KLMBP 2021-22, 251/22 -,KAKSHAYI DRINKING WATER PROJECT PUMP SET INSTALLATION

Amount

Electrification

od1671066/2021_2022 : Supply Conveyance , Installation , testing and commissioning of 15 H P EAUM 70/06 Aquatex Texmo Submersible pump set having Head range 27 m to 162 m , 65mm pipe size etc as required.

90.14.24.7 : Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.

90.14.28.17 : S & F Motor starters of the following ratings

od1675657/2021_2022 : Supply, conveyance and erection of the following sizes of 'B' class GI pipe fittings and painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc. as required. 65 mm GI Pipe

od1675567/2021_2022 : S&F 65 mm Errector Clamp

od1675568/2021_2022 : S&F 65 mm G I Bend

od1675569/2021_2022 : Supply and fixing 5/18 nuts & bolts for flange fitting

od1675570/2021_2022 : Supply and fixing 65mm Tale E flange

od1675571/2021_2022 : Supply and fixing 65mm Tale F flange

od1675572/2021_2022 : S&I of 65mm Non Return Valve Heavy

od1675573/2021_2022 : Supply and providing 65 mm dia Sulics walve on the delivery pipe for submersible pumpset.

od1675610/2021_2022 : Supply and providing Teflon tape

od1675611/2021_2022 : Supply and fixing Shellac

od1675612/2021_2022 : Supply and providing Cable joint tape

od1675613/2021_2022 : Nylon rope

90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br> Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

90.14.2.2 : Supply and providing 3mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.2 : Supply and providing heavy duty 'A' section neoprene gasket in the panel board

90.14.4 : Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC)

90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

90.14.6 : Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

90.14.7 : Supply and providing copper earth bus in the panel board

2.1.2 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

2.1.3 : Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 Amp TP&N

2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

od1620213/2021_2022 : S &amp; F 16 A ,415 v, 50 Ka , Motor Protection Circuit Breaker suitable for 15 Hp motor pump set having Thermal release range 15-20 A, L&amp;T make Cat No. ST41915OOOO or equivalent make with Short circuit &amp; Over load protection

od1620214/2021_2022 : S&amp; F Three phase multi function meters to read V, A ,F and PF accuracy class 1&lt;br&gt;on existing panel and giving connections. L &amp; T make Cat. No: WL 4110 OOOO or equivalent make .

od1620215/2021_2022 : S &amp; F LED phase indicators for all voltage ranges - Red,Yellow &amp; Blue Colour

5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.6.10.2 : Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required

1.17.20 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.30 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

90.6.4.62 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

90.6.6.4 : Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

90.16.2.1 : Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class)

90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.

od1620216/2021_2022 : S&amp;F 25X6MM Brass nut , bolt &amp; washer

od1620217/2021_2022 : S&amp;F 12X3MM Brass nut , bolt &amp; washer

90.12.24.3 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

90.12.24.5 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

od1620218/2021_2022 : Supply &amp; installation of SMC 3 phase meter box of size 650x350x250mm Sintex make GS-MB -6535 or equivalent

od1620219/2021_2022 : Supply &amp; fixing 160 A Fuse base for DIN type HRC fuse links

od1620220/2021_2022 : Supply &amp; fixing 6 - 63 A DIN type HRC fuse link

od1620221/2021_2022 : Supply &amp; fixing 100 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

od1620222/2021_2022 : Supply and providing metallic support for suction/delivery side MS/GI pipe using suitable Channel/ Angle/ flat / square or rectangular pipe welded together and painting two coats of synthetic enamel paint over a coat of red oxide primer .

Part-11 -Remuneration.(As per G.O.No.2878/2015/LSGD dated 22/9/2015)

A. R Sivasankaran

Bidder Name

A. R Sivasankaran

ALIYAR T K