Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹97.1 LAccepted-AOC TANGLA UDALGURI ASSAM | UDALGURI | ASSAM | 784113 | L1 | Accepted-AOC L1 | |
| 2 | L2₹98.4 L+₹1.2 L (1.29%)Rejected-AOC BAJUGAON CITY TOWN GOSSAIGAON PO JARAGURI PS GOSSAIGAON DIST KOKRAJHAR PIN 783361 | KOKRAJHAR | ASSAM | 783361 | L2 | Rejected-AOC L1 | |
| 3 | Rejected-Technical GANAKPARA CITY TOWN UDALGURI P O BHOLABARI P S KALAIGAON DIST UDALGURI ASSAM PIN 784525 | DARRANG | ASSAM | 784525 | - | Rejected-Technical Not Qualified |
Tender Value
₹97.1 L
EMD Value
₹1.9 L
Closing Date
24 Apr 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Addl. Chief Engineer cum Director, PWD BTC
O/o the Addl. Chief Engineer cum Director, PWD, BTC, Kokrajhar.
Infrastructure Development of Bhergaon College, Bhergaon in Udalguri District.
2023_BTC_30372_1
ACE-35/TECH/UDL(RB)/IFB/18-19
Open Tender
Civil Works - Building
Works
365 days
Udalguri
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,000
₹1.9 L
Yes
8 Jun 2023
5 Apr 2023
24 Apr 2023
5 Apr 2023
24 Apr 2023
5 Apr 2023
5 Apr 2023 - 24 Apr 2023
Amount
2.8. Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1. All kinds of soil.
16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete: 16.12.1 With common brunt clay F.P.S. (non modular ) bricks of class designation 7.5
4.1. Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.5. 1:3:6 (1 cement :3 coarse sand (zone -III):6 graded stone aggregate 20mm nominal size)
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo- Mechanically Treated bars of grade Fe 500Dor more.
5.22A. Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500Dor more.
5.22A. Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.1 Mild steel and Medium Tensile steel bars.
5.9.3 Suspended floors, roofs, landings, balconies and access platform
5.9.7 Stairs,(excluding landings)except spiral staircases
5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement Allwork up to plinth level: 5.1.2 1:1.5:3 (1 cement :1.5 coarse sand (zone -III)3 graded stone aggregate 20mm nominal size)
5.9 Centering and shuttering including strutting propping etc. and removal of form for : 5.9.1 Foundation, footings, bases of columns, etc. for mass concrete.
5.9.6 Columns , pillars, piers, Abutments,posts and Struts
5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
5.2 Reinforced cement concrete work in walls(any thickness), including attached pilasters, buttresses plinth and string courses, fillets, columns, pillars piers, abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering, finishing and reinforcement: 5.2.2 1:1. 5:3 (1 cement :1.5 coarse sand (zone- III):3graded stone aggregate 20mm nominal size).
5.3 Reinforced cement concrete work in beams, suspended floors roofs having slope up to 15 degree landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3(1 cement :1.5 coarse sand (zone-III): 3 gradedstone aggregate 20mm nominal size).
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement :4 coarse sand)
6.13 Half brick masonry with common burnt clay F.P.S. (non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level . 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand)
10.14 Providing and fixing pressed steel door frames conforming to IS:4351, manufactured from commercial mild steel sheet of 1.60mm thickness including hinges jamb lock jamb bead and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means including M.S. pressed butt hinges 2.5 mm thick with mortar guards lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre- treatment of the surface as directed by Engineer - in -charge: 10.14.2 Profile C 10.14.2..1 Fixing with adjustable lugs with split end tail to each jamb
9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (PartI) decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/L/Type sections, made of 1.60mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.15.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x 10x10cm of C.C. 1:3:6 (1Cement:3 coarse sand :6 graded stone aggregate 20mm nominal size)
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 10.30.1 4.0mm thick glass panes
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance+_ 1mn), with wall thickness 2.0mm (=_0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x19mm and lmm(+_ 0.1mm) wallthickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer -in- charge 9.117.1 Extruded section profile size 48x40mm
Providing and fixing to existing door frames. 9.118.1 34mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24mm and wall thickness 2mm (+_0.2mm)with inbuilt adgoing on both sizes. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. TUBE OF SIZE 20X20mm and 1mm (+_0.1mm)wall thickness. The lock rail made up of 'H'section a uPVC hollow section of size 100x24mm and 2mm(+_0.2mm)wallthicknessfixed to the shutter styles by means of plastic/galvanised M.S.'U' cleats. The shutterframe with a uPVC multi- chambered single panel of size not less than 620mm having over all thickness of 20mm and 1mm (+_0.1mm)wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fadtened with nuts and washers, complete as per manufactures specification and direction of Engineer - in- charge.(For W.C.and bathroom door shutter).
