC 230 Volt, single pole complete all as specified and directed.

S&F in replacement sheet metal enclosure double door for DB, SPN 8 way with 200 amps rated bus bar, 240 volts, suitable for housing MCB`s complete all as specified and directed.

S&F in replacement MCB SPN, 240 Volts, 40 Amps, 10KA ‘B’ series complete all as specified and directed.

S&F MCB SP, 240 volts, 40 Amps, 10 KA ‘B’ series complete all as specified and directed.

S&F MCB SP, 240 volts, 63 Amps, 10 KA ‘B’ series complete all as specified and directed.

S&F lamp holder PVC/ Polycarbonate with metal ring for fixing of B22 base lamp with back plate suitable for batten fittings complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x6.0 mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0mm dia Protedcted by light GI Pipe 20 mm dia and 15 dia med grade for watering pipe and connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, iron funnel,Iron pit cover and chamber all as shown in electrical plate No. 3 connected to earthing test point including testing on completion complete all as specified and directed.

S&F wiring for circuit/ sub main wiring with two single run of 6 Sqmm single core unsheathed PVC insulated fire retardant (FR) cable, 1100 volts grade multi stranded copper conductor drawn through in & including PVC conduit of 25 mm or higher dia including all necessary conduit accessories, surface type/recessed type including one run of 4 Sqmm stranded copper conductor PVC insulated fire retardant (FR) cable as earth wire connected to common earth dolly, complete all as specified and directed.

Supply only PVC tape 20 mm wide in 25 Mtr long roll complete all as specified and directed.

M&L for flushing the line by CTC and connecting the unit complete, repairing the leaking tube/ lines by brazing and charging the unit with compressor oil and refrigerator gas to its full capacity, commissioning and testing for its smooth functioning all as specified and directed

S&F neoprene door gasket of refrigerator of any make and capacity including re-alignment of door complete all as specified and directed.

S&F thermostat switch suitable for refrigerator of any capacity and make complete all as specified and directed.

S&F relay assembly suitable for refrigerator of any size and make compelete all as specified and directed

S&F door for freezer suitable for refrigerator and capacity 310/ 300/ 286 litres complete all as specified and directed.

S&F glass cover for vegetable tray of any size for 165/ 286/ 300/ 310 ltrs capacity refrigerator complete all as specified and directed

S&F lamp holder suitable for 15 watt bulbs screw/ pin type complete all as specified and directed

S&F electric bulb 250 Volts 15 watts screw / pin type as required and capacity of refrigerators complete all as specified and directed.

S&F chiller tray of refrigerator of capacity 310/ 300/ 286 litres complete all as specified and directed.

M&L over load protector suitable for refrigerator and capacity complete all as specified and directed.

S&F compressor unit of refrigerator of capacity of 286/ 310 litres complete all as specified and directed.

S&F ice cube tray complete all as specified and directed.

S&F condensor of refrigerator of suitable for refrigerator of capacity 286/ 310 litres complete all as specified and directed.

M&L for denting brazing, replacement of bottom rusted parts by welding MS sheet of existing suitable thickness with and including replacement of door handle, scraping out old paint by burning and then applying spray painting with two coats of synthetic enamel paint over a coat of red oxide primer of approved make/colour over compressor and body of the refrigerator including preparation of surfaces complete all as specified and directed.

M&L for servicing, cleaning indoor & outdoor unit, flushing the complete refrigerating system with CTC from Split/ window AC from the leaking pipe lines by brazing and charging the unit with compressor oil and refrigerator gas to its full capacity after evacuating and cleaning the complete system installing commissioning and testing for its smooth functioning for 72 Hrs on load complete all as specified and directed.

S&F outer cabinbet for 1.5 ton window/ split AC with louver vents and back grill of suitable size complete all as specified and directed.

S&F relay of suitable size for 1.5 Ton capaicty window/ Split type AC of any make complete all as specified and directed.

S&F thermostat switch of suitable size for window/ split type AC 1.5 Ton capcity of any make and capacity complete all as specified and directed.

S&F air/ dust filter suitable for 2.5/2.0/1.5 Ton capacity split/ window type AC of any make complete all as specified and directed.

S&F running capacitor suitable for 1.5 Ton capacity window /Split type AC of any make complete all as specified and directed.

S&F over load protector for 2.5/ 2.0/ 1.5 Ton capacity window/ split type AC of any make complete all as specified and directed.

S&F condensor coil for 1.5 ton window/ split AC complete all as specified and directed.

S&F strainer with capillary tube for 1.5 ton window/ split AC complete all as specified and directed.

S&F multi circuit evaporator with coil, suction header and suction line with accumulator suitable for 1.5 ton window/dplit AC complete all as specified and directed.

S&F inner housing with insulation pad suitable for 1.5 ton window/ split AC complete all as specified and directed.

S&F base tray with insulation pad suitable for 1.5 ton window/split AC complete all as specified and directed.

S&F condensor fan blade with ring suitable for 1.5 ton window/ split AC complete all as specified and directed.

M&L for shifting of split AC after disconnecting all electric connections, dismounting the indoor and outdoor unit, disconneting all pipe connections and reinstall the same in another location with all accessories and electric connections as per requirement and complete all as specified and directed.

S&F swing motor with deflector suitable for 1.5/1.0 Ton capacity Split/ window type AC of any make complete all as specified and directed

S&F starting capacitor of required MDF suitable for 2.5/ 2.0/ 1.5 Ton capacity split / window type AC of any make complete all as specified and directed.

S&F fan motor of Air Conditioner of 1.5/ 1.0 ton capacity for window/ split type of any make make complete all as specified and directed.

S&F blower motor blade suitable for 1.5/1.0 Ton capacity Split/ window type AC of any make complete all as specified and directed

S&F capacitor of required MDF suitable for blower motor of AC of any make & type complete all as specified and directed

S&F compressor unit for AC 1.5 Ton capacity single phase 240 Volts complete all as specified and directed.

S&F front grill assembly of existing size for window type AC of 1.5 ton capacity complete all as specified and directed

Taking out sealed compressor unit water cooler of any make, storage capacity 120 litres and cooling capacity 60 litres per hour from the machine, cutting the dome and overhauling of the water cooler and replacement of unserviceable parts, rewinding the stator with suitable size super enameled copper winding wire using the best quality insulating material, re-assembling the unit, welding the dome after complete repairs, installing the unit with machine, charging with compressor oil and refrigerator gas to its full capacity, installing the machine at site and testing on full load for its smooth functioning complete all as specified and directed. Note :- New parts replaced shall be measured and paid separately under respective items

All as per Item No 161 here-in-before but storage capacity of water cooler 80 litres and cooling capacity 40 litres per hour.

M&L for flushing out the complete system by CTC, repairing the leaking pipe joint by brazing and charging the unit with compressor oil and refrigerator gas after evacuating and flushing of water cooler having 120 litres storage capacity and 60 litres cooling capacity of any make complete all as specified and directed.

All as per Item No 163 here-in-before but storage capacity of water cooler 80 litres and cooling capacity 40 litres.

S&F running capacitor of required MDF suitable for water cooler of any make and capacity complete all as specified and directed.

S&F starting capacitor of required MDF suitable for water cooler of any make and capacity complete all as specified and directed.

S&F kit relay assembly suitable for water cooler of any make and cpacity complete all as specified and directed.

S&F over load protector suitable for water cooler of any make and capacity complete all as specified and directed

S&F float valve with copper ball and brass plunger, suitable for 15mm nominal bore pipe to withstand supply line pressure complete all as specified and directed.

S&F rewinding of motor of water cooler of 120 litres storage capacity with suitable size copper super enameled wire complete all as specified and directed.

S&F rewinding of motor of water cooler of 80 litres storage capacity with suitable size copper super enameled wire complete all as specified and directed.

S&F PVC connection with brass flare nuts internally threaded, 600mm long suitable for 15mm nominal bore pipe complete all as specified and directed.

S&F renewal of main cord cable PVC insulated 40/0076, 3 core multistranded copper cable 3 RM long 230 Volts grade, complete all as specdified and directed.

S&F compressor unit of water cooler having cooling capacity 80 litres per hour of Kriloskar make all as specified and directed.

S&F compressor unit of water cooler having cooling capacity 60 litres per hour of Kriloskar make all as specified and directed.

S&F fan motor of water cooler having cooling capactiy 80 litres per hour complete all as specified and directed.

S&F fan motor of water cooler having cooling capacity 60 Litres per hour complete all as specified and directed.

S&F air coil condensor for water cooler having cooling capaicty 60/80 Liters per hour complete all as specified and directed.

S&F push cock cast bronze alloy screwed down extenally suitable for 15mm nominal bore pipe complete all as specified and directed.

M&L for repair of body of water coolers of any make/capacity by welding MS sheet not less than 1.6 mm thick to match with existing after removing old rusted/unserviceable portion inclduing replacement of old nuts, bolts screws, hinges of top cover and providing thermal insulating material such as thermocol etc as per site requirement complete all as directed and specified.

M&L for denting, putty filling, burning out old paint and applying spray painting with two coats of synthetic enamelled paint after preparation of surfaces of water cooler 120 /80 ltrs capacity complete all as specified and directed.

M&L for over hauling of desert cooler of any make and any size including replacement of worn out perished copper conductor wiring of required size,PVC rubber pads for fans motor,Iron frame for motor, PVC water distributor pipe and its fittings like bends,Tee complete all as specified and directed.

S&F capacitor 4 MDF suitable for desert cooler of any make and size all as specified and directed.

S&F plastic outer body for medium size desert cooler 2 mm thick including side panels, water tank and front grill complete all as specified and directed.

S&F wood wool pad (set of three, weight not less than 200 gram of each pad of size 18" x 22") for desert cooler of any size and capacity complete all as specified and directed.

M&L for preparing old steel surfaces of desert cooler (internally and exteranally) and applying two coats of synthetic enamel paint (water proof) with sprayer complete all as specified and directed.

S&F main cord cable PVC insulated 23/0076, 3 core multistranded copper conductor suitable for 1100 Volts grade, complete all as specified and directed.

S&F fan blade for suitable size, complete all as specified and as directed.

S&F desert cooler fan motor copper wound of suitable size 230 Volts, 50Hz, three speed including fan blade complete all as specified and directed

S&F desert cooler water lifting pump with 1/6 HP electric motor 230 Volts 50 Hz complete all as specified and directed.

S&F in replacement plug top 5 Amps, 3 pin AC, SP, 230 Volts complete all as specified and directed

Taking down ceiling fans of any sweep and any make from fan hooks by disconnecting electric connection, opening up for examination, replacing of defective/ unserviceable parts, cleaning externally and internally, providing fresh oil and grease as required, re-assembling and re-hanging in original location, cleaning & re-fixing of blades, making electric connections and testing etc complete all as specified and directed. Note:- New parts replaced shall be measured and paid for separately at supply only rates.

M&L for dismantling of ceiling fan of 1200 mm sweep, cutting of existing worn out winding, cleaning the slots and rewinding with super enameled copper wire of existing guage, varnishing, re-assembling and testing all at site for RPM complete all as specified and directed.

S&F ball bearing of number 6201 /6202/ 6203/ 6204 complete all as specified and directed.

S&F capacitor 2.5 MDF complete all as specified and directed.

S&F mild steel down rod 15 mm NB, heavy grade 300 mm long duly painted white complete all as specified and directed.

S&F rubber reel insulator with nuts, bolts, clamps and split pin as required of different sizes to match with the existing size complete all as specified and directed.

S&F rotor suitable for 1200 mm sweep Ceiling fan all as specified and directed.

S&F stator suitable for 1200 mm sweep Ceiling fan all as specified and directed.

S&F top and bottom canopy of ceiling fan of any make & sweep including screws and nuts complete all as specified and directed.

S&F ceiling fan blades, 1200 mm sweep suitable for complete all as specified and directed.

S&F PVC connector block of suitable size for ceiling fan all as specified and directed.

S&F flexible cable 3 core multistranded copper conductor of size 1.00 Sqmm and making connection complete all as specified and directed.

M&L for preparing old painted surfaces of exhaust fan of any size & make including blades and applying a coat of synthetic enamel paint (smoke grey) with spray machine complete all as specified and directed.

Taking down exhaust fan of any size & make from wall by disconnecting electric connections, opening up for examination and replacing defective/unserviceable parts, cleaning, re-assembling and re-fixing in the same location after testing etc complete all as specified and directed. Note:- New parts replaced shall be measured and paid for separately.

S&F only condenser oil filled 4.0 MDF complete all as specified and directed

S&F ball bearing of suitable size of exhaust fans, complete all as specified and directed.

M&L for dismantling of exhaust fans of 250/ 300mm sweep, cutting existing burnt coils & cleaning the slots and rewinding with super enamelled copper wire of existing gauge, varnishing, re-assembling & testing complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 16 sqmm complete all as specified and directed.

Taking down non functional Geyser of 25/ 35/ 50 litres capacity from its location and inspection for replacement of worn out parts to make it functional complete all as specified and directed. Note :- Spare parts shall be measured and paid for separately as S&F under respective items.

S&F in repair indicator lamp red / green in colour, round or ractangular in shape and making connection complete all as specified and directed

S&F in replacement of geyser base plate assembly complete suitable for 25 litres capacity geyser complete all as specified and directed.

S&F stop valve 15 mm dia cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of existing Geyser complete all as specified and directed.

S&F heating element of 1.5 KW, Push/ Thread type, AC 220 Volts ISI marked for the geysers and connecting complete all as specified and directed.

S&F geyser thermostate, AC 220 Volts 35 degree to 90 degree capacity, ISI marked including making electrical connection to geyser complete all as specified and directed.

S&F in replacement of PVC insulated flexible cable, multi-stranded copper conductor, 4.0 Sqmm, 3 core cable complete all as specified and directed.

S&F in replacement plug top 15 Amps, 3 pin AC, SP, 230 Volts complete all as specified and directed.

S&F in replacement of glass wool of geysers complete all as specified and directed

S&F in repair PVC connection for hot water for geyser heavy duty 15mm bore, 450mm long with nuts & washers etc complete all as specified and directed.

Refixing of geyser of any capacity 25/ 35/ 50 ltrs by nuts & bolts of size 1/2" x 6" long-4 Nos grouting in wall by cement mortar 1:4 including electrical connection & water connection in same or other location after taking down the old one complete all as specified and directed.

S&F in repair 15 mm bore bib taps, cast copper alloy with cruch or butterfly habdle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15 mm bore galvanised iron tubes 'Medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F LED driver for 18W LED tube light fitting complete all as specified and directed.

S&F junction box of PVC type with hinged type door locking arrangement and two Nos suitable mounting clamp of white colour suitable to accomodate one 06 A MCB SP 230 V and incomming & outgoing two cable gland as per requirement size of cable with aluminium bus bar 04 Nos suitable size on insulator fitted in the box complete all as specified and directed.

shivam builders

KPELECTRICAL AND AUTOMATION

M/S HINA ELECTRICALS

shahji contractors