Up gradation/ face lifting of DIC building Baramulla including residential quarter of GM.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colors and shades, aid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colors and shades, aid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

Providing hoisting& fixing of budloo truss/purlin,rafter,post plate like component of different section including cost of secrew all complete job

P/F Track deck Grill make or equivalent zinc coated profiled sheets 1000 to 1020mm cover width 28-35 mm high crests at 250 to 255mm T.C.T (total coated thickness) high tensile S.M.P Galvalume steel. The sheets shall have wide panes with 3 No stiffing ribs, effective water shedding and special male/female ends with full return legs on side Lapps for purlins support and anti-capillary flute inside lapp. The sheets shall have a hot dip metallic coated of Zinc and aluminum (150gms/sm) zinc/ aluminum coated mass total on both sides AZ-150 as IS-1397.550 MPA yield stress. Providing silicon modified polyester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of S.M.P over micron polyester back coat over 5 micron primer coats on both surfaces including side and end lapp and using 8mm Galvalume. hex self-drilling fastener on each crest of sheet for connection with purloins and seam bolts at 300mm centers on all sides and end Lapps etc (measured for unit of laid area) 120’x60’[email protected]=9360sft=869.88sqm

P/F of 12mm thick commercial ply of approved brand on ceiling including cost of nails including cost of all fitting complete job. 60’x80’=4800sft

P/F of 12mm thick Nordic pine wall paneling (T&G) fully finished & four sides planned, fungus and Termite proof (seasoned moisture content 8% to 15% imported type ISO: 14001 approved including fixing with head less nails and inclusive all carriages, all taxes of allied material involved complete. Include cost of polishing.

Labour charges for fixing of available eves boarding 125rm

P/A of synthetic enamel paint of approved brand and manufacture to give an even shade one or two coats including Priming coat complete

P/F of sanitary fitting of standard/approved make make all complete job. A) Bib cock

Wall mixer