Loading…
Loading…
Tender Value
₹82.2 L
EMD Value
₹83,000
Closing Date
9 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer, R&B Division, Jamnagar
Construction of D Type 1-Unit at Lalpur, Dist.Jamnagar
317898
06 of 2026-27
Open
Civil Works
Jamnagar
4 documents required · 4 mandatory
₹2,400
Executive Engineer, R&B Division, Jamnagar
₹83,000
25 Jun 2026
25 Jun 2026
25 Jun 2026
9 Jul 2026
25 Jun 2026
Name of Work : Construction of D Type -01 unit at Lalpur Dist: Jamnagar
BILL OF QUANTITIES
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
1 Excavation for foundation in Dense or Hard soil 182.00 Cum. 161.07
incl. sorting out and stacking of useful materials
and disposing of the excavated stuff with all lead
2 Excavation for foundation in Hard Murrum incl. 153.00 Cum. 273.44
sorting out and stacking of useful materials and
disposing of the excavated stuff with all lead and
3 Excavation for foundation in Soft Rock not requiring 128.00 Cum. 306.37
blasting incl. sorting out and stacking of useful
materials and disposing of the excavated stuff up to
all lead and lift.
4 Providing and laying cement concrete 1:2:4 (1- 35.00 Cum. 3803.06
Cement : 2- Coarse sand : 4- graded stone
aggregates 20 mm nominal size) and curing
complete excluding cost of formwork in Foundation
5 Pro. & laying controlled cement concrete M-250 and 91.00 Cum. 4836.89
curing complete inclu. the cost of form work and
foundation, footings, base of column and mass
6 Providing and laying Controlled cement concrete M 25.00 Cum. 8008.29
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Column FOR all Floor.
7 Providing and laying Controlled cement concrete M 31.00 Cum. 6543.79
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Plinth Beam .
8 Providing and laying Controlled cement concrete M 13.00 Cum. 7011.42
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Beam for all floor.
9 Providing and laying Controlled cement concrete M 17.00 Cum. 6475.11
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Slab for any thickness
10 Providing and laying controlled cement concrete 15.50 Cum. 4674.06
M.250 and curing complete excluding the cost of
formwork and reinforcement for reinforced
concrete work in GRADE Slab
11 Providing and laying Controlled cement concrete M 2.00 Cum. 7266.95
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Stair Case for all floor.
12 Providing and laying Controlled cement concrete M 3.00 Cum. 6502.38
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in Lintel for all Floor.
1 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
13 Providing and laying Controlled cement concrete M 2.00 Cum. 7262.91
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work for chhajja for all floors.
14 Providing and laying Controlled cement concrete M 2.00 Cum. 13174.44
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work for Fins for all floors.
15 Providing and laying Controlled cement concrete M 4.00 Cum. 6276.14
250 and curing complete including the cost of
formwork and excluding cost of reinforcement for
reinforced concrete work in wall caps/ coping.
16 Providing and laying cement concrete 1:4:8 (1- 46.00 Cum. 2910.82
cement : 4-Sand : 8-Crust stone aggregate 40mm
nominal size) & curing complete excluding cost of
formwork in foundation and plinth.
17 Providing Thermo Mechanical treated bar FE-500D 25210.00 Kg. 77.28
Steel Reinforcement for R.C.C. work including
bending, binding and placing in Position complete
18 Filling available excavated earth (excluding 187.00 Cum. 137.47
rock) in trenches. plinth, sides of foundations
etc. in layers not exceeding 20cm. in depth
consolidating each disposited layer by
ramming and watering.
19 Filling in foundation and plinth with murrum or 130.00 Cum. 304.59
selected soil in layers of 20cm. thickness including
watering, ramming and consolidating etc.
20 Filling in plinth with sand under floors including 2.00 Cum. 489.28
watering ramming, consolidating and dressing
21 Carrying out plinth treatment to post construction / 141.00 Sqm. 124.35
existing structure by spraying chemical solution for
termite control treatment including labour and
material consistment with I.S.I specification.
22 Brickwork using common burnt Clay building bricks 23.00 Cum. 4310.73
having crushing strength not less than
kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:5. (1- Cement : 5 -fine sand).
23 Brickwork using common burnt Clay building bricks 84.00 Cum. 4599.15
having crushing strength not less than
kg./Sq.Cm. in super structure in Cement Mortar 1:5.
(1- Cement : 5 -fine sand) for all floor.
24 Half brick masonry in common brunt clay 31.00 Sqm. 702.89
building bricks having crushing strength not less
than 35 Kg/Sq.Cm. in Cement mortar 1:4 ( 1-
Cement : 4 -coarse sand ) in Super structure for
25 Providing and laying 25mm polished kota stone slab 5.00 Sqm. 1019.39
flooring over 20mm (Average) thick base of cement
mortar 1`:6 (1-cement:6-coarse sand) or L.M. 1:1.5
laid over and jointed with grey cement slurry
including rubbing and polishing etc comp.
2 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
26 Providing and laying 600 x 1200 mm double charge 59.00 Sqm. 1895.77
Vitrified tiles 10mm thick tiles flooring over 20mm
(Average) base of Cement Mortar 1:6 (1-Cement :
Coarse Sand) on new surface and jointed finished
with 3mm Horizontal grooves filed with coloured
epoxy grouting cleaning the surface etc. complete
using colour & shade to be approved by Architect.
27 Providing and laying 600 x 1200 mm double charge 9.00 Sqm. 1975.56
Vitrified tiles 10mm thick tiles for skirting over
20mm (Average) base of Cement Mortar 1:6 (1-
Cement : 6 Coarse Sand) on new surface and
finished with 3mm Horizontal grooves filed with
coloured epoxy grouting & cleaning the surface etc.
complete using colour & shade to be approved by
28 Providing and laying 300 x 600mm Glazed ceramic 64.00 Sqm. 1597.82
wall tiles with digital prints with matt/glassy finished
with 3mm Horizontal grooves filed with coloured
epoxy grouting 8mm thick in skirting and dedo on a
bed of 10mm thick cement mortar 1:3 (1-cement : 3-
coarse sand ) colours, shade and design to be
approved by EIC.
29 Providing and laying 600 x 600 mm Matt Porcelain 7.00 Sqm. 1485.71
Tiles 10mm thick tiles flooring over 20mm (Average)
base of Cement Mortar 1:6 (1-Cement : 6 Coarse
Sand) on new surface and jointed finished with 3mm
Horizontal grooves filed with coloured epoxy
grouting cleaning the surface etc. complete using
colour & shade to be approved by Architect.
30 Providing and laying 600 x 600 mm MATT finish GVT 6.00 Sqm. 1779.62
tiles 10mm thick tiles flooring over 20mm (Average)
base of Cement Mortar 1:6 (1-Cement : 6 Coarse
Sand) on new surface and jointed finished with 3mm
Horizontal grooves filed with coloured epoxy
grouting cleaning the surface etc. complete using
colour & shade to be approved by Architect.
31 Providing and laying white glazed tiles 6mm thick in 7.00 Sqm. 964.47
flooring treads of steps and landing laid on a bed of
12mm thick cement mortar 1:3 (1-cement: 3-coarse
sand) finished with flush pointing in white cement.
32 Providing and laying white glazed tiles 6mm thick in 30.00 Sqm. 1091.96
skirting, risers of steps and dedo on a bed of 10mm
thick cement plaster 1:3 (1-cement: 3-coarse sand)
and jointed with white cement slurry)
33 Providing and fixing 18mm thick black granite stone 43.00 Sqm. 3174.43
in Jambs & sills for window over 10mm (Average)
thick base of cement mortar 1:3 (1-cement : 3-
coarse sand) laid over and jointed with grey cement
slurry including rubbing and polishing etc.