12mm cement plaster of mix: 13.4.2 1:6(1cement :6 coarse sand).
13.5 15mm cement plaster on rough side of single or half brick wall of mix: 13.5.2 1:6(1cement:6 coarse sand)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding
2.25 (a)Excavating, supplying and filling of local earth (including royalty)by mechanical transport up to a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.
Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti -termite treatment (excluding the cost of chemical emulsion): 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole , 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2(1cement :2 Coarse sand) to match the existing floor: 2:35:3.1 With Chlorphyriphos/Lindane E.C. 20%WITH 1% concentration
1.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08%and conforming to IS:15622, of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.complete. 11.41.2 Size of Tile 600x600mm
11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make in colours White , Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 cement :4 Coarse sand )jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: Scoarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 13.9.1 12 mm cement plaster
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to with cement primer 11.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer.
13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: 11.41.1 Water thinnable cement primer.
13.44 Finishing walls with water proofing cement paint of required shade: 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm)
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 11.52.1 On steel work
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and Borews etc. complete: 9.96.2. 250x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary Borews etc. complete: 9.97.2. 250x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade 100 AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 9..100.1 125 mm
Sanitary and Watersupply works 17.3 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting Nos and making good the walls and floors wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, Including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 3087.70
17:32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard Nos board backing: 17.32.2 Rectangular shape 453x357 mm
18.66 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed Nos fitting arrangements, weighing not less than 106 gms.
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
17.36 Providing and fixing soil, waste and vent pipes: 17.35.1 100 mm dia 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729
19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard Nos design. 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Septic Tank(100 users) 2.8 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ), including dressing of sides and and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m 2.8.1 All kinds of soil.
16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete: 16.12.1 With common brunt clay F.P.S. (non modular ) bricks of class designation 7.5
4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 4.1.5. 1:3:6 (1 Cement :3 coarse sand (zone-III):6 graded stone aggregate 20 mm nominal size)
5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.22.6. Thermo- Mechanically Treated bars of grade Fe 500Dor more.
5.9 Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.5. 1 intels, beams, plinth beams, girders, bressumers and cantilevers
5.9.3 Suspended floors, roofs, landings, balconies and access platform
5.1 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement Allwork up to plinth level: 5.1.3 1:2:4 (1 cement :2 coarse sand (zone -III)4 graded stone aggregate 20mm nominal size)
6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement :4 coarse sand)
6.12 Half bricks masonry with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundations and plinth in: 6.12.2 cement mortar 1:4 (1 cement :4 coarse sand)
13.4 12 mm cement plaster of mix: 13.4.2 16 (1 cement :6 coarse sand)
13.9 Cement plaster 1:3(1 cement :3 coarse sand) finished with a floating coat of neat cement 13.9.1 12 mm cement plaster
19.18 Supplying and fixing C.I. cover without frame for manholes: 19.18.2 500 mm diameter C.I. cover (medium duty)the weight of the cover to be not less than 58 kg.
Water Supply Works Boring with 100 mm diameter casing pipe for hand pump/Tubewell, in all soile except ordinary hard rocks requiring including removing the casing pipe after the hand pump/tube well is lowered and tested : 18.49.8 Beyond 12 m and up to 18 m depth.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 18.9.7 62.50 mm nominal inner dia Pipes.
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.
Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any other approved method, measuring static level draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, V/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories eto, all as per requirement and direction of Engineer-in- charge.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and base support for tank.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain brass threaded fittings, including Axing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement Rm and testing of joints complete as per direction of Engineer in Charge Internal work-Exposed on wall 18 7.5 40 mm nominal outer dia Pipe
Providing and fixing Chlorinated PolyvinyI chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & brass threaded fitting, i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer- in- Charge. Concealed work , including cutting chases and making good the wall etc. 18.8. 3 25mm nominal outer dia pipes
18.8.1 15 mm nominal outer dia pipes
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 18.49.1 15 mm nominal bore
EARTH FILLING Excavating, Supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 30m in trenches, plinth, sides of foundation etc. compete.
ELECTRICAL WORK 1.10. :- Wiring for light point /fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core etc. as required. 1.10.1. Group A
1.10.2. Group B
1.10.3 Group C
1.14. Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit as required. 1.14.2. 2 x 2.5. sq.mm +1 x 2.5 sq. mm earth wire
1.14.3. 2 x 4 sq. mm +1 x 4 sq. mm earth wire
1.14.4. 2 x 6 sq. mm +1 x 6sq.mm earth wire
1.14.10 4x 10 sq.mm + 2 x 6 sq. mm earth wire
1.21:- Supplying and fixing following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 1.21.1 20mm
1.24 :- Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connectionss but excluding modular plate etc. as required. 1.24.1. 5/6 A switch
1.24.1 5/6 A switch
1.24.3 15/16 A switch
1.24.4. 3 pin 5/6 socket outlet
1.24.5 6 pin 15/16 A socket outlet
1.25:- Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1.28. :- Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1.28.3 4 Module
1.28.5. 8 Module
1.28.6. 12 module
1.33. :- Supplying and fixing brass batten/angle holder including connections etc. as required
1.44:- Installation, testing and commissioning of ceiling fan , including wiring the down rods of standard length (upto 30 cm)with 1.5 sq. mm FRLS PVC including copper conductor, single core cable etc. as required.
2.3:- Supplying and fixing following way single pole and neutral, shee steel, MCB distribution board, 240 V on surface /recess,complete with tinned copper bus , neutral bus bar, earth bar, din bar , interconnections , power painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.3.1. 6 way, Double door
2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with, tinned copper bus bar, neutral bas bar, earth bar, din bar, interconnections, power painted including earthing, din bar, interconnections, power painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2.4.1 4 way (4 + 12), Double door.
2.10:- Supplying and fixing 5A to 32 A rating, 240/415 V, 10 KA,"C" curve, miniature circuit breaer suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1. Single pole
2.10.3. Double pole
2.14:- Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB) having a sensitivity current 30mA in the existing MCB DB complete with connections testing and commissioning etc. as required. 2.14.2 40 A
2.15 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.15.3 63 A
5.2:- Earthing with G.I. earth pipe 4.5 metre long 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
7.1:- Laying of one number PVC insulated and PVC sheathed/XL power cable of 1.1 KV grade of following size direct in grol including excavation, sand cushioning, protective covering and refilling the trench etc. as required . 7.1.1 Upto 35 sq.mm
MR - 1:- Supplying with including fitting fixing of ceiling fan etc. as directed by the Deptt.
MR-2:- Supplying with including fitting fixing of Exhaust Fan etc. As directed by the Deptt.
MR-3:- Supplying with including fitting fixing of tube light etc. as directed by the Deptt. (Bajaj make) Code No. 11249 luminaries type 18 WH white.
MR-4- Supplying with including fitting fixing of LED Bulb 12 Watt. Etc. as directed by the Deptt. (LED home lighting Solution.).
MR-5:- Supplying with fitting fixing including laying "Mescab" 1.1 KV gd Al. Conductor XLPE insulated armoured PVC outer sheathed control/power cable confirming To IS: 7098 (Part-I) 1554 (Part-I) 1988 with amendments as applicable 16.00 mm2 4 core cable Conforming 100 mt
MR-6:- Supplying and fitting fixing 2 H.P. Single phase Centrifugal Mono block Pump set sync speed 2900 rmp. Model No. KDS- 213 with DOL Starter Control & switch gear (BCH/L&T/ Siemens/ equivalent make). With all accessories complete as required and as directed by the department.
MR-7:- XVI Energy meter. Supplying fitting fixing of energy meter material code - HSN code 9028 3 ph 4W ICS DLMS combine H.T. Tri-vector Energy meter (Category-A) 110/V3V 5A class 0.5, feeder metering (APDCL Schedule 2021-22).
MR-8-Supplying with installation, testing and commissioning of Hi-Wall 5 Star rating split type Air Conditioner of following capacity with cordless remote complete with Cu. Pipe and electrical connection etc. as required complete and as directed by the Department. ( 1.5 Ton Capacity (Model- MS- Q18WNZA NEW DP 54490 filter type Antivirus, Stabilizer free plug magic display, Ez clean filter, cools at 52 degree)LG made.
MR-9:- Supplying fitting fixing tubular pole SL No-749 Meterial code 101076 HSN code 7308 GI Tubular pole SP 22 (8.50 mt) APDCL Rate 2022.
MR:- 10:- Supplying with fitting fixing of 15L storage Geyser Crompton made (Amica, Black, with).
MR:- 11- Supplying fitting & fixing of street light arm bracket veekay light.
MR-12:- Supplying fitting fixing 1.1 KV gd aluminium conductor XLDE insulated armoured PVC outer sheeted conforming to IS- 7098(pt-I)(1988 with latest amendment as applicable make "Mescab" Considering 100 mt. length. 4.00 sq.mm 2 Core U.G Cable.
Payment to be made to the APDCL Authority for load Security.
Marjit Basumatary
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .