8221 REPAIR / MAINT TO FLOOR, ROOF, WATER TROUGH, RCC, BRICK WORK, ALLIED WORK IN VARIOUS CHARGES AND INTERNAL ELECTRIFICATION AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY

Amount

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2.0 each complete all as specified and directed.

Refixing of shutters only of any description area n exc. 1.00 sqm each at same opening complete all as specified and directed.

Refixing of shutters only of any description area exc. 1.00 sqm but n, exc. 2.00 sqm, each at same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n exc 1.5 sqm complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Refixing of chowkhat frame area n'exc 1.50 sqm at same opening complete all as specified and directed.

Refixing of chowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm, each at same opening complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick 2nd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F 35mm 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F 3 mm thick sheet glass, Ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass pine head type and glazing with oil putty in square n exc. 0.5 sqm in each pane complete all as specified and as directed.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames, glazed with putty or fixed with beads complete all as specified.

M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and directed.

S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and / or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

S&F 2nd class hard wood Plain fillets square, n exc 3 sqmm, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S & F Mild steel work as in holdfast conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

All as per above Item no 24 but 100mm long

Supply and fix only 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

All as per Srl item No. 26 here in before but 75 mm long

S & F 150mm long mild steel pressed handle oval type stove enamelled black complete all as specified and directed.

All as per Srl item No. 28 here in before butt 100mm long

S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed.

S & F for 100mm long butt hinges extruded aluminium anodised complete all as spd. & directed.

S & F 150mm long extruded aluminium anodised handle all as specified

S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.

Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.

Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

All as per Srl item No. 38 here in before but half brick in CM (1:4)

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

Taking down existing GI tubing 15 mm dia & connections including cleaning and refixing serviceable GI tube 15mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

Taking down existing GI tubing 20 mm dia & connections including cleaning and refixing serviceable GI tube 20mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F and repair 15mm bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions (Minimum weight 120 Gms) complete all as specified and directed.

S & F in repair 15mm bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends (minimum weight 110 Gms) complete all as specified and directed.

S & F in repair 15mm bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.

S & F in repair 15mm bore fency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions all as specified.

S & F in repair 15mm bore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends all as specified.

S & F and repair 15mm bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified.

S & F and repairs fo brass Chromium plated shower rose 125mm size with or witout swivel joints including fixing to GI pipe all as specified and directed.

S & F in repair for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. all as spd.

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm, white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

S & F PVC waste pipe of 32 mm dia PVC socket for WHB/Kitchen sink complete all as specified and as directed.

S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) complete all as specified and as directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, white colour, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing PVC/RCC water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F 15 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and as directed.

S&F in repairs 15mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 142gms) complete all as specified and as directed.

Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even complete all as specified and as directed. Note :WPC will be measured & paid separately)

M&L 10mm thick rendering in CM 1:6 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in CM 1:4 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M & L for applying two coat of distemper oil imulsion on newly plastered surface of walls including all preparation complete all as spd and directed

M&L Three coat of white wash as on new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed.

M&L two coats of cement base paint on new plastered surface after necessry preparation of surface complete all as specified & as directed.

M&L Three coat of white wash as on new plaster surface/concrete surface as after necessary preparation of surface complete all as specified and as directed.

Supply only integral water proofing compound.

Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engineer-in-charge.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee, Elbow, Socket) complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.

Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, complete all as specified and directed. ( ISI marked and conforming to relavent IS)

M & L for 18/19 mm thick veneered particle board interior grade solid core prelaminated both side with decorative choice lamination fixed with screw to timber frame work and directed by Engg. in. charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove.

M&L Machine cut kota stone slab flooring 20-25mm thick over including cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror finish incl screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror polish complete including rendering, 10mm thick CM 1:4 on vertical surface complete all as specified as directed.

S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nails at bottom, back and front side of wooden doors etc all as directed and specified

M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, urinal port etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheet in roof covering

S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.

M & L for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as spd & directed

M & L for 6mm thick AC two pieces adjustable plain wing ridge fixed with coach screw complete all as spd & directed

Demolition of cement concrete in ground floor paving n. exc. 15 cm thick below or above GL complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed.

M&L for PCC 1:2:4,type B-1(using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs not provided for, water throughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L PCC 1:2:4, type B2 (using 40 mm graded stone aggrgates) as in foundation filling and mass cooncrete complete all as specified and mixed with and including metallic hardner @ 4% by weight of cement even and fair laid in panels finished with spike rolling complete all as specified and directed.

M & L forming 12 mm thick expansion joint filled with bitminious filler with sealing compound Grade A complete all as specified and directed.

Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed.

M&L for RCC in 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M&L for RCC in 1:2:4, type B-1 (using 20mm graded stone aggregate) as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed.

M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work n' exc. 200 mm thick including fair finished complete all as spd and directed

M & L mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I) complete all as specified and directed.

All as per Srl item No. 112 here in before but 5 mm dia and over upto and including 10 mm dia in striupps

S&F for 600x600x12mm thick gypsum board as in false ceiling colour colour and patern as approved by GE including 24x24x.5mm thick aluminium angle, 45x24x0.50 mm thick T section use in frame work including suspension hanger of 6 mm dia GI wire including taking down existing false ceiling and electric fitting complete all as specified and directed.

S&F aluminum alloy anodised door or (partition fixed type) frame fixed with side hung shuters and glazing fixed with and including 4.8 mm thick inned glass fixed wih rubber gaske with aluminium heading clips made with aluminium box section as appended below complete all as specified and directed. (i) Aluminium frame of size 100 x 44 x 1.98 mm thick and rawi plug. (ii) Middle and lock rail 150x44x1.98 mm thick and above. (iii) Bottom rail 150x44x1.98 mm thick and above. (iv) Aluminium beading 0.7 mm thick (v) Aluminium handle 'D' type 150mm long, aluminium tower bolt 9.9mm dia shoot 200 mm long brass long brass mortice lock 100mm 4 leaver aluminium stopper, cleat, double action floor spring hydraulically regulated made of less than 1.25with stainless seel cover governing pivo made of brass other part of steel heavy duty. (vi) Fixing lugs/ hold fast of appropriate size including PCC bed block 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) (vii) Making good disturbed wall surface and making the surface match with existing wall finish by applying existing wall finish.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) Aluminium fittings such as aluminium suitable fittings for auto interlocking closing (v) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

M&L for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/ using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement and providing at places additional reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh) & tack, securing with clips / blinding wire, welding and Provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and /or reveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, work of water tanks and similar work conforming to FE 290 Gde E-165, complete all as specified as directed. for portion framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. Including taking down wood frame work complete all as specified and directed.

Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.

Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for re-use after making minor repairs complete all as specified and directed.

Taking down electric storage type water Heater (Geyser) and disconnecting, removing to store for keeping in safe custody in store for re installing after making minor repair and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.

Taking down main switch / MCB DBS including MCBS etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately) or re-use and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable (red colour cable to be used for live connection and black colour cable to be used for neutral connection) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exh fan/bell point controlled by one way switch.

All as per Srl item No 125 here in before but one 3 pin socket oultel 5 Amp on the same board with other switch

All as per Srl item No 125 here in before but one 3 pin socket oultel 5 Amp independent

All as per Srl item No 125 here in before but 2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps

S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S&F Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.

S&F Lamp Holder, PVC/Polycarbonate type with back plate for batten fitting including 9 watt, 240 Volt Lamp LED, aluminium heat sink powder coated white with PC diffuser & B22 base complete all as specified and directed.

S&F ceiling rose 3 terminals PVC / Polycarbonate insulated body 65mmx 50mm size complete all as spcified and directed.

Fixing only old serviceable light fittings any type received from item Nos.-121 above including electric connection & cleaning complete.

Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item Nos.-121 above including cleaning & connecting up with 3 core flexible copper conductor cable of suitable size.

S&F in repairs switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S&F in repairs Switch Piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

S&F in repairs socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.

S&F in repais switch Socket combination 5 in 1, 5 A/15 A flush type complete all as specified and directed.

S&F in repairs Lamp holder (batten/angle) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified and directed.

S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts complete all as specified and directed.

S & F in repairs normal/worm white LED Tube light fittings 18/20 Watt, 4', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed .

S & F in repairs LED Bldg security light 25 watt, IP-65 complete and including suitable electric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V grade complete all as specified and directed

M & L in repairs on surface for non metallic rigid PVC conduit ISI marked, medium grade 25mm dia size including all fittings such as tees, bends, junction boxes, elbows, saddles, lock nuts etc and making good disturbed surfaces complete all as specified and directed. Make- AKG/Presto Plast/ RKG Plastic/Austro , ISI Marked

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in & including PVC Casing & caping and taking down and making good disturbed surface to match with the existing surface of walls, floors etc, all as directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in existing PVC Casing & capingand taking down and making good disturbed surface to match with the existing surface of walls, floors etc, all as directed.

S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SPN, 20 A, 240 V MCB complete all as specified and directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in repairs MCB single phase and neutral 16A-32A, 230V 10KA. B' curve type complete all as specified and directed. M

S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed.

S & F in repairs GI bracket made out from GI pipe 32/25mm dia, 1.2 mtr long bend to shape including 02 Nos 25x4 mm MS clamps,nuts, bolts washers fixed on wall & including painting etc complete all as specified and directed.

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope / gradient for laying cables/ pipes etc. all as specified and directed including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as specified and directed. Note : Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and as directed.

Removing excavated material (soils) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supplying & Laying Sub Class `B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection all as specified and directed.

Supply and laying new dry river sand laid in trenches 8.0cm below the cable and 15cm above the cable and gently punned to 18.0cm as cable cushioning and covering complete all as specified and directed. (Note:- Only punned 18 CM thick sand cushioning shall be measured and paid)

M&L for cutting/Boring of road/Hard standing to a size of 30 cm in width and not exceeding 60 cm in depth for laying of protection pipe/water line/Cable including returning filling, Including spreading and providing PCC in 1:2:4 B1 using 20 mm grade stone aggregate for the top 100mm layer, complete all as specified and directed.

Supply and laying galvanised iron pipe 50mm bore light grade fixed to poles with steel clamps laid under road crossing, fixed to wall etc complete all as specified and directed.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor of 10 sqmm size, 2 1100 volts grade ISI marked as per IS 7098-I laid in trenches ducts or fixing or passing through GI pipe across the road / path / drains / along wall / floor / pole / equipment etc. cross sectional area including cable lugs complete all as specified and directed.

Dismantiling the ceiling fan received from Item 122 here in before and E/M stores, examine complete part thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of spares & accessories, rewinding, reassembling, making fully functional and also depositing to E/M stores & Hanging the ceiling fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable complete all as specified. [Note:- Spares & accessories in Item Srl No-164 to 172 shall be measured and paid separetely.]

M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed.

Supply only ball bearings suitable for ceiling fan of any sweep.

Supply only capacitor 2.5 Mfd, 415 , 50Hz. Make- Universal/Tibcon

Supply only fan hook clamps steel suitable for ceiling fan hanging.

Supply only rubber reel for ceiling fan hanging .

Supply only fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed.

Supply only Canopy PVC suitable for fixing on fan down rod with screws etc.

Supply only Fan blades complete with nuts & washers complete all as specified & directed. Make- Bajaj/Orient/ Havells/Crompton

Supply only nut, bolt, washer and split pins suitable for fixing of fan clamps with down rod& hanging of ceiling fan complete all as specified & directed.

Dismantiling the Exhaust fan received from Item 122 here in before and E/M stores, examine complete part thoroughly, oiling, greasing all parts and complete overhauling of Exhaust Fan including replacement of spares & accessories, rewinding and reassembling making fully functional and also depositing to E/M stores & Fixing the exhaust fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with three core 1.0 sqmm PVC electric cable with stranded copper conductor complete all as specified. [Note:- Spares & accessories in Item Srl No-174 to 179 shall be measured and paid separetely].

M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaust fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed by Engr-in-Charge.

Supply only ball bearings suitable for Exhaust fan of any sweep.

Supply only capacitor 4.0 Mfd, 415 , 50Hz. Make- Universal/Tibcon/Bajaj/ Usha

Supply only metalic Exhaust fan blade with MS frame for 300mm sweep Exhaust fan complete all as specified and directed. Make- Bajaj/ Crompton/ Havells, ISI Marked

Supply only rubber Pad for Exhaust fan fixing.

Supply only nut, bolt,washer and suitable for fixing of Exhaust fan clamps/arms.

Disconnecting / taking down from position existing defective storage type water heater (Geyser) 25 Ltrs capacity from Item No-123 above, carefully, Opening for repairing/replacement of deffective spares including replacement of spares & accessories and reassembling making fully functional with accessories & packing new glass wool etc and also depositing to E/M stores & Re-install of M&L for geyser after cleaning painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters and fixing of suitable nuts bolts with washers on wall including all necessary electrical connection with three core 1.5 sqmm PVC insulated sheathed of stranded copper conductor electric cable and also water connection with suitable heavy duty PVC connections complete all as specified. [Note:- Spares & accessories in Item Srl No-181 to 188 shall be measured and paid separetely].

Supply only Geyser assembly made out of copper for 25 Ltr capacity Geyser as per sample complete all as specified and directed. ISI Marked, Make- Bajaj/Havells.

Supply only Geyser element upto 2.0KW as per existing such as push type/thread type/dual clip type etc. with rubber gasket suitable for Geyser of complete all as specified. Make:- Bajaj/ Recold/ Havells.

Supply only thermostate switch ( ISI Marked ) suitable for Geyser 25 Ltr capacity, adjustable 0 degree to 80 degree centigrade and acting at 70 degree centigrade complete all as specified and directed. Make- Thetta /Bajaj / Recold

Supply only indicator lamp (ISI Marked) square type/round type, red/green colour for Geyser of any capacity complete all as specified and directed.

Repairs on existing inner copper tank by using brazing to make leak proof not exceeding 15 cm in length complete all as specified and directed.

Repairs on existing copper Geyser assembly by using brazing to make leak proof not exceeding 12 cm in length complete all as specified and directed.

Supply only pressure release valve with bent to Geyser as per ISI specification and directed.

Supply only safety valve for Geyser as per ISI specification and directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Bidder Name

M/s Naresh Kalia