34 Providing & laying both side POLISHED KOTAH 13.00 Sqm. 851.43
STONE SHELVES to C.B. with making the grooves
in the walls and fixing the kotah stone finishing the
same with cement mortar 1:2 etc. complete.
3 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
35 Providing and fixing sandwitch type platform of 3.00 Sqm. 8769.83
75cm wide and 75cm high from finished floor level
using 25mm thick kotah stone slab as a base and
18mm thick mirror polished full round edged granite
slab on top , 25mm thick mirror polished /kotah
stone supports of 75cm wide at 45cm C/C or as
directed including providing /Granite side 'Patta' of
30cm wide on three sides of the platform and S.S.
Kitchen Sink of size 610x460x200mm of Nirali or
equilant brand as per detailed drawing and as
36 Providing and fixing sandwitch type platform of 1.00 Sqm. 8500.16
75cm wide and 75cm high from finished floor level
using 25mm thick kotah stone slab as a base and
18mm thick mirror polished full round edged granite
slab on top, 25mm thick morror polished /kotah
stone supports of 75cm wide at 45cm C/C or as
directed including providing / Granite side 'Patta' of
30cm wide on three sides of the platform as per
detailed drawing and as directed.
37 Providing and laying 50mm thick cement concrete 89.00 Sqm. 347.14
flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded
stone aggregate 20mm nominal size) laid in one
layer and finished with a floating coat of neat
38 Providing and mixing water proofing materials in 33.00 Per Bag 49.25
cement mortar in proportion recommended by the of
manufacturer. Kgs
39 Providing and laying broken China Mosaic Flooring 89.00 Sqm. 779.69
for Terrace using 12mm to 20mm broken pieces of
glazed tiles to be laid over cement mortar 1:3 to
plain or slope and to be tempered to bring mortar
crème out upto surface using white cement
including rounding off junctions and extending them
up to 15cm. along the wall, clearing with water and
oxalic acid etc. as directed.
40 Providing and fixing 35mm thick flush door of 7.00 Sqm. 4496.52
standard quality with both side laminated including
all heavy type S.S. fixture & fastenings with mortise
lock etc complete.
41 Providing and fixing decorative T.W. Door 30mm 3.00 Sqm. 4113.73
thick with existing granite or Marble Frame with
style of size 100x30mm bottom rail 100x30mm lock
rail 150x30mm of top rail of 150x30mm size with
partly 12mm thick water proof plywood and 1mm
thick lamination to both side including 20mmx20mm
teak wood and top panel with 2mm dia S.S. hollow
pipe as safety bar and PVC mosquito net with
Velcro fitting including heavy type S.S. fixtures and
fastening including French polishing etc complete.
4 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
42 Providing and fixing FRP of 28mm thick Fibre Glass 6.00 Sqm. 1560.32
shutter with 1.5 to 2.0 mm thick fire retardent grade
FRP skin in depressed panel design having extra
reinforcement on sides & edges & in Gel coat finish.
The core of the shutter is to be filled up with
injected retardent grade polyurethane foam done
in situ alongwith embedded wooden pieces for
stiffening & also taking hinges & fintures. The whole
FRP frame & shutter is to be water proof ,weather
proof, termite proof & resistance to mild acid/alkali.
Rates are to be inclusive of S.S hinges with
necessary screws & alluminium S.S fixtures &
fastenings & fastener sleeve.
43 Providing and fixing colour anodized aluminum 6.00 Sqm. 6695.29
sliding Four track window having frame bottom
section size 124mm x 51mm Of Jindal Section
21203 & side and top section size 124 x 41mm of
Jindal section 20837 including shutter frame size
x 30mm of Jindal section 20993 with sliding type
three shutters with 5mm thick transparent tinted
float glass and one shutter for mosquito net of wire
gauge including rubber beading PVC virgin, heavy
type handle, bearing, fixture and fastening etc.
including all labour and material etc. complete.
44 Providing and fixing colour anodized aluminum 7.00 Sqm. 6498.34
sliding three track window having frame bottom
section size 124mm x 51mm Of Jindal Section
21203 & side and top section size 124 x 41mm of
Jindal section 20837 including shutter frame size
x 30mm of Jindal section 20993 with sliding type
three shutters with 5mm thick transparent tinted
float glass and one shutter for mosquito net of wire
gauge including rubber beading PVC virgin, heavy
type handle, bearing, fixture and fastening etc.
including all labour and material etc. complete.
45 Providing & fixing coloured anodized aluminium 1.00 Sqm. 2647.21
sectional louvered ventilator with frame size
63x38.10mm & 1.80mm thick ground glass and
coloured anodized aluminium louvers fixtures and
hold fasting etc. complete.
46 Structural steel work ( Confirming to IS 4923-1997) 1696.00 Kg. 131.82
riveted, bolted or welded in builtup for all type
sections, in framed work, including cutting,
hoisting, fixing in position and applying a priming
coat of approved steel primer all complete as per
the structural designs and directions of Engineer in
charge.Column ( 122 x 61 x 3.6mm )
47 Providing and fixing Colour coated corrugated 27.00 Sqm. 856.48
/semi corrugated Galvalume sheet 0.50 mm thick
roofing fixed with GI "J" or "L" hooks bolts and
nates 8mm dia with bitumen washer filled with white
lead complete excluding cost of purlins, rafters and
trusses as directed.
48 Providing 15mm thick cement plaster in single coat 138.00 Sqm. 164.69
on Rough (Similar)side of single or half brick walls
for interior plastering upto floor two level and
finished even and smooth in Cement mortar 1:4 (1-
cement :4-sand) for all floor.
5 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
49 Providing 20mm thick water proof cement plaster 181.00 Sqm. 327.24
for sunk in single coat on brick concrete wall for
interior plastering upto floor two level finished even
and smooth (ii) Cement Mortar 1:3 (1-Cement:3-
sand) and mixing water proofing materials of
approved brand and manufacture in cement mortar
in proportion recommended by the manufacturer
for all floors.
50 Filling in foundation and plinth with brick Bats. 2.00 Cum. 625.47
Chhara in layers of 20cm. thickness including
watering, remming and consolidating etc.
51 Providing 10mm thick cement plaster in single coat 95.00 Sqm. 165.19
on ceiling and sofits of stair cases for interior
plastering upto floor two level and finished even and
smooth in Cement mortar 1:3 (1-cement:3-sand) For
52 20mm thick sand faced cement plaster on walls for 743.00 Sqm. 323.21
all height above ground level consisting of 12mm
thick backing coat of C.M. 1:3 (1-cement : 3-sand)
and 8mm thick finishing coat of C.M. 1:1 (1-cement :
1-sand) etc. complete.
53 Applying Two Coats of Birla or Asian Acrylic Lappy 226.00 Sqm. 40.59
(Putty) and two coats of primer of approved brand
and manufacture on New Wall Surface to give an
even shade including thoroughly brushing the
surface free from mortar dropping and other
foreign matter and sand papered smooth.
54 Wall painting (two coats) with plastic emulsion paint 226.00 Sqm. 129.93
of approved brand and manufacture on
undecorated wall surface to give an even shade
including throughly brushing the surface free from
mortar droppings and other foreign matter and
sand papered smooth.
55 Finishing Wall with Weather Proof Exterior Emulsion 743.00 Sqm. 122.13
Paint on Wall Surface (Two Coats) to give an
required shape even shade after thoroguhly
brushing the surface to remove all dirt, and remains
of loose powdered materials etc. complete
56 Providing and fixing 90 cm high Stainless steel 10.00 Rmt. 4878.30
railing made from anticorrocive 316 grade S S pipe
of 50 mm dia (16Gauge) as hand rail with S S
grade Baluster of 38 mm dia (16Gauge) as a vertical
support fixed in RCC slab at 1.2m c/c including
three horizontal S S pipes of 25 mm dia (16Gauge)
at eqal distance fixed by 18.75 mm dia (16Gauge) S
S pipe with baluster including accessories as per
detailed drawing as directed etc. complete.
