REPAIRS TO BOUNDARY WALL, DRAIN, FENCING COMPOUND WALL, HARDSTANDING AND FOOTHPATH AND ALLIED WORKS IN MD/OTM ACCN UNDER AGE B/R-II IN GE ROORKEE

Amount

Demolition of brick work built in cement mortar in any description and position complete all as specification and directed.

Dismantling Bricks (laid Flat in Floor or laid on Side Walls of Brick Drains, Channels), etc., Bricks laid, bedded and pointed in any Cement Mortar, complete all as specified and as directed.

Cleaning to Drain by taking out Brick Bats, Pebbles, Slits, Muds, Clay, Sludge etc from the bottom of Drains and culvert bed and removing to a distance not exc 50.00 Meter and depostied, complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, complete all as specified & as directed.

As per item No 4 above but except bricks.

M&L Brick work with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in cement mortar 1:4 complete all as specified & as directed.

M&L Brick Work with old size Sub-Class ‘B’ Bricks, laid on Edge as Side Walls of Brick Drains in Slope, Bedded and Jointed in Cement Mortar 1:6 and Pointed in Cement Mortar 1:3, complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls, /RCC walls surfaces etc including raking out joints, hacking for key, scrubbing down with water etc and removal and debris outside MoD land complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar 1:4 inside for fair face and outside wall of manhole of brick work/concrete surfaces finished even and smooth (With out using extra cement) removal and debris outside MoD land complete all as specified and directed

M&L for Preparing new plastered surfaces by washing, rubbing down and stopping of painted surfaces and applying two coat of cement base paint on surfaces of walls/ceilings over a coat alkali resistance primer complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for cesspit, manhole etc,and getting out in soft/loose soil even in foul position complete all as specified and directed.

Returning, filling in incl spreading levelling watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified & as directed.

Removing excavated materials n.exc 50m & depositing where directed at a level n.exc 1.5m above from starting point complete all as specified and directed.

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation of manholes etc complete all as specified and directed

S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints fixed to walls with and including all necessary fittings such as bend, tee, junctions, cowl etc, including takingdown old PVC/CI/RCC Pipe etc complete all as specified & as directed

all as per item No 15 above but for 75mm bore (dia).

S&F PVC (SWR) bends suitable for 110mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends suitable for 75mm bore pipe complete all as specified and directed.

Demolition of reinforced cement concrete as in cover slabs of manhole or septic tank, soak pit, RCC slab etc all as complete all as specified & as directed.

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in slab supprted on walls, beams, columns in floors, roofs, landings, culverts etc complete all as specified and directed.

Use & waste form work to sides and soffits of shelves etc including supports such as kitchen shelves, platforms and similar works rough finish surface of concrete (the thickness of slab/shelves n.exc. 100 mm) complete all as specified and directed.

M&L for RCC 1:2:4, type B1 (using 20mm graded aggregate) Precast cement concrete as in cover slab for man hole, or septic tank, soak pit, RCC slab etc and similar article with plain face. Set in cement mortar 1:4 complete all as specified & as directed.

S&F deformed or twisted TMT bar 8 mm dia cut to length, bent to shape required, incl cranking bending and binding with MS wire (annealed) not less than 0.9mm or securing with clips complete all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified & as directed

all as per item No 24 above but for 75mm bore (dia).

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) rubbish off the premises complete all as specified & as directed

M&L for PCC 1:3:6 type C-1 (20 mm graded aggregate) as in copping, surface channel, benching of manhole / drain etc slightly rounded or chamfered angles and throating, as directed incl finish the surfaces smooth without using extra cement complete all as specified and directed.

M&L 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base etc. complete all as specified and directed

M&L Cement Concrete 1:3:6 (20mm graded aggregate), 75mm thick as in Plinth Protection/ Foot Path/hardstanding etc, finishing Concrete Surfaces Even and Smooth without using Extra Cement complete all as specified & as directed

M&L Cement concrete chequred coloured tiles 25cm x 25cm x 20-25mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, cut and polished over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for pavement ceramic tile (min size 300 x 300 mm) and 8 to 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed.

