Supply, Erection, Testing and Commissioning of LILO of one circuit of the 220 kV D/C Chorania – Salejda transmission line at 220kV Khoraj Substation using AL-59 conductor, comprising 40 Rkm on D/C towers / Narrow Base Towers and 3.961 Rkm on M/C towers / Narrow Base Towers, with a total double-circuit line length of 48.616 Rkm and an overall route length of 52.577 Rkm on turnkey basis, under Limbdi Construction Division of Surendranagar Circle.

Sr. No. Description of Works - SAC Code 9954 Amount in Rs.

PART -A Supply of Materials

Erection of Line

TOTAL F.O.R. COST WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL END COST WITH GST

I am / we are willing to carry out this service package of works contract stated above at GST 18% (in

figure) ______ % (in words _____ %) below / above the estimated TOTAL END COST for all the items

stated there in.

The amount of tender works out with above % (in figure) for TOTAL END COST Rs. _____________ (in

I / we confirm that our above quoted rates are ON firm price basis; except price variation will be

applicable of Supply of Tower material (including bolts & nuts), Supply of Conductor, Supply of

Hardware & accessories for conductor and Erection portion.

1) Separation of the Contract into Supply of Goods, Services and Civil Work, is only for convenience and better

economical management and for the ease of Accountancy but the entire Contract, is to be assessed under GST

Law, as the Works Contract Service, which is, as per the provisions of Section 2(30), read with, Section 2(119),

further read with, Paragraph 6(a) of the Schedule II to the CGST Act, 2017 or SGST Act, 2017 and similar

provisions, applicable under the UTGST Act, 2017and the IGST Act, 2017 and the entire activity, would be

subjected to levy of Tax, at the rate of 9% CGST + 9% SGST or 18% IGST, under the GST Law. However,

Classification Codes for different segments or portions of the Works Contract, may be specified separately, in the

Supplies, with a final common Classification Code of Works Contract Service.

2) The Bidder is hereby conveyed that only SAC Code and Tax rate for supply of Service Works Contract i.e. 18%

is relavant for the purpose of contract since the contract is works contract and any separation in the works is for

better management and convenience purpose.

It is to state that bidders are however requested to fill the HSN code item by item for the knowledge and

transparency purpose which shall have no bearing on price or taxation payment.

Signature of Authorized Representative of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company

FOR REFERENCE ONLY

Supply, Erection, Testing and Commissioning of LILO of one circuit of the 220 kV D/C Chorania – Salejda transmission line at 220 kV Khoraj Substation using AL-59 conductor, comprising

Rkm on D/C towers/Narrow Base Towers and 3.961 Rkm on M/C towers / Narrow Base Towers, with a total double - circuit line length of 48.616 Rkm and an overall route length of 52.577 Rkm on

turnkey basis, under Limbdi Construction Division of Surendranagar Circle.

Tender no: ACE(P&C)/Contract/E-485/TL/220kV/S&E

Description of Supply with Detail Specification of Service Unit Freight, Packing FOR Total Cost

Unit Insurance FOR Unit Rate

Sr. No. Package - Works Contract (SAC Code: Unit Quantity Unit Rate & Forwarding (Excl. GST)

Charges in Rs. in Rs.

9954) charges in Rs.

A Supply of Materials

A.1 Tower Materials

A.3 Silicon Rubber Insulators

A.3.1 220kV, 90kN Suspension SRI Nos. 782 4378.00 86.00 37.00 4501.00

A.4 Insulator hardware for AL-59 Conductor (61/3.50)

A.4.1 Single Suspension Nos. 654 2447.00 18.00 8.00 2473.00

A.4.3 Double Suspension Nos. 60 5257.00 36.00 16.00 5309.00

A.4.7 Vibration Damper Nos. 3480 1243.00 12.00 5.00 1260.00

A.4.8 Repair Sleeve Nos. 32 695.00 7.00 3.00 705.00

A.5.1 48 Fibre (DWSM) OPGW fibre Optic cable kM 52.577 195533.00 2385.00 1022.00 198940.00

Description of Supply with Detail Specification of Service Unit Freight, Packing FOR Total Cost

Unit Insurance FOR Unit Rate

Sr. No. Package - Works Contract (SAC Code: Unit Quantity Unit Rate & Forwarding (Excl. GST)

Charges in Rs. in Rs.

9954) charges in Rs.

Installation Hardware set * & accessories for above OPGW

i.e. all cable fittings & accessories like suspension clamps,

tension clamps, vibration dampers, earthing clamps, down

lead clamps, in-line splice enclosures etc. including; Pigtails

a) Fibre Optic Approach Cable -

400 Mtrs - For 220KV S/S &

500 Mtrs - For 400KV S/S

(with installation hardware like ties/

clips / cleats, conduits, ducts,

supports, fittings, accessories etc).

(Any variation in quantities shall be absorbed by contractor)

TOTAL COST PART - A WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - A WITH GST

1). One set of installation hardware shall contain all installation hardware fittings as may be required for 1 kM of OPGW cabling.