57 Providing and fixing stainless steel SS 316 type 8.00 Rmt. 2265.43
railing at 850mm height and of 50mm dia SS pipe
with wall support at 1.5mt center to center pipe as
15mm dia at required spacing as per design and SS
having 316 grade and 15 guage pipe including
fastening, hold fast, clumps, coach bolts for fixing to
wall including touching finishing to wall etc
6 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
58 Providing and fixing frame type CB shutter of 18mm 12.00 Sqm. 5226.75
thick water proof plywood with 1.00mm ISI quality
1.0mm lamination for outside of frame and
cupboard and 0.80mm thick lamination to inside of
cupboard including necessary , hydraulic type S.S.
hinges , fixtures , fastenings of standard quality S.S.
with locking arrangement etc complete as per
detail drawing and as directed by Engineer-in-
59 Providing and fixing cupboard with aluminum pipe 4.00 Sqm. 9292.00
frame of size 50x25mm filled with non-teak wood
and 18mm thick water proof plywood shutter with
nos of SS basket two of size 18" x 20" x 4" , two of
size 18"x 20" x 6" and two of size 18" x 20" x 8" with
necessary intranal arragement front plywood
necessary telescopic channels for drawers and
remaining part of two shutter including 1.00mm
thick laminated sheet for outer face and 0.8mm
sheet for inner face and with 20x20cm teak wood
beading including necessary S.S. hinges and S.S.
fixtures etc complete.
60 Providing and fixing box type cupboard for 13.00 Sqm. 7549.75
wardrobe including frame work with 19mm thick
water proof plywood rear side with 8mm thick
water proof plywood and shutter with 19mm
plywood with necessary drawers of same materials
with 1.00mm thick lamination sheet for outside and
0.80mm thick laminated sheet for inside work.
including cost of all heavy type stainless steel
fittings, sliding channels , locking arrangements for
shutter and drawers including teak wood beading
etc complete as per design and drawings.
61 Providing and fixing 5mm thick glass mirror 7.00 Sqm. 2544.19
machine cut belveled edge mounted on wall with
special type wall touch SS mirror bracket fixing with
necessary plugs.
62 Providing and fixing wash down water closet 1.00 No. 9408.15
(European type Wall hung) Jaquar Vignette wall
hung size of 615 x 400 x 363mm with Hydraulic seat
cover with inlet & outlet gasket, CI chair brackets
including concealed type Metropole flush valve
40mm concealed body 100mm square plate of
Jaquar or equivalent quality with Health flow set
63 Providing and fixing water closet closet squatting 1.00 No. 3923.85
pan (Indian type W.C.pan / Orrissa pan) size 580mm
including Foot rest G.I. inlet connection & C.P.
Brass Flush cock of 25mm dia. etc. comp.
64 Providing and fixing special type wash basin on 2.00 No. 6742.76
counter top of size 610x460mm of CERA or
equivalent quality including pillar tap, Stop cock
65 Providing erecting and fixing Tripal layer ISI water 3000.00 Liter. 12.12
tank of required capacity each with all necessary
fittings , tank cover and as required connection etc.
complete on terrace
66 Providing and fixing Jaguar or equivalent regular 5.00 No. 801.94
body stop cock 15mm dia
67 Providing and fixing Heavy type lang body bib tap of 3.00 No. 1103.93
Jaguar or Equivalent quality of 15mm dia etc
7 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
68 Providing and fixing Jaquar single lever high flow 2.00 Set 13960.22
diverter with concealed body and expose parts kit
of alive or equivalent model and bath tube spout
with button attachment for hand shower and
shower arm 400 x 25 x 25mm square shape for wall
mounted and hand shower for ABS plats with
flexible tube 8mm dia and 1.5Mt long with nuts and
wall outlet with shower hook and over head shower
200x300mm stainless steel with rubbit system
complete as directed by EIC.
69 Providing and fixing Stainless steel Heavy Type 2.00 No. 1150.39
Brass Towel Rack 600mm considering & 12mm dia
rod and one 20mm dia rod including 3 to 4 pegs
including C.P. Brass Brackets etc complete
70 Providing and fixing Stainless steel Heavy Type 3.00 No. 348.45
Napkin Ring etc complete
71 Providing and fixing to wall, ceiling and floor 50.00 Rmt. 794.18
galvanized mild steel tubes (Medium grade) of the
50mm nominal bore, tube fittings and clamps
including making good the wall, ceiling and floor.
72 Providing and fixing concealed center point to wall 4.00 Rmt. 170.35
ceiling & floor CPVC (SDR 13.5) PIPE having
National Sanitation Foundation (NSF) seal for
potable water of 15mm dia. nominal bore tube
fittings and clamps including making good the wall,
ceiling and floor etc. complete.
73 Providing laying and jointing in true line and level 10.00 Rmt. 72.64
15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help
of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings
etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
74 Providing laying and jointing in true line and level 12.00 Rmt. 91.83
25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help
of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings
etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
75 Providing laying and jointing in true line and level 87.00 Rmt. 148.11
40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water
including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help
of clamp at every two metre C/C or shall be
concealed as directed including necessary fittings
etc. including testing of pipe and joints and fixing
the same with adhesive solvent, including cost of all
76 Providing and fixing PVC pipe of 6 Kg / F / Sq.M. 12.00 Rmt. 356.53
Water pressure polythene pipe of 90mm inside dia.
high density complete including fixing by clamps to
wall including making good the wall ceiling and floor
8 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
77 Providing, laying and jointing in true line and level 85.00 Rmt. 897.78
110mm dia U.P.V.C. SWR Type B-Pipe conforming
to IS 13592-1992 with one end plain and other end
socketed with rubbering & fitting conforming to IS :
14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of
PVC clamp of the size 160mm diameter x 210mm
length x 196mm high at every 2000mm center to
center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes
etc. including testing of pies and joints and jointed
with adhesive solvent cement including cost of all
78 Providing, laying and jointing in true line and level 88.00 Rmt. 834.38
160mm dia U.P.V.C. SWR Type B-Pipe conforming
to IS 13592-1992 with one end plain and other end
socketed with rubbering & fitting conforming to IS :
14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed with each other with
rubber lubricant, pipe shall be fixed on wall using of
PVC clamp of the size 160mm diameter x 210mm
length x 196mm high at every 2000mm center to
center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes
etc. including testing of pies and joints and jointed
with adhesive solvent cement including cost of all
79 Providing and fixing 25mm dia Gun metal check or 4.00 No. 420.63
non-return fully way wheel valve.
80 Providing and fixing 40mm dia Gun metal check or 3.00 No. 663.42
non-return fully way wheel valve.
81 Providing and fixing 50mm dia Gun metal check or 1.00 No. 1878.60
non-return fully way wheel valve.
82 Supplying and fixing standard quality (Kranti or 1.00 No. 7105.35
equivalent) 50mm dia water meter with flange, nut
bolt etc. complete.
83 Providing and fixing PVC SWR Nahni Trap IS 14735 4.00 No. 588.26
for drain with jali of the 75mm nominal diameter of
self cleansing design with C.I. Scrwed down or
hinged grating including the cost of cutting and
making good the walls.