S&F for 60mm thick factory made (ISI marked) chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks lawns. Drive ways or light traffic parking etc of required strength thickness and size/shape, made by table vibratory method using PU mould laquer finish laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete all as specified and directed.

Dismantling posts or struts (Wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified & as directed.

Dismantling fencing wire mesh, of any type and size complete all as specified & as directed

Dismantling old GI wire and barded wire any type complete all as specified & as directed.

Excavating in Post Holes (or similar holes) in Soft/Loose Soil, each not exc. 0.50 Cubic Metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 Cm, watering, and removing surplus soil to a distance not exc 50.00 Metre and making good surface, complete all as specified and as directed.

M&L for Cement Concrete 1:3:6 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. including Formwork as required/ordered at Site(s), complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping and around MS post above GL and wall of trough including necessary form work complete all as specified and directed.

M&L for MS work for fencing post and struts made from angle iron and flat iron including cutting tops to shape, drilling holes and notching for fixing of wires etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe -290 Gde E-165, complete all as specified and directed.

M&L for MS work as in iron plats (150x150x6mm) including cuttings to shape, welding as directed and fixing with scres, bolts etc conforming to Fe-290. Gde E-165 complete all as specified & as directed

M&L Mild Steel Round Bars 10mm dia and Over as Tie Bars, cut to length, bent to shape as required including cranking, bending, hook-ing Ends as required for Chain Link Fencing strengthing and fixing with Mild Steel Bolts, Nuts, etc. in Fencing Post, complete all as specified and as directed.

M&L Mild Steel Screw Bolts (machine made) 11mm to 15mm diameter of Neck and length of Bolt exc. 50 mm and not exc. 75 mm with hexagonal or square heads at one end and screwed the other, or screwed both Ends, each screwed End to be fitted with Washers and one hexagonal or square Nut, complete all as specified and as directed.

Supply only Chain Link Fencing Mild Steel Galvanised Wire any size as approved, lapped, straining and binding with including Mild Steel Binding Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. NOTE : Cost of Mild Steel Binding Wire deemed to be included in the Quoted Unit Rate.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standars, rails, straining bolts, etc, including provision of binding wire complete all as specified & as directed

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm barbed with 2 mm dia barbs @ 75 mm spacing straining and fixing including securing or lying at crossing with and provision of galvanised MS staples or steel pins incl dismentling of old barbed wire complete all specified and directed

S & F punched tape concertina coil fencing 600mm coil dia 10 meter openable length having 50 Nos rounds per 6 meter length, spring core wire (2.50mm thick) of high tensile strength of 165 Kg/Sq mm with tap (.52 mm thick) including dismentling of old U/S concertina coil complete all as specified and directed.

M&L preparing new steel surfcaes over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of red oxide Primer, complete all as specified and as directed.

M & L for framed work as in doors or gates of framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, and hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe 410-W (Gde-E-250) Quality-A and hanging, also fastening and fixing complete all as specified & as directed

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified & as directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of cement base paint complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies, type B0 1:2:4 (12.5 mm garaded aggregate) 25mm thick (measured solid), set in cement mortar in 1:4 complete all as specified & as directed

Dismantling wrought iron or mild steel work of any description and removal from site complete all as specified & as directed

M&L preparation of old steel surfaces and applying one coat synthetic enamel paint complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & as directed

M&L preparation of new concerte surfaces and applying two coat synthetic enamel paint over a coat of primer complete all as specified and directed.

IRFANAHMAD CONTRACTOR (BID ID -3116828)

M/s MAA SHAKTI CONSTRUCTIONS AND SUPPLIERS (BID ID -3114452)

M/S RAJESH ARORA (BID ID -3117642)

SUBHASH GUPTA (BID ID -3116568)

MUNESH KUMAR TYAGI (BID ID -3117486)

M R CONSTRUCTIONS (BID ID -3116959)

VIMAL CONSTRUCTION CO (BID ID -3117434)

AMAN MATERIAL AND LABOUR CONTRACTOR (BID ID -3117010)