2). LCT (Local Craft Terminal- Laptop) with EMS software shall have to be supplied by Manufacturer free of cost for local as well as remote configuration of FOTE equipment.

3) Rates are taken from SoR 2024-25 for transmission line materials

OEM will have to submit confirmation in written for following.

1). The bidder shall furnish the copies of valid type test reports for the offered equipment from NABL accredited Laboratory or KEMA type tested.

2). The bidder should have to confirm for guarantee of 5 years from the date of receipt of equipment in store in good condition or three years from the date of commissioning of offered FOTE

(Operational for Speech+DATA+Protection + Remote SCADA over OPGW) at respective Sub-station which ever will be earlier.

3). The bidder should have to confirm the service and spares support for at least 10 years after the guarantee period.

A) SOR GETCO/1155/12/2025 Approved Date: 20-12-2025 considered.

SEAL & SIGNATURE OF BIDDER

ERECTION PORTION

FOR REFERENCE ONLY

Supply, Erection, Testing and Commissioning of LILO of one circuit of the 220 kV D/C Chorania – Salejda transmission line at

220 kV Khoraj Substation using AL-59 conductor, comprising 40.000 Rkm on D/C towers/Narrow Base Towers and 3.961 Rkm

on M/C towers / Narrow Base Towers, with a total double - circuit line length of 48.616 Rkm and an overall route length of

52.577 Rkm on turnkey basis, under Limbdi Construction Division of Surendranagar Circle.

Tender no: ACE(P&C)/Contract/E-485/TL/220kV/S&E

Sr. Description of Supply with Detail Specification of

Unit Quantity Unit Rate (Excl. GST)

No. Service Package - Works Contract (SAC Code 9954)

B ERECTION OF LINE

The work of detail survey, preparation and submission

of profiles in 6 copies (PLSCAD as well as hardcopy),

Detail scope of Work :-

(a) Fixing of tower as per actual requirement, site

condition and plotting of line on profile having

standard details i.e. span length, lat-long (co-

ordinate), chainage, weight and wind span, all

dimensions, scale, legends, tower spotting data etc. as

per requirement and along with all require details.

(c) Preparation and submission of tower schedule as

per standard require details with all the Major - Minor

crossing details in profile drawing and tower schedule,

1 along with due care of clearance as per prevailing kM 52.577 10222

standards i.e., for all electric line with pole, all type of

track, river, pond, nala, road, canal etc.

(d) Details of Right of Way in profile drawing. i.e.

Building, Temple, Well etc.

(g) Plotting line on TIKKA-MAP (Revenue Land map) -

Required TIKKA-MAP will be provided by GETCO.

Importantly, any work other than mentioned will align

with the specific requirements outlined by the Engineer-

Note : The survey report will be submit with sign and

stamp of the surveyor agency and engineer in charge.

Check Survey along with plotting of line route on

village (tika) map with Coordinates including detailed

survey, preparation of profiles and revision in original

route alignment, if any and as per instruction of EIC.

Excavation excluding back filling, but including

shoring, shuttering, dewatering, tree cutting for tower -

footings etc. for:-

a) Normal soil either dry or wet / Sandy soil Cu.m 667.44 307.00

b) Black cotton soil either dry or wet Cu.m 13279.540 614.00

3 c) Normal submerged/marine soil where dewatering is Cu.m

d) Black cotton submerged / Marine soil where Cu.m

dewatering is necessary

e) Soft Rock Cu.m 0.00 1066.00 -

f) Hard Rock Cu.m 0.00 2212.00 -

Installation of steel reinforcement in concrete

foundation including supply of GETCO Approved M.S.

bars, binding wire. Work also includes their cutting,

4 bending, shaping and binding with binding wire and MT 283.0130 99900.00

fixing in position of TMT bars as per drawing before the

concrete work and as per instruction of the EIC

Stub-setting with prop or template including back-

filling, during back filling dispose of excess soil and

levelling of site is to be done as per instructions of EIC

5 but excluding excavation and concreting etc. for all MT 245.198 8206.00

types of towers/extensions except special towers.

(Weight of stub, cleat & template with Bolt & Nuts of

stub & template shall be counted)

6 ---- Do ---- up to 9 to 25 mtr extension MT 20.383 9918.00

Concreting of foundation by M20/M15/M25 mixture

including shoring, shuttering, compaction, dewatering

etc. for normal tower / tower with extension upto 25mtr.

After completion of concrete work, curring (watering to -

7 concerte) is to be done as per instruction of EIC.

(Rates are inclusive of supply of GETCO approved

Grounding of towers with pipe type earthing including

excavation and back filling, with supply of all materials

like 32mm dia heavy duty 3 mtr. long G.I. Pipe, 50 x

mm G.I. flat, GI bolt-nuts, with GI spring washer, salt,

charcoal etc. as per drawing and as per instruction of

Grounding of towers with COUNTER POISE TYPE

including excavation and back-filling and supply of all

9 materials like GSS wire, GI lugs, GI bolt-nuts, GI Set. 0 15756.00 -

Spring Washer, salt, charcoal etc. as per drawing and

as per instruction of EIC.

Erection of super structure upto 6 meter extension

including tree cutting, fixing of tower accessories,

attachments except ACD /DP /NP /CIP /PP and

excluding tack welding of bolts as per instruction of

10 EIC. This includes taking delivery of tower materials MT 1409.192 10076.00

and bolt‑nuts from GETCO’s stores etc. for normal,

extension & special towers at destination and keeping

them in safe custody and transporting the same to

Same as above but erection of 9/12/15/18/21/25 Mtr.

extension with tower.

Fixing of Anti-climbing devices including supply of

12 barbed wire as per drawing and as per instruction of Loc. 204 3589.00

EIC. (C ) 220kV

Fixing of DP / NP / PP / CIP including supply of plates

13 and supply of G.I. bolt-nuts & tack welding as per Loc. 177 3379.00

drawings. (D/C)

Fixing of DP / NP / PP / CIP including supply of plates

14 and supply of G.I. bolts-nuts & tack welding as per Loc. 17 6758.00

drawings and as per instruction of EIC. (M/C)

Tack welding of nuts upto approx. 10 mtrs. height OR

two bottom-most panel from ground level at three

15 places on the nuts diametrically and applying zinc rich Per Bolt 718750.0 15.00

paint immediately after tack welding and as per

instruction of EIC.

Stringing of ACSR/ AAAC/AL-59 6 (Six conductors for

Double circuit including laying, jointing, tensioning,

clamping with armour rods, hoisting of insulator string

fixing of jumpers, dampers etc. & with required tree

cutting on entire length for adequate clearances / safe

charging of line, as per instruction of EIC.

Termination and connection for making LOOP-IN-

LOOP-OUT arrangement with existing line during

specified outage including restringing of existing

conductors OR dismantalling / new stringing for Job

making LILO arrangements with existing line or for Work

change over line as per approved LILO arrangement in

profile as per instruction of EIC in COLD CONDITION

and dismentalled

Complete materials

Installation to be credited

of OPGW to nearfibres)

cable (24/48 by

including laying, providing required hardwares, in line

splices to be encased in Fibre Optic Splice

Enclosures, Laying and termination of a fibre optic

approach cable required to connect Overhead Fiber

Optic Cable (OPGW) between the final iin line splice

enclosure on the gantry/tower and the Fibre Optec

Distribution panel (FODP) to be installed within the

building at both the substation ends as per technical

Link up of OPGW Cable including all related activities

as per inst. Of EIC.

For Rubble soiling work: (As per BoQ=68.970cmt

required): (Miscelleneous work)

(A) Suppliying of graded stone aggregate of following

sizes (for W.B.M. Road)(3) Crushed stone aggregate

for Hard Quality up to 63 mm stze : Rate/cmt=400Rs,

Surendranagar SoR 2024-25, Item no.26011C)

(B) Spreading the stone aggregate for rolling and

W.B.M. including filling the interstices to required

camber and gradient (excluding spreading of

lindage)(ii) 40mm to 63mm size aggreagates (H.B.):

Rate/cmt=247.28Rs (R&B, Surendranagar SoR 2024-

25, Item no.26018A), Hence: Job

(C) Sand, stone aggregate & soling stone brick/ cinder

aggregate (Lead).

3)- soling stone - RATE PER UNIT PER Km. FOR

KILOMETERAGE ABOVE 5Km.LEAD

FALLING IN TOTAL RANGE BETWEEN ABOVE

50Km: Rs 9.67/km/cmt (R&B, Surendranagar SoR

Total A+B+C= Rs.27,588.00+ Rs.17054.90+

Work of Painting of Line name, Location No., two coat

Painting Color code of desired length and telephone

no. on Tower Leg with letter of Gujarati language

using ISI marked Paint as per instruction of EIC

including Supply of paints and other require materials..

b) All four legs - For 2 Nos. of Line (D/C)

TOTAL COST PART - B, SCHEDULE - 01 WITHOUT GST

Service of "Works Contracts" GST @ 18% (SAC 9954)

TOTAL COST PART - B, SCHEDULE - 01 WITH GST

While calculating the weight of stub-setting, the weight of stub, cleat & templates shall also be added in

2 Red oxide & zinc rich paint shall be applied after tack welding of nuts.

3 The above rates are with supply of GETCO approved cement and steel by the contractor.

4 For concreting work, mixture machine is to be used as per site condition and as per inst. of EIC.

While crediting of material, agency has to submit the original gate pass copy / CR copy with required

documents as per instruction of EIC

The rate indicated above includes taking delivery of all stringing material from contractor store GETCO’s

store keeping them in safe custody and transporting the same to erection site.

For any crediting of material related work, agency has to submit the original gate pass copy / CR copy with

required documents as per inst. and as per requirement of EIC or when demanded.

Signature of Authorized Representative

of Company / Agency

SEAL & SIGNATURE Status _________________

OF BIDDER Name of bidder Company