84 Providing and fixing S.W. gully trap with C.I. grating 3.00 No. 1292.19
brick masonry chamber and water tight C.I. cover
with frame of 300mm x 300mm size (inside) with
standard weight wtih Square mouth traps size of
100mm x 100mm size P type
85 Constructing brick masonry chamber for 9.00 No. 3417.70
underground C.I. Inspection chamber and bends
with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light
duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg.
(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )
(R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed
concrete etc. complete with Inside dimensions
455mmx 610mm and required depth for single pipe
9 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
86 Providing and fixing Pre-Cast Rubber Dye Inter 100.00 Sqm. 707.54
locking concrete Block 60mm thick with grade of
concrete M-200 pnumatic compressed by
mechanically pressed and as per approved design
including 75mm sand layer for levelling and filling
the joint with sand in proper line and level.
87 Providing and fixing Pre-Cast Concrete Kerb Stone 105.00 Rmt. 410.41
of gray cement based concrete block 30cm. length,
30cm. height and 15cm. thick of M-250 Grade
concrete as per approved design and including
excavation for fixing in proper line and level, filling
the joint with C.M. 1:3 (1-Cement : 3-Fine Sand) etc.
88 Providing and constructing and junction chamber of 6.00 No. 2588.63
size 0.45x0.45x0.45 mt. including necessary
excavating 23 Cum. brickwall, beding CC 1:2:4, top
RCC slab, 15mm thick plaster and connection of
rain water pipes as per detail drawings and as
directed by engineer – in – charge.
89 Providing filter chamber of brick work in C.M. 1:5 of 1.00 No. 13948.10
size 2.06mt X 1.21 mt x 1.20mt and excavation
dimension of 2.66x1.81x1.35mt including C.C. 1:2:4
bed concrete of 0.15mt thick including brick work in
C.M. 1:5 for 23cm thick wall including 15mm thick
cement plaster inside and out side and 10 cm thick
RCC 1:2:4 top over with CRS steel and manhole
cover with frame of minimum weight of 35 Kg and
filling filter material Kapchi and sand as per
detailed Drawing.
90 Providing recharging pit of size 1.20mt dia and 1.00 No. 42356.37
1.20mt Depth of water logging with excavation
filling the pir with brick bats & sand in
layerincluding macking 300mm dia bore dpeth of
4.5mt & filling bricks bats as per drawing as
91 Providing and fixing Sign board on Alluminium 1.00 Sqm. 3467.33
Composite Pannel 4 mm thick and letter with sticker
sheet including fixing etc complete.
92 Providing and fixing special type clamping system 10.00 No. 216.14
made out from C patti, Z patti, L Clamp , U clamp
with Nut/ Bolt and washer as suitable arrangement
for water supply and plumbing system like Drainage
Line , Rain Water line and supply line for Hot and
Cold water etc line fitting from GF to 2nd Floor
required as per site condition for fixing etc
complete. (A) 15 to 40mm dia Pipe
93 Providing and fixing special type clamping system 10.00 No. 242.40
made out from C patti, Z patti, L Clamp , U clamp
with Nut/ Bolt and washer as suitable arrangement
for water supply and plumbing system like Drainage
Line , Rain Water line and supply line for Hot and
Cold water etc line fitting from GF to 2nd Floor
required as per site condition for fixing etc
complete. (B) 50 to 65mm dia pipe
10 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
94 Providing and fixing special type clamping system 10.00 No. 275.73
made out from C patti, Z patti, L Clamp , U clamp
with Nut/ Bolt and washer as suitable arrangement
for water supply and plumbing system like Drainage
Line , Rain Water line and supply line for Hot and
Cold water etc line fitting from GF to 2nd Floor
required as per site condition for fixing etc
complete. (C) 75 to 110mm dia pipe
95 Construction of Septic Tank of size 3.50 x 2.00 x 1.00 No. 47954.80
1.80 including excavation , BBCC, RCC,
Reinforcement , Brick Masnory , finished by 15mm
plaster in cement mortar (1:3) etc complete as per
96 Drilling of 215mm dia bore hole in over burden 200.00 Rmt. 551.46
strata (alternative layer of lime stone and yellow
stridly formation) by DTH regi. up to required depth
including fixing of 175/180 dia ERW/PVC pipe if
required drilling by 165mm dia bore hole in hard
rock strata DTH drilling method up to all depth.
97 Providing and Fixing Curtain make with 100% poly fil 20.52 Sqm. 2265.43
fabric of 85 GSM (± 0.05) thickness selected by
architech & stitching and fixing with required size of
Channels arrangement and required nos of S.S.
finished support of approved shape & quality
inclusive of all necessary fixtures, fasteners and
fitting, material & all labour charges etc. complete
or as directed by EIC.
98 Providing and Fixing Wooden VIP T.V. Unit with 7.00 Sqm. 4890.42
using 19mm thick W.P. plywood in sandwiched
pattern to make the edges of the unit to be 37mm
thick with 1.0mm thick imported decorative
laminate & as per design veener clading with
groove pattern with as required width platform
50mm thick made of ply and finished with 1mm thick
full core white laminate and as required drawers
made by 19mm thick W.P. plywood telescopic
channels with other necessary fixtures and
fastening incl. of melamine polishing work etc.
complete with necessary electric point and cable
arrangements as per drawing /photos and
instruction of engineer-in charge.
99 Providing and Supplying Wooden King Size Double 2.00 No. 30779.75
Bed of size 1.96 x 1.80 x 0.35 mtr height with using
teak wood size in outer framing and internal framing
with 19mm thick W.P. plywood & both side of 1mm
thick laminate on top and back side Head board
panelling with done by venner finish dark polishing
with groove design as per drawing or EIC. Fixing in
Back side wall with necessary fixtures and
fastening inclusive of melamine polishing work
inclusive of two nos of side box of required size with
1 nos of drawer in each box with telescopic channel
with necessary fixtures etc. complete or as directed
as per drawing and as per instruction of architect
and engineer in charge.
11 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
100 Providing and Supplying Mattress of 150mm 2.00 No. 18816.30
thickness of size 1.96 x 1.80mt made of Kurlon
primary construction with bonnel spring core with
anti corrosive and high carbon wire finished with
super soft HR form top most layer with 100 GSM
cotton felt layer on top covered with premium
knitted fabric with edge support system with
reinforce spring support and foam encasing to
avoid sagging and edge roll off of branded
manufacturer etc. complete or as directred with
Bombay Dying double Bed Sheet 1 No, Relince
Recon pillow of size 24" x 16" 2 nos with pillow
cover, double bed Blanket with cotton cover and
bed runner of Polyester & Polyester Blend etc.
101 Pro. And fixing Nylon Pigeon net by fixing with SS 17.00 Sqm. 314.11
hook in Balcony, OTS, Stair etc.
102 Pro. And fixing single layer water proof gypsum 44.00 Sqm. 606.94
board 12.5 mm thick sections using water proof
board of size 1220 mm x 1830 mm x 8.0 mm
suspended by GI suspender channel of size 25 mm
x 3 mm with intermediate channel og size 18 mm x
40 mm x 0.8 mm at 1220 mm center to center ceiling
section of size 40 mm x 35 mm x 0.55 mm at 457 mm
c/c and perimeter channel A of size 20 mm x 27 mm
x 30 mm x 0.5 mm at edges & drops incl.paper tap
sand sofit cleat, anchor fastener, scoch bolt
connecting cleat,joining compound top coat on
ceiling incl.making necy opening for light fitting,
diffuser etc. comp. as per detail drawing as
103 Making Any Size of hole or as required on site in 6.00 No. 929.20
RCC beam with core cutting for passing of drainage
104 Providing and supplying premium quality 3 seater 1.00 No. 21023.15
Sofas size of 1610 x780 x 810mm made out frame
constructed with teakwood frame and 19mm thick
premium commercial plywood structure. Seat &
back & arm rest shall be finished by required
thickness high density foam (density not less than
45) this should be again covered with 30kg/sqm
density 14mm thick HR foam with Madarpat cover
on it and up holstered fabric of suggestd shade and
finish on eat, back and all visible side as per
drawing.Sofas shall be complete with all lining
material like fevicol, nails etc. with labour &
providing and fixing of leatherite/ tapestry. Legs
shall be out of wooden. Fixing of system by machine
stitches and spray gluing system. Leatherite/
Tapestry shall be as per approved colour/ shade/
texture by the Engineer in charge. Sofa shall be
finished with melamine polish and completed as per
Design detail drawings and/or given by the
Engineer -in charge.
