Annual maintenance of Administrative building and academic building in S.V.Vedic university, Tirupati for the year 2026-27

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead BRICK WORK

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead Un reinforced Cement Concrete up to 15Cms thick

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidengal, labour charges such as shoring, sheeting, planking,strutting etc., complete for finished item of work Ordinary soil-Manual means upto 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15cms, thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete

Supply of Quarry spall (M-008) / Gravel to site of work as directed during execution.

Cement Concrete (1:4:8) using 40 mm ( 0..54 Cum), 20mm (0.27 Cum) and 12 mm (0.90 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing,cost and conveyance of all materials etc., complete.

Cement Concrete C.C(1:3:6) using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non modular or traditional size) (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick brick partition walls in CM (1:4) using well burnt Bricks 2nd class or ground moulded ( Non- modular or traditional size) bricks ( 230 x 110 x 70 mm) including curing, cost and conveyance of all materials etc., complete

Plastering in Cement Mortar using best river sand including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete.

-do- in C.M(1:3) 12 mm thick

-do- in C.M(1:5) 12 mm thick

-do- in C.M(1:5) 20 mm thick

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 100 ml of Integral cement water proofing admixture complies with 15:2645- 2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mo(ar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Supply and placing of the M20 Design Mix 50mm thick pre cast slabs using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kg with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402) Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix if mixing is done by volume mixing.

- do- 50 mm thick

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of Stainless steel fly proof wire mesh of not less than 20 gauge

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of specified grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement below 36 mm Fe 415

Supply and fixing of 30mm thick Flush door shutters, solid bond wood block board type with commercial ply on both faces conforming to IS:2202 of standard make solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, including cost of screws etc., complete ( excluding cost of other fixtures which will be paid separately, but including labour charges for fixing the fixtures).

Providing and frxing 28 -30 MM thick solid Wood Polymer extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/cum. lt will be fixed to the frame using 3 inch /4 inch hinges. Minimum of 4 hinges will be required for fixing the door with the frame Composite (WPC) single.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Supply and fixing of 1.5 to 2 mm thickness PVC sheet for toilet doors including screws, Nails and etc., complete as directed during execution.

Supplying and fixing of netlon polymer mesh of rollable system (The prises of inclusive of materials stiching labour for fixing the mesh fabrication and instalating the mesh at site). Mesh Used:- Netlon insect screen Velevo:- 20 mm white colour Fabrication:- Netlon in sheet screening in cut to size of window started with velvo on three sides on the top screening fixed with screws firmly,stitan markers covered with nylon strap which also adds strength.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per lS 513 of 0.58 mm thick 'D' quality, galvanized as per lS 277 wilh Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm, section for mullion should be 46x70mm, section for beading should be 18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size should be 23x130mm. The partition should be panelled with gmm pre-laminated particie board to a height of 0.91m from the bottom, and remaining height with 5mm thick plain glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The sections are to be cut to length, metre joined with corner bracket Centre mullions are to be fixed uslng mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer (EPDlVl). Corner brackets made of CRCA with zinc phosphate. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for flnished item of work. do -- Fixed Partition with Door of approved make Outer frame section size of 46x52mm, mullion section should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter should be of 46x46mm and section for middle & bottom should be of size 23x130mm

supply of the Doors and window fixtures fixtures

Supply of Anodised Aluminium Aldrops Sliding Door Bolts 16mm x 250mm (3T-Pieces)

Supply of Anodised Aluminum tower bolt-with ISI mark IS :204 of 10 mm x 200 mm long

Supply of Anodised Aluminum tower bolt with ISI mark IS :204 of 10 mm x 150 mm long

Supply of Anodised Aluminum Door handles-with ISI mark IS :208 of 100 mm long

Supply of mild steel powder coated Butt hinges IS: 205 100 mm long

Door stoppers (MS Powder coated)

Supply of Brass fancy handles 150 mm

Supply of Brass Aldrop (IS:2681) 300 mm long

Supply of Brass Door Stoppers

Supply of Plain float glass of 4 mm thick including including all charges etc. complete.

Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic Door Closer (IS: 3564) with double speed adjustment with necessary accessories and screws etc. complete (Type-2: for width of doors 701 to 850 mm)

Finishing the sides of walls with Ist quality glazed wall tiles of following sizes of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls). (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supply of glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Flooring with Antiskid floor tiles 1st quality of all series & shades (as per manufacture specification), set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supply of Non-skid red or white full Supply of Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs

Flooring with cement concrete floor tiles of 25 mm thick confirming to IS 1380-12013/IS 1237-2012 of following sizes set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Plain cement concrete general purpose tiles conforming to IS:1237 using aggregates, cement, pigments of size 300 X 300 x 25 mm of any shades.

Flooring with vitrified tiles of 1st quality of following varieties of series and shades set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supply of soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between8-10 mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs.

Flooring with granite slabs set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

do - Tan brown Granite 18-20 mm thick upto 2.43 M

do -telephone Black Granite 18-20 mm thick upto 2.43 M

Painting priming coat with ready mixed Cement primer (water thinnable) for plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do- cement primer for interior grade - I for old work

Painting priming coat with ready mixed Cement primer (water thinnable) for plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do- cement primer for Exterior grade - II for old work

Painting with Ready mixed Synthetic Enamel paint in all shades - Grade -I having VOC (volatile organic compound) content less than 50 grams / ltre, approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- single coat for old wood work

-do- single coat for old plastered surface & old Iron work

Painting with Acrylic emulsion paint Exterior grade with silicon additives having VOC (volatile organic compounds) content less than 50 grms /ltr of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls. for single coat for old work.

Painting with Acrylic Emulsion paint interior grade having VOC (volatile organic compounds) content less than 50 grms /ltr of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for inernal walls. For single coat for old work.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness TCT), Coating: Alu- Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

22.20mm ODPipe - SDR 13.5

28.60mm ODPipe - SDR 13.5

34.90mm ODPipe - SDR 13.5

SYMET PILLAR COCK FANCY(ROMAN HANDLE)(CAT.NO:131-1) (15 mm) 1/2''size with roman handles,125 mm long and 131mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 125gms.

Supply of SYMET BIB COCK (CAT.NO:121) Standard 15mm size as per IS 9763 2000 with ISI mark male thread / Female thread with deluxe handles, 86 mm long and 102 mm high and 43 mm breadth 12mm seat dia and replaceable washers, having approx.weight of 90gms.

SYMET PUSH COCK (CAT.NO:139) 15mm with 1/2'' BSP (15MM) female threads 80mm long 30mm height and 30mm breadth having approximate weight of 47gms.

SYMET URINAL COCK (CAT.NO:140) 15mm with 1/2''BSP (15MM) female threads 80mm long 44mm height and 30mm breadth having approximate weight of 50gms.

Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality

Supply & Fixing of Round Jali Pipe connector ( without LIP ring)

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated

SYMET STOP COCK (CAT.NO:141): as per IS 9763-2000 with ISI mark 15 mm size with male thread deluxe handles,86 mm long and 90 mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 90gms.

S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 20 mm NB Size

Digital design, Supply and erection of flex sheet boards with back support of frame work made with 25mm x 25mm MS square pipe (light weight) to erect all the specified places as directed by the department. The cost is including all materials, labour for printing, erection at specified place including cost and conveyance of all materials, labour charges etc., complete as directed by the department .

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Hire charges for Supply and erection of digital design flex banner with required material like threads and sticks etc., to erect specified place as directed by the department. The cost is including material, labour for printing, erection and removal after completion of the function etc complete as directed during execution.

