CA NO GE SOUTH AMB 55 2021 2022 REPAIR REPLACEMENT OF DOOR WINDOWS VENTILATORS AND MISC JOINERY ITEMS AT SHAITAN SINGH ENCLAVE AND FAFA OFFRS QTRS AT MANEKSHAW ENCLAVE UNDER GE SOUTH AMBALA CANTT

Amount

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (without taking off shutters from frames) and removing from site, including cutting holes in wall / concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish complete all as specified and directed.

Description all as per Srl item No 1.00 above but area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed.

Taking down shutter of any descritption exceeding 1.00 sqm but not exceeding 2.00 sqm each including removal from site complete all as specified and directed.

Taking down shutter of any descritption not exceeding 1.00 sqm each including removal from site complete all as specified and directed.

Supply and fixing of steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30 mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable including guard bars 10 mm square bar and PCC (C-O ,1:3:6 using 12.5 graded agg) bed blocks for hold fasts, complete all as specified and directed. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery , grills 10 mm square bars. (iii) Only Glazing, wire mesh & painting grill shall be measured & paid for separately)

Supply and fixing of factory made mild steel windows or ventilators, fixed type, with glazing bars, complete all as specified and directed.

Supply and fixing of sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified and directed.

Supply and fixing of pressed steel frames for doors of size 105 x 60mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 3 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each shutters of frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Supply and fixing of pressed steel frames for doors of size 125 x 60 mm, 1mm thick, with one or more rebates including, hold fasts of 25mm x 4mm FI, 25cm long, 6 Nos in each chowkhat, necessary lugs, 6 Nos 100 mm MS butt hinges medium weight, cold rolled, welded for each frame, lock strike plate, including sanding, tarring backs of chowkhats, PCC 1:3:6 type C-0 filling in frame and for holdfast, 2 Nos 12 mm dia MS tie bars at the bottom of frame and one shop coat of red oxide primer etc complete all as specified and as directed.

Supply and fixing of IInd class (hollock) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply and fixing of galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to joinery when fixed in panels of joinery, complete all as specified and directed.

Supply and fixing of factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 100 mm size complete all as specified and directed.

Supply and fixing of butt hinges, medium weight, cold rolled, mild steel, ISI marked 75 mm size complete all as specified and directed.

Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 200mm long complete all as specified and directed.

Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 150mm long complete all as specified and directed.

Supply and fixing of aluminum anodized, barrel tower bolts of extruded section 100mm long complete all as specified and directed.

Supply and fixing of aluminium anodized pressed handle, fabricated type of size 150 mm long complete all as specified and directed.

Supply and fixing of aluminium anodized pressed handle, fabricated type of size 100 mm long complete all as specified and directed.

Supply and fixing of 150mm long floor door stopper of aluminium alloy body & tongue anodized with hard drawn steel spring complete all as specified and as directed.

Supply and fixing of 2nd class hardwood small fittings such as brackets of any type, latch and hinge block, shaped door and window stops and the like including all labours articles not exceeding 200 cucm each complete all as specified and directed.

Supply and fixing of 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and labour for preparing new or previously untreated wood or wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed.

Supply and fixing of factory made solid PVC panelled door shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face all as per specification & drg complete all as specified and directed.

Supply and fixing of 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in , cup board shelves etc including dismantling boarding, any description, fixed in any position with nails etc; complete all as specified and directed.

Supply and fixing hasp and staple 150 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixing screws, complete all as specified and as directed.

Supply and fixing in repair 2nd class hard wood (sal) plain fillet square rectangular or tringular in section clean swan secured with nails or brads sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and as directed.

Supply and fixing in repair 2nd class hard wood (sal) plain fillet, bullnosed, splayed, chamfered or rounded on one edge, clean sawn, secured with nails, sectional area exceeding 3 sqcm but not exceeding 6 sqcm complete all as specified and as directed.

Supply and fixing of aluminium anodised curtain rod 20mm dia as in cupboard, complete as specified and directed.

Supply and fixing of kitchen cabinet in required sizes at site made out of 18mm thick lead free one side lamination and other side balancing lamination sheet. Sheet & provision of sutters make out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. The panel shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick edge bending tape or 90 degree edge bent finish as per make specification complete including taking down existing cabinet of any type & any description complete all as specified and as directed.

Supply and fixing of mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc; not exceeding 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete including dismantling existing mild steel work complete all as specified and as directed.

Supply and fixing of continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete all as specified and as directed.

Supply and fixing hasp and staple 100 mm, aluminium anodised, safety type, with mild steel hinge pin, including bolt to hinge plate and fixing screws, complete all as specified and as directed.

Supply and fixing 40 mm dia cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply and fixing in repairs mild steel harrison rail, chromium plated with fixed brackets, stops, rollers etc complete all as specified and as directed.

Supply and fixing of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fixing of powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc; complete all as specified and as directed.

Supply and fixing of powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing of 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing of wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

Supply and fixing in repair aluminium die cast body door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

Supply and fixing of solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete including taking down wall existing panelling with fillets and similar work any type of any description complete all as specified and as directed.

Supply and fixing of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Material and labour for brick work with sub class 'B' (old size) bricks, straight or curved on plan, exceeding 6 mtr mean radius built in CM 1:6 including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair face of brick work , concrete surfaces in cement mortar 1:6 finished even and smooth without extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

Supply and fixing of 28mm thick factory made for Co-extruded three layer rigid PVC foam sheet (single extruded with density not less than 600 Kg/cum outer layer 1mm thick to be rigid UPVC with density not less than 1400Kg/cum manufactured by an ISO certified company complete all as specified and directed. Note : The door should be water proof, termite proof, fire retardant and having good retardant and having good screw holding capacity and confirmign as per IS 4020.

Supply and fixed Solid PVC/WPC single extuded door frame of size 100mm x 63mm (Single extruded process) material with density 780 Kg/cum and manufacture by an ISO certified company complete all as specified and directed. Note : The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity

Supply and fixed Solid PVC/WPC single extuded door frame of size 125mm x 63mm (Single extruded process) material with density 780 Kg/cum and manufacture by an ISO certified company complete all as specified and directed. Note : The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity

Supply and fixing in repair aluminium anodised, 200mm long barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing in repair aluminium alloy, anodised, sliding door bolt, 250mm long, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia including fixing bolts and nuts complete all as specified and as directed.

Supply and fixing in repair aluminium alloy, anodised, sliding door bolt, 300mm long, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia including fixing bolts and nuts complete all as specified and as directed.

Supply and fixing in repair bolt-sockets (or thimbles) for letting into stone, brickwork or concrete (to suit round or square shoots) including cutting mortices and cementing in, complete all as specified and as directed.

Supply and fixing in repair 75mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fixing in repair 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fixing in repair continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of flap 40mm when open) complete all as specified and as directed.

Supply and fixing in repair mild steel 200mm tee hinges, stove enamelled black, medium type, and fixed complete all as specified and as directed.

Supply and fixing in repair 125mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed.

Supply and fixing in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixing in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete if fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete all as specified and as directed.

Supply and fixing in repair 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fixing in repair mild steel Casement stays, size 300mm, with hinged joint and two plates, with studs complete all as specified and as directed.

Supply and fixing in repair mild steel Casement stays, size 300mm, with hinged joint and two plates, if fixed to steel sashes, including drilling ncessary holes or welding complete as in repairs

Supply and fixing in repair brass Wardrobe hooks (single) 50mm to 60mm complete all as specified and as directed.

Supply and fixing in repair mild steel 40mm dia, knobs with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

Supply and fixing in repair 100mm aluminium Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing in repair mild steel fancy type decorative powder coated curtain rod 25mm bore ,coloured with and including MS powder coated brackets, polished knobs at ends and PVC rings of 1st quality complete all as specified and as directed.

Supply and fixing in repair 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing in repair aluminium die door closer hydraulically regulated, universal type, suitable for door shutters 851 to 1000mm in width complete all as specified and as directed.

Supply and fixing in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Repair related related to welding repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying Welder and helper for welding of n exc 6mm thick and not exceeding 2.5cm in lenth complete all as specified and as directed.

Repair related related to welding repair works such as repair to grills, guard bars, steel windows and steel door etc., by deploying Welder and helper for welding of exc 6mm and not exceeding 9 mm thick and exceeding 2.5 cm and not exceeding 5.0 cm in lenth complete all as specified and as directed.

Supply and fixing in repair 2nd class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing complete all as specified and as directed.

Material and labour for securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and as directed.

Description all as per item No 76.00 but securing glass in metal frames complete all as specified and as directed.

Supply and fixing of sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, including hacking out existing sheet glass any description complete all as specified and directed.

Supply and fixing of ground or obscured or frosted, on one side sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, including hacking out existing sheet glass any description complete all as specified and directed.

Supply and fixing of sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane, including hacking out existing sheet glass any description complete all as specified and directed.

Material and labour for resecuring 12 mm thick, toughned glass as in hinged doors partitions, automatic dooor and similar work including cutting to shape drilling holes required fized with required accessories complete all as specified and as directed.

Material and labour for resecuring without taking down chowkhats or frames not exceeding 1.5 sq. m each complete all as specified and as directed.

Material and labour for resecuring without taking down chowkhats or frames exceeding 1.5 sq. m and not exceeding 4.0 sqm each complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting without taking down shutters of description wooden/steel not exceeding 1.00 sqm each complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting without taking down shutters of description wooden/steel exceeding 1.00 sqm not exceeding 2.0 sqm each complete all as specified and as directed.

Material and labour for resecuring or easing & adjusting without taking down shutters of description wooden/steel exceeding 2.00 sqm each complete all as specified and as directed. Notes for item Nos 51 to 86:- Contractor or his representative on daily routine basis note the details of complaint from office of the Engineer -in -Charge for attending the same and shall report thereafter after completion of compaints.

Note : - Amount of credit of Rs. 1,93,289.50 for retrieved materials is mentioned in Schedule of Credit Page No 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.

P.G.INFRASTRUCTURE

m/s parmod kamar

Ashwani Kumar