12 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
105 Providing and supplying premium quality 2 seater 1.00 No. 14518.75
Sofas size of 1100x780x810mm made out frame
constructed with teakwood frame and 19mm thick
premium commercial plywood structure. Seat &
back & arm rest shall be finished by required
thickness high density foam (density not less than
45) this should be again covered with 30kg/sqm
density 14mm thick HR foam with Madarpat cover
on it and up holstered fabric of suggestd shade and
finish on eat, back and all visible side as per
drawing.Sofas shall be complete with all lining
material like fevicol, nails etc. with labour &
providing and fixing of leatherite/ tapestry. Legs
shall be out of wooden. Fixing of system by machine
stitches and spray gluing system. Leatherite/
Tapestry shall be as per approved colour/ shade/
texture by the Engineer in charge. Sofa shall be
finished with melamine polish and completed as per
Design detail drawings and/or given by the
Engineer -in charge.
106 Providing and Arranging Rectangle Center table 1.00 No. 5807.50
made from 1180mm x 600mm x 419mm C.P.
teakwood leg and 19mm thick plywood structure
and finished with 1mm thick laminate & top part of
table covered with 18mm thick Granite top with
edge finish All eposed sedges shall be covered with
8mm thick teak wood beading patti & exposed
wooden & veneer faces to be dinished with matt
finish melamine polish & non visible faces & edges
shall be painted with enamel paint of matching
shade of other finished surfaces including all
materials and labours etc. complete as per drawing
and instruction of engineer-in charge.
107 Providing and Arranging Cornor table made from 1.00 No. 5226.75
900mm x 900mm x 419mm C.P. teakwood leg and
19mm thick plywood structure and finished with
1mm thick laminate & top part of table covered with
18mm thick Granite top with edge finish All eposed
sedges shall be covered with 8mm thick teak wood
beading patti & exposed wooden & veneer faces to
be dinished with matt finish melamine polish & non
visible faces & edges shall be painted with enamel
paint of matching shade of other finished surfaces
including all materials and labours etc. complete as
per drawing and instruction of engineer-in charge.
108 Earthwork for embankment including watering and 1369.00 Cum. 182.14
consolidation with breaking clods, dressing with an
all lead and lift.
109 Providing and laying compacted W.B.M. 150mm 36.00 Cum. 1246.34
thick of grade-II in two layers each of 75mm thick of
machine crushed BT metal of size 40mm to 63mm
with using 13% stone screenings of 13.2mm size
and 7% stone dust as filler including spreading
watering and consolidation by vibratory roller etc.
comp. in single layers.
13 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
110 Providing and casting in situ controlled trimix 36.00 Cum. 7070.00
cement concrete M-250 for average 200mm thick
road work laid as directed including adding super
platisizer admixture of IS make and providing and
laying M.S. side rail of road thickness with
necessary nut bolts plates fixing as per width
applying plate vibrator (electric or diesel) on
channel compressor with vacuum dewatering
system by using all necessary equipments and
materials and machinery such as running screed
vibrator on prelaid M.S. channel for leveling
,Vacume pump, floating and power towelling etc
with filling the joints with bitumen as directed etc
111 Painting lines, deashes, arrows, letters etc on 58.00 Sqm. 59.17
roads, Air fields and like in two coats with road
marking paint, brushing including cleaning the
surface of all dirt, dust and other foreign matter for
112 Distance Informatory / Destination Sign :-Providing and 1.00 No. 18254.19
fixing sign boards made out of 2mm aluminium sheet /
4mm ACP (Aluminum composite Panel); size 180x120
cms. rectangular as per design of IRC-67-2012. Pre
treated with phospheting process & acid etching; coated
with one coat of epoxy primer and two coats of best
quality epoxy paint ; reflectorised with High Intensity
Prismatic Grade retro refiectivesheeting of Type-4 as per
ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2
Nos.) long stand post of Iron Angle 75 x 75 x 6mm / 65NB
Circular MS Pipe as required and frame fabricated from
suitable size iron angle of 50 x 50 x 5mm; painted with
bestquality epoxy coatings in black and white bends. The
details of symbol for each board shall be as per the
instruction of engineer in charge. The fixing at site shall
be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg
including excavation, curing etc.complete under the
supervision of engineer in charge. A warranty for 7 years
for the Retro reflective sheeting from original
manufacturer & a certified copy of 3 year outdoor
exposure test report from third party test lab for the
product offered shall be submitted by contractor. (B)
Class-B Type-4 Retro Reflective sheeting
113 Providing and fixing cattle trap of required size and 9.00 Sqm. 9072.83
design by providing GI pipes 50mm dia at 10 cm c/c
including providing “c" chanels 100x50x6x6mm size
including necessary excavation 10 CM thick CC
1:2:4 for foundation complete CC wall of CC 1:2:4
with cement plaster 15mm thick in CM 1:4 etc.
complete as directed by Engineer – in – Charge.
114 Providing and fixing RBT fencing with punched 70.00 Rmt. 365.62
tape concertina upto 3 m height of wall with angle
iron ‘Y’ shaped 40 x 40 x 5mm placed 2.4 m or
m apart and with 6 horizontal R.B.T. reinforced
barbed wire,stud tied with G.I. staples and G.I.
clips to retain horizontal, including necessary bolts
or G.I. barbed wire tied to angle iron, all complete
as per direction of Engineer-in-charge, with
reinforced barbed tape(R.B.T.) / Spring core
(2.5mm thick) wire of high tensile strength of
kg/ sq.mm with tape (0.52 mm thick) and weight
43.478 gm/ metre. (Cement concrete for fixing
angle will be paid under seperate item)
14 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
115 Preparing the existing land /soil and removal of 49.00 Sqm. 24.74
unserviceable soil, stone ,unwanted vegetation and
disposing of the same as directed.
116 Preparing the land by filling fertile/ selected garden 49.00 Sqm. 77.77
soil, including leveling & fine dressing and mixing
manure/bio tech fertilizer/ fertilizer and termite
treatment as per requirement.
117 Plantation of carpet type lawn including labour 49.00 Sqm. 57.57
materials , watering and growing etc. as per
instruction of EIC.
118 Plantation of flower bed with selected flower plant 49.00 Sqm. 232.30
including planting the same at 45 CM apart and
growing the same including as per instruction of
119 Planting of hedge with selected hedge plant like 36.00 Rmt. 154.53
Golden , Duranta, Red Bhaji or selected plant @
CM apart as per instruction of EIC.
120 Planting of selected shrubb trees like Ticoma, 10.00 No. 64.64
Nerium or other selected plant including preparing
pit of size 30 x 30 x 30 CM and filing with selected
garden soil including manure, fertilizer and as per
instruction of EIC.
121 Providing Three plants having minimum 2.00 mt. 20.00 No. 64.64
hight and healthy growth of various kinds as like
peltroform, Gulmahore, Karanj, Ambla, Rain tree,
Sapparni, Cherry, Cryjeliya, Spethodiya, Paras
Pipala, Garmali, Neem, Borsalli, Kadam, Buch,
Chanpo, Asopalav and as suggested etc.
122 Providing tree plants having minimum 2.00 mt 6.00 No. 1742.25
height and health growth of bottle palm tree, Cycus
palm and other palm tree planting including 30 x
x 30 Cm. pit filling with selected garden soil
including manure, fertilizer as per instruction of
123 Providing and fixing 1.25 x 0.65 granite Top and 3.00 No. 3484.50
0.45cm Ht Kota stone sandwich type seating
benches with Molding , edge as per Design drawing
including fixing on site as directed.
Total of Civil Items (A) Rs.
(B) Electrical Work
124 Point wiring for Tissino / Modular secondary light 5.00 Pt. 120.19
point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multi strand copper wires, in below
type of pipe to be erected complete with earth
continuity and necessary connection with primary
light with accessories erected on Metal / PVC /
wooden box covered with 3 mm thick
PC(Polycarbonate) / Acrylic sheet for open /
concealed wiring. with necessary Lamp holder /
ceiling rose / H.D.Connector as directed.Note:-
Maximum up to 6 mtrs length, excess will be
considered as Mains for Secondary Point. (j) in
existing pipe erected concealed in wall/ceiling
15 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
125 Point wiring for Light / Bell with 2-1.5 sq.mm & 24.00 Pt. 410.06
earth wire of 1.5 sq.mm (Green) both are of ISI
marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below
type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of
following type, erected on PVC / Metallic/Wooden
box, single mounting base frame covered with
textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose /
H.D.Connector as directed.(j) in existing pipe
erected concealed in wall/ceiling complete. Cat. III
126 (j) in existing pipe erected concealed in wall/ceiling 6.00 Pt. 205.03
complete. Cat. III (For point wiring in bathroom and
W/C and washbasin area in residential quarters
reduce overall rate by 50% of point wiring for light.)
127 Point wiring for FAN with 2-1.5 sq.mm & earth wire 5.00 Pt. 556.51
of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV
Grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe
erected with 6A Modular type switch and hum free
EME step type electronic fan regulator mounted
and accessories with earth continuity of following
type erected on PVC / Metallic/Wooden box, single
mounting base frame covered with
textured/metallic/white front plate modules erected
on / in wall / ceiling as per pipe erected. with
necessary ceiling rose / H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling
complete. Cat. III
128 Point wiring for Individual Plug with & earth wire of 7.00 Pt. 567.62
1.5 sq.mm (Green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper
wires up to 10 mtr length, in below type of pipe
erected complete with Modular type switch & 5 pin
Plug erected on PVC / Metallic/Wooden box
covered with appropriate front plate modules
erected on / in wall / ceiling as per pipe erected with
following type of accessories.[II] For 16A Plug and
16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb
db board. (j) in existing pipe erected concealed in
wall/ceiling complete. Cat III
129 Point wiring for on board Looped Plug with 6A 14.00 Pt. 257.55
Modular type switch & 5 pin socket erected on PVC
/ Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling with following
type accessories Cat. III
16 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
130 Point wiring for Two Way Controlled Light Point with 5.00 Pt. 514.09
2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both
are of .ISI marked 1.1 KV grade FRLS PVC insulated
multi strand copper wires erected in below type of
pipe with 6A Modular type switches and following
type of accessories erected on PVC /
Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary batten/angle holder or
ceiling rose or H.D.Connector as directed.(j) in
existing pipe erected concealed in wall/ceiling
131 Providing following type of Modular Type 1.00 Ea. 160.59
Accessories mounted with PVC / metallic/Wooden
box, single mounting base frame covered with
textured / metallic/white front plate , modules
erected with necessary connections as per site
situation directed by Engineer In charge. (4) TV Co-
axial Socket outlet Cat.III
132 (5) Electronic hum Free steps EME Fan regulator 2.00 Ea. 398.95
133 (7) Blank Plate Single Cat.III 3.00 Ea. 25.25
134 (10) 16Amp. Universal socket.Cat.III 2.00 Ea. 199.98
135 (14) 16A Double Pole Modular MCB Switch Cat.III 2.00 Ea. 410.06
136 Providing and erecting ISI mark Medium class 119.00 Mtr. 33.33
RIGID PVC PIPES of following size complete to be
erected on/in wall or ceiling erected with
necessary PVC fittings & Junction boxes fixed with
adhesive solution & Clamps with following dia of
pipes, in approved manner as directed (b) 25 mm
137 Providing and erecting Mains with 1.1 KV grade 72.00 Mtr 62.62
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with
1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of
following size. (E) in existing pipe. (b) 2 wire 2.5 sq.
138 providing and erecting Mains with 1.1 KV grade 66.00 Mtr 86.86
FRLS PVC insulated ISI marked stranded Copper
conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of
green colour for earth continuity of following size.
(E) in existing pipe. (a) 2 wire 4 sq. mm
139 (E) in existing pipe. (c) 2 wire 10 sq. mm 12.00 Mtr 211.09
(use earth wire of 4 sq.mm )
140 Supplying and erecting Flexible PVC insulated multi 22.00 Mtr 46.46
strand multi core 1.1 kv grade ISI marked copper
wires of following size to be erected as directed. (e)
1.50 Sq.mm 3 core round PVC sheathed
141 Providing & Erecting approved make following size 25.00 Mtr 39.39
of TV Co-axial flexible cable comprising inner
conductor of solid bare copper insulated with Foam
PE & Secondary conductor made of poly -
Aluminium film bonded Al. Braids @ suitable
coverage overall sheathed with black PVC
insulation. (b) RG-6
142 Bakelite adopter for Holder to be erected. 5.00 Ea. 9.09
17 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
143 Decorative call bell Ting-tong box type 250 volts 1.00 Ea. 71.71
complete erected
144 Supplying and erecting LED indoor fittings with 5.00 Ea. 373.70
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS:
513/CRCA/ aluminium die cast powder coated and
high U.V. & corrosion resistance with diffuser with
company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%,CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED driver
efficiency > 85 % (fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Tube Light with
integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,
conventional 4 feet Cat-lll
145 Supplying and erecting LED indoor fittings with 20.00 Ea. 427.23
LEDs of wattage 0.2 Watt to 0.5 Watt assembled on
single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder
coated and high U.V. & corrosion resistance with
diffuser housed in aluminium casted body with
company mark/name 160V to 270V,Power Factor
more than 0.95, THD < 15 %,CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt,LED driver
efficiency > 85 % ( fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)(A) Square/ Circular
shaped Surface/Recessed Mount Downlight with
provision for spring loaded mounting clips
complete.IP20.(ii) 15 watts, Surge-2 KV Cat III
146 (G) Step Light having Aluminium die cast and ABS 8.00 Ea. 573.68
Plastic material.(i) 5 watts, Direct/Indirect
luminaire.Cat III
147 (H) Mirror Light 9 Watts, wall mounted minimum 1 2.00 Ea. 312.09
18 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
148 Supplying and erecting LED street light / Flood light 8.00 Ea. 5599.44
fittings with High power White LEDs wattage of
Watt and above assembled on single MCPCB,
efficiency more than 130 lm/w and corrosion free
High pressure die cast aluminum housing with
smooth finish powder coated and heat sink
extruded aluminium with diffuser and
Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD <
10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver
efficiency > 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)(B) Flood Light (IP-65),
Surge protection -4KV integral and ,Light must have
440VAC line supply with over-voltage protection. (ii)
50 to 60 Watts.Cat III
149 (C) Post Top Lantern LED fitting comprises of finish 2.00 Ea. 4819.72
cast aluminum spigot and spun aluminum canopy
fixed with opal polycarbonate, pipe arrangement for
vertical mounting driver and accessories wired
upto terminal block.IP 65 (ii) 40W Cat-lll
150 Supply of Approved make Iron Clad or metal clad 1.00 Ea. 1275.63
four pole change over switch 415V. confirming to IS
of following capacity (B) 32A Cat. II
151 providing and erecting Miniature circuit breaker 10.00 Ea. 270.68
single pole 2A system and having breaking capacity
10 KA to be erected in existing box. confirming to IS
8828/1996 with ISI Mark.Cat III
152 providing and erecting Miniature circuit breaker 8.00 Ea. 112.11
single pole 10 A to 25A suitable to operate on 240 V
A.C. system and having breaking capacity 10 KA to
be erected in existing box. confirming to IS
8828/1996 with ISI Mark Cat.III
153 Providing & erecting 240 V MCB double pole switch 2.00 Ea. 295.93
for lighting Load (B Curve) having 10 KA breaking
capacity & confirms to IS : 8828 in existing box
having following capacity.(B) 40 Amp. Cat.III
154 Sheets steel powder coated enclosure suitable for 1.00 Ea. 176.75
incorporating One/Two nos. MCB.
155 Providing and erecting Sheet Steel powder coated 1.00 Ea. 1492.78
MCB distribution board - flush / surface mounted
fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &
without MCB to house appropriate nos. of
MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (A) single phase
incoming and horizontal single phase outgoing (b)
sheet steel double door (IP-43) (iv)12 way
19 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
156 Providing and erecting Approved make RCCBs 1.00 Ea. 2235.13
conforming to IS: 12640 and having sensitivity of
mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase
V,50Hz. having characteristic of quick action &
tripping with all advance feature & do not
incorporate any electronic component. for following
Max. rating erected as directed (ii) 40Amps. DP
157 Providing and erecting Annealed bare Copper wire 1.00 Kg. 794.87
158 Supplying & erecting earth pit of minimum bore 1.00 Ea. 4591.46
dia.150mm size approved make Earthing Electrode
consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200
Micron galvanising, Inner pipe dia of 25 mm having
200-250 Micron galvanising, connection terminal
dia of 12mm with constant ohmic value surrounded
by highly conductive compound with high charge
dissipation suitable for following type of
applications with chamber and heavy duty cover.
(A)(approved make OEM has to submit test
certificate including value of earth resistance of
installation duly stamped and signed by agency and
officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having
back filling compound of (B) Inner chemical (CCM
Compound)- Resistivity:- 0.2 ohm / meter testing as
per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill
Compound :- Earthing compound should be
capable to retain moisture for long time Necessary
test report must be submitted by Agency. (a) For
Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
159 Providing and erecting XLPE(IS:7098)(I)-88 ISI 100.00 Mtr. 92.92
armoured cable Aluminium conductor for 1.1 KV. to
be laid on wall with necessary clamps or in existing
trench / pipe of following size of cables. (B) 2 core
160 Making trench in soft soil of suitable width of 90 cm 12.00 Mtr. 55.55
deep for laying cable or locating the fault all over
the run and back filling the same and making the
surface as normal ground.
161 Making trench in Hard Murrum / Tar Road of 10.00 Mtr. 74.74
suitable width of 90 cm or required depth for laying
any size of cable or locating the fault all over the
run and back filling the same and making the
surface as normal ground.
162 Supplying following size of Light duty “A” Class G.I 10.00 Mtr. 471.67
. Pipe & erecting as directed by Engineer-in-
charge. (C) 80 mm dia.
163 Providing & laying approved make Double walled 24.00 Mtr. 62.62
corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with
necessary connecting accessories of same
material at required depth in existing trench for
laying of cable. below ground / road surface for
enclosing cable (A)50 mm outer dia
20 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
164 Providing & laying approved make ISI marked 195.00 Mtr. 163.62
HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-
80 to be erected at road crossing on or floor as
directed for laying of cable. The pipes as following
size of dia & weight per 6 mtr.(B) 50 mm inner Dia.
165 Providing & erecting Approved make Power Saving 7.00 Ea. 1948.29
50 Watt Ceiling Fan with double ball bearing ISI
mark with Condenser 230 volt A.C. 50 Hz 1200 mm
sweep complete having 3blades with aluminium
blades with , canopy & 30 cm. down rod erected
with earthing.(Make shall be approved by Engineer
166 Supplying & erecting fan hook box of 10 mm M.S. 7.00 Ea. 108.07
round bar bounded to the RCC bars up to 50mm
length each side and pierced through a 16 Gauge
M.S. box / Heavy Duty PVC box complete erected
concealed in Ceiling with necessary finishing.
167 Providing 2.5mm.thick laminated acrylic sheet to 7.00 Ea. 18.18
cover the fan hook or Fan box.
168 Supplying & erecting approved make low noise 3.00 Ea. 1366.53
decorative exhaust fan having square frame ABS
body with inbuilt lowers & square frame.250mm
with 1350 RPM Cat.II
169 Supplying & erecting approved make SMC press 10.00 Ea. 476.72
moulded composite FRP. loop-in, loop-out approx.
2mm thick box complete with Bakelite connector
strip 5way(3P+N+E),DIN rail for mounting mob &
hinged doors as per requirement having locking
arrangements with mounting clamp with nuts, bolts
& washers suitable for erection on pole with cable
clamps& earth bolt of following size of box.
(C)150mm x 125mm x 100mm [deep]
170 Supplying and erecting insulated pair of soft copper 22.00 Rmt. 965.56
tubing open or concealed including power and
control cable,necessary PVC drain pipes for Split
AC machine up to 4 TR capacity
171 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 18.00 Mtr 129.28
mm thick.nitrile rubber insulation.(A) 50 mm dia.
172 Supplying and erecting horizontal / vertical 2.00 Ea. 7808.31
mounting type storage water heater with copper
container housed in M.S./S.S./ABS body insulated
with glass wool/puff complete with heating
elements,adjustable thermostats 300C to 850C,
indicating lamp, safety valve, fusible plug,
etc.complete erected with coach bolts, nuts.
washers & cementation (B)15 Ltr-.with 2 /3K.W.
heating element Cat.III
173 Providing & erecting open well horizontal mono 2.00 Ea. 10734.28
block pump set with cast iron body, complete for
three phase submersible motor having. [B] For 2 HP
3 phase open well horizontal mono block pump set
suitable for 200 LPM @ 25 mtr head suitable for
mm dia delivery pipe Cat.II
21 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
174 Supplying & erecting approved make motor 3.00 Ea. 7722.46
control cubical panel (Direct - on - line) made from
16 G. CRCA sheet duly epoxy powder painted inside
and outside with hinged doors and locking,
arrangement consisting of suitable size of ON- OFF
isolator (AC - 3/23duty) main fuses, single phasing
preventer, indicating lamps for R- Y - B phases,
overload relay, Automatic water level controller,
Ammeter, Voltmeter each with two way selector
switch incoming, wires duly socket crimped, main
contactor & overload relay, start - stop push
buttons, to be erected on angle iron frame grouted
on wall as directed. The isolator, overload relay &
contactors will be of L & T, Siemens or BCH make
only.(A) DOL up to 5.0 H.P.
175 S.I.T.C. submersible pump set suitable for bore of 1.00 Ea. 26894.28
100 mm. dia. or more having three phase motor
capacity 5 H.P. with following capacity . Lifting and
Lowering taken extra.(A) (25 stage) 120 to 125 LPM
discharge at 155 to 120 mtrs. head respectively
suitable for 50 mm dia. delivery pipe.Cat III
176 Lowering of submersible motor pump set at the 1.00 Per Job 2996.67
depth of following ,complete with required. Nos.
and size of casing pipes erected by means of
proper chain pulley block & pipe wrenches after
checking of threads of each pipe with coupling to
take the load of the pump set and pipe assembly
filled up with water.(C)Above 120 mtr.