Providing Unplasticized PVC SWR Rain water downfall pipes for the following dia with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of '8' G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

--do-- 110 mm dia PVC pipe with wooden block of size 150mm x 50mm x 50mm

--do-- 75 mm dia PVC pipe with wooden block of size 100mm x 50mm x 50mm

Supplying and Fixing European Water Closet of 1st quality confirming to IS:2556-Part-2-1973 of white glazed with 'P' trap with ISI mark or equivalent brand approved by the department.

Supply and fixing of PVC low level system parry ware, slim line with internal components & short bend: 8 litres capacity single flush.

Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality confirming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block. Forsize of 550 x 400 mm with single C.P pillar cock.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm as directed during execution.

Supply and fixing CP Long body bib cock fancy type deluxe heavy duty 12.7mm dia Indian make 400 grams.

supply and fixing 12.7mm dia NP pillar cock heavy duty 1st quality Indian make (400 grams)

Supply and fixing wall Mixer with provision for over head shower and 115 mm long bend pipe with wall flange Jaquar make queen series with 7 years warranty. a) Chrome plated

Supply & fixing soap dish Jaquar make queen series: with 7 years warranty a) Chrome plated

Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years warranty a) Chrome plated

Supply & Fixing of Towel rod 24" Jaquar make Queen series Ivory gold colour with 7 years warranty

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of Jaquar Continental series, Chrome Finish with 7 years warranty.

Supply and fixing of 110mm dia 3M Single socket PVC /SWR pipe - 6kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand.

Supply and fixing of 75mm dia 3M Single socket PVC /SWR pipe - 6kg/sq.cm - Prince / Sudhakar / Kisan / Supreme or any ISI Brand.

Supply of 110mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 110mm dia - Door Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 110mm dia - Coupler - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75mm dia - Door Bend 87.5 Degree - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

Supply of 75 mm dia - Coupler - UPVC/SWR pipe fittings (Prince / Sudhakar / Kisan / Supreme or any ISI Brand)

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type .

do -- 50 mm NB Size

do -- 40 mm NB Size

do -- 32 mm NB Size

do -- 25 mm NB Size

supply and fixing towel rod (CP) of 24" long and 3/4" dia.

SPECIALISED INJECTION GROUTING WITH CEMENT AND FREE FLOW ADDITIVES: a) Drilling of holes with power drilling machine to the required depth [12mm to 14mm dia holes] b) Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty - Rapidstrong qs or equivalent. c) Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized Free flow, Non-shrink Grout additive - RAPIDSTRONG GROUT ADMIX (Armstrong ) /POWER n GROUT ADMIX (EBT) / CEBEX 100 (Fosroc )/ ZORIGROUT GP1 (PMCC) / SIKAGROUT ANCHKOR NSQ (Sika) /WATERSHIELD GROUT ADMIXi.e., 250 Grams per bag of 50 Kgs Cement add required water to make slurry form. d) After completion of grouting, Remove the Rubber nozzles e) Later sealing of the hole with polymer cement putty - ROOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM (EBT) / WATERSHIELD AR / Fosroc NITOBOND AR + Cement. * FOR STRENTHENING AND SEAL THE POROSITY OF THE CONCRETE TO ARREST THE LEAKAGES, DAMPNESS, LEAKAGES OF CONSTRUCTION JOINTS: (FOR TERRACE /CEILING / RCC RETAINING WALLS BASEDMENT FLOORINGS / WATER TANKS / RESERVOIRS / TOILETS etc.,)

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Hire charges for Tractor (for pulling) including all incidental charges etc. complete.

Supply of machinery in desilting works guide lines for engaging Excavator - loader JCB (Capcity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spotat his own costs 2. The Excavator - loader (JCB) should excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator - loader (JCB) should load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the JCB should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator - loader (JCB) should have the Tacho metre and it should function properly.

Supply of following labour required for maintenance work such as welding works, stone works, masonry works, carpentory works etc., and other emergency works as and when entrusted by the department during execution.

,-do- Masons / carpenters / stone cutters / plumbers / Painter - 2nd class

Man Mazdoors / women mazdoors