General

Brick Masonary in CM (16) using 2nd Class well burnt grounded of evang crushing strength of not less than 35 Kg./Sq in & the of 254117 nincluding cost & conveyance of Material to le, mising of Cement Murter & laying of bricks & mortar to specified thickness, wetering, curing, including a scaffolding, hire & operational charges of machinery, all labour charges & all water lead charges etc., complete for finished item of work. (BLD-CSTN-3-1)

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

supply fixing of Gl Pipes 50mm thickness for roofing rafters, purlins MS rectangular tubes for Truss

Roofing with Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength : 550 MPA. Paint Coating : with Regular Range Colours Microns. Sheet Width: 1.020, Length: Maximum 12 Meters Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Regular Modified Polyester painting. fixied with self drilling screws hex washers fitners and flaers Including cost of conveyance of all material from source to site of work and all labour chareges rooffing with all approtations excluding cost of purlins and rafters

Masonary works in CM (1:6) Propostion with fly ash Cement Solid blocks of size 290X225X140mm for Manufacturing of Fly ash Solid blacks using fly ash of 80 kgs, Cement of 15kgs gyspum of 5kgs and stone dust including cost and conveyance of all Materials and labour charges scaffoldiding and curing charges etc.. complete with a Compressive streanth of not less than 50kg/Sqm for walls.cement brick masanary

WPC Door Shutters

RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with duars sponge finishing, Including cost & conveyance of all Material to site, operational & incidental, cost and conveyance of cement, wire mesh, water work site, contering, scaffolding and form work, lift charges etc., complete for finished items of work (APSS No.403 & 903] (BLD-CSTN-6-11)-10SQM

Manufacture, Supply and Delivery of Unplasticised P.V.C Fipes for potable water supplies conforming to 15: 498/2000 ped revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP but excluding Taves. (P.1 Items, P.H Items, P.67

Provision for Seignorage charges

Provision for DMF @ 30% on Seigniorage Charges

Provision for Consideration @ 100% on Seigniorage Charges

Provision for Merit @ 2% on Seigniorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item