177 Providing and erecting ISI marked PVC insulated 209.00 Mtr. 146.45
PVC Sheathed Flat flexible Submersible copper
cable approved make of following Size. (C) 3 Core x
178 Providing Water proof straight Joint in PVC 3.00 Ea. 278.76
insulated flat flexible copper cable by using
insulating material, water proofing material, &
making the joint complete. (B) 16 to 35 Sq. Mm
179 Supply of following size of TOP & BOTTOM 1.00 Per Set 1489.75
accessories i.e. Adaptor set (CI) long, pump guard
set, starter pipe Rubber ring for submersible pump
& UPVC column pipe as directed by Engineer - in -
charge with necessary plumbing as desired.[D]
180 Supply, Installation, Testing & Commissioning of 7.00 PER KW 44081.45
following size of Grid Tied Solar Power Plant with
Solar Panels (ALMM approved): Frame Material :
Anodized Aluminum alloy Frame With Twin Wall
Profile, Front Cover : High Transmission Low-Iron
Tempered Glass (AR Coated), High efficency and
positive power tolerance Pmax: 0/+5, Module
Efficiency should be approx. 19.5%-22%, Normal
operating temperature 45'C, Junction Box with
Waterproof IP67 & MC4 Compatible and Enclosed
with Bypass diodes, 100% Electroluminescence test
to ensure error free Modules, Thep. temp. co-
efficient of the PV module shall equal or better than -
0.45%/degree C. Solar PV modules of minimum fill
factor 75% to be used. Unit Production:- More than
4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year
Product warranty and 25 year Linear Power
22 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
includes all mechanical and electrical parameters
of the Solar panel. Modules must be complied to the
DCR(Domestic content requirements). The Ration of
AC to DC is 5:6 for the Installation capacity which
are given in AC KW.
Solar Inverter: MPPT Range: MPPT Range: 80-1000
V , Max efficiency: 97.5% - 98.9%, O/p Frequency:
50/60Hz, Operating Altitude (m) ≤4000, O/p Power
Factor: ~1, O/P THDi: <3%, Operating Tempreture
Range: -25~60°C, Integrated protection of Inverter
are Anti-islanding Protection, Input Reverse
Polarity Protection, Insulation Resistor Detection,
Ground fault protection, Residual Current
Monitoring Unit, Output Over Current Protection,
Output Short Circuit Protection, Output Over
Voltage Protection, PV array string fault Protection.
Protection Degree: IP65, User Interface LCD &
APP, Datalogger & Communication: GPRS / Wi-Fi.
Integrated, Input Reverse Polarity Protection
Integrated, Insulation Resistor Detection
Integrated, Residual Current Monitoring Unit
Integrated, Output Over Current Protection
Integrated, Output Short Circuit Protection
Integrated, Output Over Voltage Protection
Integrated, Protection Degree: IP65, User Interface
LCD & APP,Datalogger & Communication: GPRS /
Wi-Fi, Module Mounting Structure: The mounting
(Rectangular pipe / square pipe / circular pipe) with
requisite cross bars, nuts and bolts, etc. shall be
Hot deep galvanized with minimum 80micron
coating. The Rectangular / square /circular hollow
pipe section used for the structure should have a
minimum thickness of 2.0 mm. other than above, the
material thickness should be minimum 2.5 mm. A
certificate of a structural engineer certifying the
strength and stability of the mounting structure to
withstand the weight and wind speed of
km/hour throughout the life span of 25 years of the
system, shall be submitted by the vendors.
23 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
Hot Dipped Galvanized steel coils. suitable
arrangement for base plate for foundation , solar
panel mounting, the structure should be suitable for
carry the load of solar panel,wiring, sprinkler
system etc. with necessary foundation work/wall
mount, j bolt, anchor fastner etc. the nut bolt used
for installtion of stucture should be (SS 304)
quality.The ground clearance of the bottom most
edge of solar panel shall not be less than 300 mm to
1200 mm or as per site’s technical/feasibility
a. Column –The minimum section (thickness) should
be 60MM*40MM b. Rafter - The minimum section
(thickness) should be 60MM*40MM c. Purlin - The
minimum section (thickness) should be 40MM *
40MM Balane of System with necessary Swichgears
(Suitabel size and protection of ACDB & DCDB),
inter connecting wiring, earthing system as per the
CEIG drawing approval, lightining arrester system
as per the CEIG drawing approval, all liasoning
work with various gov. dipartment like state nodal
agency,DISCOM & CEIG is included in agency
(Excluding All charges namely GEDA Application
fees, Solar connectivity Charges, Meter
connectivity Charges, Meter testing Charges and
system stability/strenthning charges.) (B) Grid Tied
Solar Power System: 7 - 10 kW (3 - phase)
Total of Ele Items (B) Rs.
Total of (A)+ (B) Rs.
Amount of my tender work out as under
I / We am/are willing to carry out the work at ………………………………………….. % above / below Percent
[should be written in figures and words] of the estimated rates mantioned above. Amount of my/our
tender works out as under
Estimated Amount Put to tender: Estimated Amount Put to tender:
Deduct % below Add % above
Net Rs. Net Rs.
In words : In words :
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Jamjodhpur (R&B) Sub Division Jamnagar (R & B) Division,
Jamnagar Jamnagar.
24 of 25 DTP of D type Qtr 04-26
Sr. Description of Item (With brief specification Quantity Unit Rs. In figure Amount
No. and reference to book of specifications)
1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification and
other specification of the Division or as Directed.
2) All the columns in Schedule should be filled in INK and the total of the entries in the last column
should be strike out by the Contractor under his Signature.
3) Rates should include clearance of site (Prior to commencement of work and its close) in all
respect and good for work under all conditions of site moisture weather etc.
4) The Contractor shall exhibit the details of works, Tenders amount and specification as per Govt.
Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as directed by
Engineer-in-Charge of the works, on board at site of the work.
5) Contractor shall even "NIL" percentage, if no deduction is offered.
6) Testing of materials shall be as per statement attached with the specification. The material shall
be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of amount put
to tender after deducting the cost of materials to be supplied by Department as per SCHEDULE 'A'
at the sanctioned estimate rates from the Contractor in Running Bills. (As per G.R.No. (R&B) TNC-
1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No. SSR/10000092-IB-12910-C Dt. 16-
7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the
difference of cement consumption shall be deducted from rate of original item at the rate of star
rate mentioned in the tender.
8) 1% L.C. shall be deducted from the bill as per agreement.
9) GST will be paid extra as per Govt. Emendment.
10) GST and Income tax will be deducted at source while making payment of bills
Signature of Contractor
Deputy Executive Engineer Executive Engineer
Jamjodhpur (R&B) Sub Division Jamnagar (R & B) Division,
Jamnagar Jamnagar.
25 of 25 DTP of D type Qtr 04-26
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Building Specification Booklet Page-192.pdf
Civil work specification of D type Qtr 04-26.pdf
ELE Specification -Cat.D Type Quater at Lalpur with Make List.pdf
E-Tender-6.pdf
index to specification of D type Qtr 04-26.pdf
List of Electrical material.pdf
Main page and GR.pdf
Performance Bond and Bitumen date.pdf
Price bid of D type Qtr 04-26.pdf
SBD - Annexure - Const. of D-Type 1 Unit Lalpur.pdf
SBD of D type Qtr 04-26.pdf
Testing of D type Qtr 04-26.pdf
Download all tender documents and submit your bid