Repair to certain trade pattern, HFD items, painting to steel furniture, polishing to wooden furniture and misc repair work at BSO yard and other units /MD Accn area under GE Dehradun.

Amount

Repair to Chair executive revolving Type-I HFD-2047 Material and labour in repair Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat of chair executive revolving including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs over new seat of 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

Material and labour in repair Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for back of chair executive revolving including taking out old worn out Tapestry/Fabric Cloth & Foam from chairs over new seat of 12mm hot pressed plywood and PVC beading around the back complete all as specified and as directed.

Removing of existing unserviceable caster wheels and Supply and fix suitable caster wheels of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts to chair revolving steel of various types.

Removing of existing unserviceable bottom base and Supply and fix suitable bottom base made out of stainless steel of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts to chair revolving steel of various types.

Removing of existing unserviceable Hydraulic system and Supply and fix suitable Hydraulic system of existing shape & size complete to match the original as shown on drawings as directed to chair revolving steel of various types

Removing of existing unserviceable Hand rest and Supply and fix suitable Hand rest of rubberised PVC of existing shape & size complete to match the original as shown on drawings as directed with suitable nuts & bolts as to match with the existing to chair revolving steel of various types Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws if reqd and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Chair CB Steel without arms cushioned seat and back HFD-2044

Supply and fix in repair Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat of chair CB w/o arms including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs over new seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed.

Supply and fix in repair Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for back of chair CB w/o arms including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs over newback 12mm hot pressed plywood and PVC beading around the back complete all as specified and as directed. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Couch Examination HFD-2019

Removing of old foam leatherite rexin from couch examination and provision of new 50 mm thick synthetic foam of 32 density (Make-Sleepwell/Kurlon) and covering of foam with leatherite raxion of best quality complete all as per drawing and as specified and directed by the Engineer-in-Charge. Note:-(i) Cost of all type screw, pvc shoe and steel surface painting of one coat synthetic enamel paint (White)of couch examination shall deemed to be included in the quoted rate. (ii) Cost of leatherite rexin cloth approved by GE/ Engineer-in-Charge, shall be in the range of Rs 350/- to Rs 400/- approx per meter.

Repair to Chair CB Steel with arms cushioned seat and back HFD-2044

Supply and fix in repair Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for seat of Chair CB Steel with arms cushioned seat including taking out old worn out Tapestry / Fabric Cloth & Foam from chairs over new seat 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed by Engineer-in-Charge.

Supply and fix repair Tapestry/Fabric cloth over synthetic foam 25mm thick (as approved) for back of Chair CB Steel with arms cushioned back including taking out old worn out Tapestry / Fabric Cloth & Foam from chair back over new 12mm hot pressed plywood and PVC beading around the seat complete all as specified and as directed by Engineer-in-Charge.

Removing of old unservicable arms and supply & fixing new arms of existing shape and size made out of seasoned Ist class hard wood (Shisham) and covered with foam & cushioned as per directed by Engr-in-charge. (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting including PVC beading around the seat & back of the chair to be included in the quoted rate.

Repair to Chair CBA Steel children HFD-2046

Removing old unserviceable one piece pvc seat and back of chair CBA Steel children and Supply and fix new one piece pvc seat and back including cushion seat with rexin cloth of chair as per specified in drawing with fixing material complete all as specified and as directed.

Removing old unserviceable arms of chair and supply & fixing arms made out of IInd class hardwood duly covered with 15mm foam with rexin cloth complete and including welding of steel frame the broken joints duly painting with one coat of synthetic enamel paint black and shade and providing four nos new hard rubber shoes to each chair complete all as specified and directed.

Repair to Screen movable with cloth HFD-2015

Removing all unserviceable green cloth and both side hook spring set of three to screen movable and supply & fix new green cloth of ( approved best quality) with suitable size spring including minor repair like welding, painting to frame and including replacement to wheels complete all as specified and as shown on drawing as directed.

Repair to Table bed side steel Type-II HFD-2005

Supply and fix in replacement of unserviceable old knob 25mm and PVC Shoe with new aluminium anodized knob 25mm and PVC hard shoe of best quality including minor repair like welding and painting to steel surface of the table one quoted by spray gun with synthetic enamel paint of whitte shade after preparation of old painted surface complete all as specified and as directed.

Repair to Table office clerk steel Type-II HFD-2051

Supply and fix in replacement of unserviceable old Table top with new Table top made out of 18 mm thick pre- laminated MDF Board with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete.All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose compodent by continuous welding around the broken joints all as specified and as shown on drawing.

Repair to drawer/ shutter of the table steel by removing deep dents, welding of broken joints etc. complete all as specified.

Supply and fix in replacement of unserviceavle lock with new lock of size 40 mm , 4 lever ISI marked with duplicate key complete all as specified.

Supply and fix in replacement of unserviceable old PVC shoe with new PVC shoe of best quality complete all as specified.

Material and labour for painting to steel and iron surface of table with one coat synthetic enamel paint of olive green shade after preparation of old surface with spray painting complete all as specified.

Repair to Table centre two tier steel HFD-2040

Supply and fix in replacement of unserviceable old glass table top with new glass table top of size 800X550X10MM thick with rubber buffers and PVC shoe including minor repair welding and painting to steel surface of the table with one coat of synthetic enamel paint of black shade after preparation of old painted surface with spray painting complete all as specified and as directed.

Repair to Chair easy wooden cushion seat and back HFD-2034

Material and labour for replacement of old seat cushioned seat with new cushion 75 mm thick of size 700X500mm made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter shade and quality shall be approved by Engr-in- charge/GE.

Material and labour for replacement of old seat cushioned seat with new 75 mm thick of cusioned of size 560X500mm made of cool foam (Make : Sleepwell/ kurlon ) of 32 density duly covered with well finished best quality tapestry cloth not less than Rs 250/- Per meter shade and quality shall be approved by Engr-in- charge/GE.

Material and labour for replacement of front & back moulded round type shape legs with new leg made of well seasoned sheesham wood duly plained/smoothened after taking out the old unserviceablefront front and back legs.

Material and labour for replacement of old u/s front & back rail and Supply & fix new front & back rail of existing shape and size made out of well seasoned sheesham wod as directed by Engr-in-charge.

Material and labour for replacement of old u/s side rail and Supply & fix new side rail of existing shape & size made out of well seasoned sheesham wood as directed by Engr-in-charge.

Material and labour for Polishing all new and old surface with two caots of french polish after preparation of old surface complete all as specified.

Repair to Side rack wooden with glass HFD-2042 Supply and fix the following new parts after removing broken/unserviceable part including tightening with screw other member of the side rack complete and all as specified shown on drawing.

Supply and fix in repair 18mm thick pre laminated MDF board top existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around.

Supply and fix in repair 18mm thick pre laminated MDF board bottom existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around.

Supply and fix in repair 18mm thick pre laminated MDF board sides existing side rack shape and size shown on drawing including 4mm thick teak wood beading all around.

Supply and fix in repair 18mm thick pre laminated MDF board bottom existing shelves rack shape and size shown on drawing including 4mm thick teak wood beading all around.

Supply and fix in repair 5mm thick glass door with double aluminum channel existing side rack shape and size shown on drawing including suitable handle.

Repair to Table office offrs steel with side table HFD-2050

Supply and fix in replacement of unserviceable Table top with new Table top made of 18 mm thick pre- laminated MDF board size of 1800X900mm with 4 mm thick, half round teak wood edging shall be provided all around and fixed to frame with screws complete.All exposed surfaces of wood work shall be treated with French Polish high gloss best quality and included electric welding of loose compodent by continuous welding around the broken joints complete all as specified and as shown on drawing.

Repair to drawer/ shutter of the table by removing deep dents, welding of broken joints etc. complete all as specified.

Supply and fix in replacement of unserviceavle lock with new lock of 40 mm size, 4 lever ISI marked with duplicate key complete all as specified.

Supply and fix in replacement of unserviceable PVC shoes with new PVC shoes of best quality complete all as specified.

Removing of old u/s table front side runner and Supply and fix new runner of size 1800X600mm made out of pre laminated MDF board complete all as specified and directed.

Removing of old u/s table table side runner and Supply and fix new side runner of size 730X600mm made out of pre laminated MDF board complete all as specified and directed.

Removing of old u/s table side rack top and Supply and fix new table side rack top of size 900X450mm made out of pre laminated MDF board.

Removing of old u/s table side rack side runner and Supply and fix new side rack side runner of size 600X400mm made out of pre laminated MDF board complete all as specified and directed.

Removing of old u/s table side rack key board tray and Supply and fix new table side rack key board tray of size 450X480mm made out of pre laminated MDF board with telescopic channel complete all as specified and directed.

Material and labour for Painting to steel and iron surface of table by spray gun with one coat of synthetic enamel paint of olive green shade after preparation of old surface complete all as specified.

Hot food trolley alm HFD-2066 Supply and fix the following new parts after removing the unserviceable parts including minor repair like gas welding nut&bolts heating system and preparation steel surface inner and outer of the hot food trolly complete all as specified and shown on drawing.

Supply and fix in replacement heating elements 2 KW cup type with rubber washer and nut & bolts.

Supply and fix iin replacement cable three core copper conductor heavy duty 5 mtr each trolly with three pin plug top 15 amps complete all as specified and directed.

Supply and fix in replacement new steel pot with lid suitable size each hot food trolly 7 Nos Pot complete as per drawing.

Peg Table FD-25(M),FD-236,FD-266,FD-277,FD-384

Removing of old unserviceable existing top from table peg and Supply and fix new top of size 1’×1.5’ as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine,rest all as specified and shown on Drg or as directed by Engr-in-Charge.

Teapoy Wooden FD-34(M),FD-232,FD-278,FD-382

Removing of old unserviceable existing top from table peg and Supply and fix new top of size 2’×1.5’ as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine,rest all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Center FD-29(M),FD-134(M),FD-152(M),FD-235,FD-274,FD-393

Removing of old unserviceable existing top from table peg and Supply and fix new top of size 3’×1.5’ as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine,rest all as specified and shown on Drg or as directed by Engr-in-Charge.

Table 900mm×600mm FD-88(M),FD-94(M),FD-291,FD-352

Removing of old unserviceable existing top from table 900x600mm and Supply and fix new top of size 3×2 as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine, all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Writing FD-33(M),FD-151(M),FD-268,FD-249,FD-275

Removing of old unserviceable existing top from table writing and Supply and fix new top of size 4x2’ as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging half round beading of make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine, all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Dining 900mm×900mm FD-209, FD-291

Removing of old unserviceable existing top from table 900x900mm and Supply and fix new top of size 3x3 as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine,rest all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Dining 1200mm×900mm FD-273

Removing of old unserviceable existing top from table dining and Supply and fix new top of size 4x3 as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine, all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Dining 6 Person FD-30(M),FD-239,FD-269,FD-273

Removing of old unserviceable existing top from table dining and Supply and fix new top of size 5x3 as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine,all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Dining 8 Person FD-30(M),FD-239,FD-273,FD-376

Removing of old unserviceable existing top from table dining and Supply and fix new top of size 6x3 as per Drg made out of 18mm thick particle board (exterior grade) duly post-formed with 0.6mm thick laminated in walnut colour or as approved by Engr-in-Charge with 2mm thick pvc edging of half round beading make:-Rehau/Pegasus/kynes shall be fixed on two side with strong bonded chemical adhesive through hot pressed machine, all as specified and shown on Drg or as directed by Engr-in-Charge.

Table Peg (T&P)

Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing and directed by Engr-in-Charge. Table Top new made out of glass (5mm thick) as approved by Engr-in-charge .

Front and back rail

Short rail

Legs square & round type

Short/long stiffeners

Supply and fix second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs complete all as specified and directed.

Material and labour for French polishing two coats on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and directed.

Table Centre size of 1050x525x450 mm Supply and fixing the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge.

Table Top new made out of glass (5mm thick) as approved by Engr-in-charge .

Front and back rail

Short rail

Legs square & round type

Short/long stiffeners

Supply and fix second class hard wood corner / bracket (L shape) of size 50 x 50 x 20 mm thick and fitted with screw between long rail to legs short rail to legs.

Material and labou for French polishing two coats on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and directed.

Sofa Set 5 Seater (one large peice three seater and two single seater)

Removing of old tapestry cloth, hessian cloth from sofa set of five seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 40 density and wooden legs replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (a) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 40 density (b) Tapestry cloth best quality not less than Rs 550/- per meter shade and quality shall be approved by Engineer-in-charge. (c) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item

Sofa Set Single Seater

Removing of old tapestry cloth, hessian cloth from sofa set of single seater and provision of new tapestry cloth, hessian cloth, linning cloth including tightening of spring, replacement of old spring with new spring where required, cords, replacement of seat and back cushion 100 mm thick made of 100% foam 40 density and wooden legs replacement with new legs, rail, arms, stiffener where required and polishing of exposted surface complete all as specified and shown on drawings. Note:- (a) Seat and back cushioned 100 mm thick made of 100% foam. Make-Sleepwell/Kurlon of 40 density (b) Tapestry cloth best quality not less than Rs 550/- per meter shade and quality shall be approved by Engineer-in-charge. (c) The cost of steel screw, nails, polishing of wooden frame etc shall be deemed to be included in quoted rate of this item

Book Shelf Supply and fixing the following new parts after removing broken parts of prelaminated particle board exterior grade including tightening other parts with screw only of the book shelf complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable top, bottom and shelves with 4mm thick teakwood beading with polishing of size 750x270 mm and fabricated out of pre-laminated particle board exterior grade with teak veneers both side 18 mm thick work with screws and MS clamp (L Shape) complete all as specified.

Replacement of old unserviceable side runner of top bottom and shelf and supply and fix teak wood runner of size 1050x280 mm complete all as specified and directed.

Replacement of old unserviceable plywood, 6 mm thick, commercial on back side of size 1050x750 mm of the bookshelf complete all as specified.

Replacement of old leg frame of size of long rail 700x100x40 mm and short rail 170x100x40 mm made of hardwood all as specified.

Table Writing (Steel) (900 X600 X760 mm) (DBS/MFFR)

Supply and fix in replacement of unserviceable Table top with new Table top made of 18mm thick pre- laminated particle board (Exterior grade) of size 900 x 600 mm with 4 mm half round teak wood edging fixed to frame ( all-round) with screws complete all as specified and as shown on drawing

Supply and fix in replacement of unserviceable PVC shoe with new PVC shoe of best quality complete all as specified and as directed by the Engineer-in-Charge

Cutting and removing old un-serviceable leg of table upto 100 mm long and provide new leg of MS 25 mm square pipe having 1.6 mm wall thickness as per existing complete all as specified and as directed by the Engineer-in-Charge .

Repair to drawer of the table by removing deep dents, welding of broken joints etc. complete all as specified and as directed by the Engineer-in-Charge .

Material and labour for Painting to steel surface of the Table Writing by spray gun with one coat of synthetic enamel paint of Grey shade after preparation of old painted surface complete all as specified and as directed by the Engineer-in-Charge .

Table Dining 06 persons HFD/TP Supply and fix the following new parts after removing broken parts of well seasoned sheesham wood including tightening other parts with screw only of the table complete all as specified in drawing directed by Engr-in-Charge.

Fancy type front and back long rail

Fancy type short rail

Fancy type legs

Table Top new made of prelaminated MDF board with coffee colour both side of size 1800x900x18mm thick MDF board prelaminated with 4 mm thick half round teak wood beading shall be provided all around

Supply and fix second class hard wood corner / bracket (L shape) of size 150 x 150 x 35 mm thick and fitted with screw between long rail to legs short rail to legs.

Material and labou for French polishing one coat on surfaces of wood of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats.

Stool Steel with Back Rest HFD

Supply and fix Tapestry/Fabric cloth over sythetic foam 25mm thick (as approved) for seat of Stool Steel cushioned seat including taking out old worn out Tapestry / Fabric Cloth & Foam from Stool Steel seat over 12mm thick hot pressed plywood complete all as specified and as directed by Engineer-in-Charge.

All as per item No 30.01 here in before but Back of stool steel with back rest complete all as specified and directed.

Supply and fix in replacement steel handle as per existing shape and size for stool steel with back complete all as specified and directed. Note :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. (ii) Cost of all type nut bolts and screws and painting of the Stool to be included in the quoted rate.

Chair Dining Officer Long Back FD-357

Taking down old u/s Rear Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front Leg and Material & labour for New leg made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Side Rail and Material & labour for New Side Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Front or Back Rail and Material& labour for New Front or Back Rail made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Bottom Stiffener and Material & labour for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Taking down old u/s Back Strip and Material & labour for back strip made out of teak wood duly polished to match the existing Chair complete all as specified in drg and as directed by Engr-in-Charge.

Supply and fix new bracket triangular shape with 02 Nos steel screws of suitable size bracket made out of teak wood duly polished to match the existing Chair of size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.

Material and labour for new Rubber/PVC shoe of superior quality with steel plated screws of suitable size including removing old/ worn out shoes complete all as directed by Engr - in - Charge

Removel of old cushion and Supply & fixing of new seat cusion of 75 mm thick 40 density complete with approved tepestry. (Rate of tapestry should not be less than Rs 350/- per RM). all as shown on drawing and as directed by the Engr - in - Charge.

Material and labour for Polishing to new &old surface with two coats of french polish after preparation of old surface complete all as specified & directed by Engr-in-Charge.

Repairs to Hat Stand with Mirror Small/Large FD-233, FD-362

Removing of old unserviceable ply wood of hat stand and Supply & fix new ply wood 4 mm thick of hat stand one side sunmica complete with 4mm thick teak wood edging shall be provided all round complete all as specified and directed.

Removing of old unserviceable pegs of hat stand and Supply & fix new metal pegs to hat stand all as directed by Engineer-in-Charge and as per drg.

Removing of old unserviceable mirror of hat stand and Supply & fix 4 mm thick new mirror to hat stand all as directed by Engineer-in-Charge and as per drg. Make:- Atul, Saint Gobin, Modi guard or equivalent as approved by GE.

Removing of old unserviceable ply wood from back of hat stand and Supply and fix new ply wood 6 mm thick commercial ISI marked duly French polished all as per drg to hat stand, complete all as specified and directed.

Material and labour for French polishing with high class finish, including preparation by proper sand papering to hat stand complete all as specified & directed by Engineer-in-Charge and all as per drg.

Table Invalid HFD

Removing old unsv top and supply & fix of new top made out of mdf board (exterior grade ) as per drg or as per directed by Engr-in-charge.

Removing old worn out paint and Material and labour for one coat of synthetic enamel paint to the table invalid after preparation of old surface as per directed by Engr-in-charge.

Removing old unsv wheels and Supply & fix of new wheels of existing shape and size as per drg complete all as per drg/directed by Engr-in-rgeChage.

Computer Table TP/HFD

Material and labour for TOP of TABLE COMPUTER made out of with Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHIED), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing including taking out unserviceable Top, complete all as specified and as directed.

Material and labour for DRAWER made out of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY/ ARCHID) and fixing to TABLE COMPUTER as shown on Drawing , including taking out unserviceable Drawer, complete all as specified and as directed.

Material and labour for LOCK (MAKE : GODREJ) of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Lock, complete all as specified and as directed.

Material and labour Mild Steel HANDLE of TABLE COMPUTER and fixing as shown on Drawing including taking out unserviceable Handle, complete all as specified and as directed.

Supply and fix HARD RUBBER SHOE superior quality (as approved) to Leg of TABLE COMPUTER as shown on Drawing including taking out unserviceable Shoe, complete all as specified and as directed.

Bed stand iron hospital

Material and labour of 01 coat of powder coated paint of approved colour after the preparation of surface all as directed by Engr-in-charge. Note;-the cost of minor repair of the Bed stand iron hospital ,if any shall be included in quoted rate

Removing of old wheels and Supply & fix of new Wheels of existing shape and size or as directed by Engr-in-Charge.

Patient trolley

Removing of old wheels and Supply & fix of new Wheels of existing shape and size and as directed by Engr-in-Charge.

Material and labour for 01 coat of powder coated paint of approved colour after the preparation of surface or as directed by Engr-in-charge. Note;-the cost of minor repair of the Patient trolley ,if any shall be included in quoted rate

Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish.

Chair Dining FD-279/203/16/262

Chair Writing FD/20/202/250/280

Chair Easy FD-229/201/17

Chair dining officer

Chair WBB FD-26/225/285

Bed Hard FD-246/245/247

Sofa Set 4 Seater FD-281

Sofa Set 5 Seater FD-281

Stool Dressing FD/MAP/14

Table Dressing Ladies FD/MAP/07

Table Bed Side FD-213

Table 3 x 3 FD-223

Table officer

Side Board FD-241/26

Bin Soiled Linen FD-244/15(m)/212

Table Dressing Gents FD-230/231

Table Writing FD-249/275/33(m)

Teapoy FD-232/278

Table Centre FD-235/274

Table Peg FD-236/277

Table Dining 6 Persons FD-273/329

Table Dining 8 Persons FD-273/329

Table 3'x2' with out drawer FD-231/223/284

Table 3'x2' with drawers FD-231/223/283/284

Table dining 1200x900 FD/MAP-II/03

Material and labour Spray painting with two coat of synthetic enamel Paint of smoke grey colour on old painted surface with high class finish including necessary scrapping, denting and to smoothen the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/ bore holes etc with paste filler to under mentioned items complete all as specified and directed by Engr-in-charge/GE

Rack adjustable steel 6 tier 3 side open type

Rack adjustable steel 6 tier 3 side closed type

Trestle Store room

Chair CB Steel

Chair CBA Steel

Chair Invalid wheelly folding type

Table office clk Type-I

Table office officer steel

Table center steel two tier

Table Hav OR's steel

Table steel top folding

Table 1500mm x 750mm x 850mm steel

Table invalid steel

Chair Folding tubler

Side Rack 3/4Spaces steel

Screen Movable Steel

Material and labour for Spray painting with 02 coats of Hammer Tone silver metallic/Grey colour (outer side) and OG/Smoke gray colour paint (inner side) on old painted surface with high class finish, including necessary scrapping, denting, smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/holes /bore holes etc with paste filler to under mentioned items complete all as specified & directed

Almirah large steel with shelves and Almirah half hanging & half shelves (Complete internal and external surface)

Almirah medium steel with shelves and Almirah steel small half hanging & half shelves (Complete internal and external surface)

Locker SKD 562 (Complete internal and external surface).

Locker bed side steel (Complete internal and external surface).

Material and labour Spray painting with two coats of synthetic enamel paint of smoke grey colour on old painted surface with high class finish including necessary scrapping, denting and to smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/ bore holes etc with paste filler to under mentioned items complete all as specified and directed by Engr-in-charge/GE

Book Shelf open small/Large steel/Book case steel/cabinet Map steel (Complete internal and external surface)

Table dining OR’s steel/Table 1520x860x760mm steel (Complete internal and external surface)

Table table 3x2 with & without drawers steel and Table 3'x3' steel (Complete internal and external surface)

Material and labour Spray painting with two coat of synthetic enamel paint of black colour on old painted surface with high class finish including necessary scrapping, denting & to smoothening the surface by cleaning, removing of old paint marks etc, rubbing with sand paper, filling gaps/ holes/bore holes etc with paste filler to under mentioned items complete all as specified & directed by Engr-in-charge

Rack shoes steel

FMN/MNF/MNI Set

Charpoy Folding IP

Ladder for Loft Steel

Chair CBA Special with hand rest

M R Taders (BID ID -3159106)

Meher enterprises (BID ID -3164388)

L BHIMSEN (BID ID -3164565)

Raghav supplier & contractor (BID ID -3164391)