Construction of dining hall

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead - Brick work

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead - RCC Work

Demolition and disposal of unserviceable materials within 100 meters lead - Unreinforced cement concrete up to 15 Cms thickness

Dismantling, clearing away and carefully stacking materials useful for re-use, terracing work in roofs or floors - Surki or cement concrete

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10 m including all Operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil - Mechanical means up to 3 m depth

Conveyance charges for machinery for transporting earth/ sand/ gravel etc. to a distance of up to 5 KM from the site of work at the place specified by the Engineer-in-charge including loading, unloading, idle hire charges and all incidental charges etc., complete.

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm (0.54 cu.m), 20 mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Supply and placing of M 25 Design Mix Concrete corresponding to IS 456 using concrete mixer using of 20 mm HBG crushed metal 0.530 cu.m (707 kg),. 10 mm HBG crushed metal, 0.362 cu.m (471 kg) , sand 0.407 cu.m (616 kg.) and cement 380 kg with water cement ratio of 0.48 ( 182.40 ultras/ cu.m of CC) etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with cement from standard suppliers approved by the department, including cost of centering, shuttering charges and excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402).

- do - For Footings

- do - For Columns upto basement (Pedestals)

- do - For Plinth Beams

- do - For Columns in first floor

- do - For Lintel in first floor

RCC M-20 Design mix using 20 mm HBG crushed metal 0.480 cu.m, 10 mm HBG crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 kg with water cement ratio of 0.53 (185.5 Lit per cu.m of CC ) etc. horizontal plain sunshades or lofts projecting from the face of the wall 65 mm average thickness, 80 mm thick at the face of the wall and 50 mm thick at the free end and cast monolithically with the lintels or tailed to the full thickness of the wall where there are no lintels using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from any source conforming to the relevant ISI standards including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, etc.,complete, but including cost of centering charges and excluding cost of steel and its fabrication charges for finished item of work. 0.60 m width - In First floor.

Supply and placing of RCC M20 Design Mix precast slabs of 50 mm thick, using of 10 mm HBG crushed metal 0.480 cu.m, 6 mm HBG Crushed metal 0.320 cu.m, sand 0.400 cu.m and cement 350 Kg with water cement ratio of 0.53 (185.50 ultras/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, including centering charges, shuttering charges for finished item of work (APSS No. 402)

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars below 36 mm dia of Fe-500/ Fe-500D/ Fe 550 grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS No.126) (In the absence of 18G binding wire, 2 Nos of 20 G binding wire in tandem are to be strictly adhered).

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230X110X70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

- do - Up to basement

- do - In First floor

Construction of 110 mm thick Brick partition walls in CM (1:4) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. Complete - In First floor

Plastering in Cement Mortar (1:5) 12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete - In First floor

Plastering in Cement Mortar (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete - In First floor

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20 mm thick with 100 ml of Integral Cement water proof admixture complies with IS : 2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off juctions of wall and slab etc., complete for finished item - In Second floor

Providing and laying water proofing cum heat insulation treatment with Home Shield Polurethane (PU) Roofkoat (Berger or equivalent) over existing roof slab, all as directed by Engineer-in-charge and as per the following specification: - Surface Preparation: - (1) Clean the surface thoughly to make it smooth and free of any foreign material, (2) Water pounding test for Mother slab to identify the leakages points before starting the water proofing treatment work, (3) Injection grouting should be done for all leakages point indentified and inject the cement slurry dmixed with injection grout admixture, using pressure grouting machine till the rejection of material from the nozzle, (4) Reparing od construction joints by chasing with cutting machine and fill the same with polymerized mortor in CM (1:4) admixture with Advanced Latex plus as per the specified company instructions.

Water proofing Application with PU Roofkoat: - (1) Apply a self-priming coat of PU Roofkoat after diluting with clean water @ 50% (1:0.50), (2) Allow to dry for 4 to 6 hours, (3) Allow 1st coat of PU roofkoat without dilution @ 0.40kg per Sqm., (3) Allow to dry for 4 to 6 hours, (4) Apply 2nd caot of PU roofkiat wuithout dilution @ 0.40 Kg per Sqm. The cost inclusive of all required materials such as Home Shield Polurethane (PU) Roofkoat (Berger or equivalent),Injection goruting with required materials, reparing construction joints with required materils and all labour charges for above activities etc., complete as directed during execution.

Flooring with Double charged (with double layer pigment)/ multi charged stain free full body porcelain vitrified tiles of size 600X600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs (as per manufacture specification), set over base coat of CM (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including white cement slurry of honey like consistency spread @ 3.30 kgs per sq.m. jointed with neat cement to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like flooring slab, cement, sand and water etc., complete, for finished item of work

Finishing the sides of walls with glazed red or white full body ceramic wall tiles of size 300X450 mm/ 320X400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kg /10 sq.m shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete.

Flooring with Antiskid Granite (Black) 18-20 mm thick upto 2.43 m set over base coat of CM (1:8) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost & conveyance of all materials, seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work.

Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.

Supplying and fixing in position MS Tubes & pipes of all diameters as per ls-1161 of approved size design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the same with two (2) coats with Synthetic enamel paint in all shades grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ liter approved make and colour over a Primary coat (Red oxide metal primer) {total three (3) coats} including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47 mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc., complete as directed during execution (Original coil shall be of make TATA Blue scope/ JSW)

Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using 12.5 mm thick Gyp Board sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm conforming to IS 2095 - 1982 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1,220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC universal holding clips system at 1,200 mm c/c and fixing the 12.5 mm/ 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supplying and fixing in position Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 35 mm thick conforming to IS:2202 of standard make with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, Single leaf using Best Indian Teak wood frames of size 75 mm X 100 mm without threshold plate, including cost of M.S "Z" Hold fasts of 230 x 50 x 6 mm, M.S Powder coated Butt hinges of 125 x 65 x 2.12 mm, screws, nails, etc., complete, (excluding cost of other fixtures which will be paid separately but including labour charges for fixing the fixtures).

Providing and fixing factory made uPVC any colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.20 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100X8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single/ double glass panes, wire mesh and silicon sealent. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92X44 mm & sash 32X60 mm both having wall thickness of 1.90 ± 0.20 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made.

Providing, supplying & fixing of top hung ventilator with exhaust fan provision made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60X55 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74X60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75X60 mm with reinforcement of 1.50 mm thickness. Glazing bead for fixing of glass shall be of size 34X20 mm coextruded with gasket. Ventilator shall be provided with 4.50 mm Pin Head glass, standard hardware, single point locking and friction stays. Wall thickness of frame, mullion and sash shall be 2.0 mm

Providing and applying wall putty for new internal or new external walls of white cement or polymer or cement based or equivalent putty of approved make average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife/ muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work excluding scaffolding charges.

Painting two coats for new internal walls with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and shade, over cement primer (water thinnable) of interior grade-I {total three (3) coats} after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 - For new internal walls.

Painting two coats for new external walls with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter over cement primer (water thinnable) of exterior garde-2 {total three (3) coats} of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 - For new external walls.

Providing Unplasticized PVC SWR Rain water downfall pipes of 110 mm dia PVC pipe with wooden block of size 150X50X50 mm with ISI:13592 Type -A mark with necessary shoes, bends, collars etc., including making holes in walls, RCC slabs, beams, columns, including fixing with necessary wooden plugs (where it is required pipe clear of wall, wooden blocks of size equal to that of ears of the pipe shall be used), screws, iron clamps of 18 G and making good the same including cost and conveyance of all materials and incidental charges etc., complete as directed during execution.

Supply of following dia PVC/SWR Pipes (as per ISI standards) 6kg/cm2 (Type-B) including labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc.,any dia including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc., with solvent jointing as per standard practice.

- do - 160 mm dia Double socket pipe

- do - 110 mm dia Single socket pipe

- do - 75 mm dia Single socket pipe

Supply of following UV Resistant UPVC/ SWR Pipe fittings (as per ISI standards) of approved make and brand

- do - 75 mm dia Plain Bend 87.5 Degrees

- do - 110 mm dia Plain Bend 87.5 Degrees

- do - 75 mm dia Door Bend 87.5 Degrees

- do - 110 mm dia Door Bend 87.5 Degrees

- do - 75 mm dia Single Tee

- do - 110 mm dia Single Tee

- do - 75 mm dia Single 'Y'

- do - 110 mm dia Single 'Y'

- do - 75 mm dia Couplers

- do - 110 mm dia Couplers

- do - 75 mm dia Vent Cowls

- do - 110 mm dia Vent Cowls

- do - 75 mm dia Pipe Clips

- do - 110 mm dia Pipe Clips

Supply and fixing 4" (101.60 mm) Nahany Trap (Without Jali with inlet) UPVC/ SWR Pipe fittings

Supply and fixing of following dia premium make CPVC Pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes) 1/2" to 2" Flowgurard SDR 13.5 Pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

- do - 22.20 mm OD Pipe - SDR 13.5

- do - 28.60 mm OD Pipe - SDR 13.5

- do - 34.90 mm OD Pipe - SDR 13.5

- do - 41.30 mm OD Pipe - SDR 13.5

- do - 54 mm OD Pipe - SDR 13.5

Supply and fixing pf Gunmetal Gate (GM peet) valves of following sizes as per IS-778 Class-I, Indian make heavy type

- do - 25 mm dia NB Size

- do - 32 mm dia NB Size

- do - 40 mm dia NB Size

- do - 50 mm dia NB Size

Supplying and fixing European ISI Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap with ISI mark or equivalent approved by the department.

Supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996

Supply and fixing of 10 Litres capacity single flush PVC low level system with internal components & short bend.

Supply and fixing of SYMET 2 in 1 Faucet (1 mts Tube) with Hook (Prayag make (Cat No.187) as directed during execution.

Manufacture, supply, delivery & laying of 300 mm dia RCC Socket and Spigot pipes NP-2 class conforming to BIS 458/ 2003 carefully into the trenches and laying them true to the alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead up to 500 metres including cost of rubber rings as per BIS No.783/ 85 as directed during execution by the Engineer in charge.

Supplying, laying, jointing and testing 101.60 mm SWG SP1 Pipes of ISI make confirming to ISI 651 & 4127 with airtight cement joints in CM (1.5:1) Prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.40 mm (3'-0") depth and refilling with watering and tamping.

Providing and placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand and manufacture with suitable cover/ cap and suitable locking arrangement and making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks