REPAIR/MAINT OF INTERNAL WIRING IN OTM ACCN/OFFICES, MH INCL REPAIR/REPLACEMENT OF OLD UNSV FITTINGS AND FIXTURES, SOLAR HEATERS, GEYSERS, EARTHING, SUMMER APPLIANCES, METERS INCL OTHER ELECTRIC FITMENTS AT PANGODE MIL STN UNDER GE (ARMY) TRIVANDRUM

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site after accounting in credit schedule and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down Main switches DBs with sheet metal enclosure 4/8 way SPN/TPN/DBs etc complete all as specified and directed.

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded, copper conductor through PVC casing and capping 20/ 25 mm size with accessories with sunk iron pressed steel terminal box for fitting mounting switches, sockets, fan regulators etc, with laminated sheet 3mm thick cover including provision of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one exhaust fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one 3 pin socket 5 Amps, single pole on the same board with other switches including continuous 1.5 Sqmm PVC insulated copper conductor earth wire to common wire earth and connecting to earth dolly all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one 3 pin socket outlet, 15 Amps, independent, with cables 4.00 sq. mm size sheathed stranded 1100 Volt grade complete with 4Sqmm PVC insulated earth wire and connecting to earth dolly all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for one 5 Amp, 3 pin socket outlet on independent board all as specified and directed.

All as per SI item No. 3.00 here-in-before, but for One bell/ buzzer point controlled by one 5 Amps bell push button complete all as specified and directed.

S&F switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F switch socket combination multi purpose 5 pin 5/6 Amp flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type universal complete all as specified and directed.

S&F Bell push, flush type, 5 Amp, 240 Volt, one way complete all as specified and directed.

S&F in repairs switch piano, flush type single pole, one way 5/6 Amp, 240 Volt complete all as specified and directed.

S&F in repairs Modular switch, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs Modular switch, one way 16 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs bell push, flush type, single pole, one way 5 Amp, 240 Volt complete all as specified and directed.

S&F in repairs Switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type universal complete all as specified and directed.

S&F in repairs Modular bell push, one way 6 Amp, 240 Volt 1 module complete all as specified and directed.

S&F in repairs switch socket combination, 5 pin 5/6 Amp flush type complete all as specified and directed.

S&F in repairs socket outlet multipurpose 2/3 pin, 6 Amp, modular type, 2 module complete all as specified and directed.

S&F in repairs socket outlet multipurpose 2/3 pin, 6/16 Amp, modular type, 2 module complete all as specified and directed.

S&F socket outlet multipurpose 2/3 pin, 6/16 Amp, modular type, 2 module complete all as specified and directed.

S&F in repairs ceiling fan step type regulator modular type 120 Watts, 2 Module, 240 Volt, 50 Hz complete all as specified and directed.

S&F in repairs modular white cover plate with frame 1 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 2 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 3 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 4 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 6 Module complete all as specified and directed.

S&F in repairs Modular metal flush box 1/2 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&F Modular metal flush box 3 Module complete all as specified and directed.

S&F Modular metal flush box 4/5 Module complete all as specified and directed.

S&F Modular metal flush box 6 Module complete all as specified and directed.

S&F in repairs Switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type multipurpose complete all as specified and directed.

S&F ceiling fan regulator rotary type 120 Watts complete all as specified and directed.

S&F in repairs ceiling fan regulator rotary type 120 Watts complete all as specified and directed.

M&L Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F calling bell, AC, 230 volts, single pole complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated), dust and vermin proof, double door, for enclosing/ fixing MCCB, TPN 4 way, 415 volts grade with 125 Amps vertical type insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

S&F in replacement MCCB, four pole, 100 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F in replacement MCCB, four pole, 63 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated) dust and vermin proof, double door, for fixing enclosing/ fixing MCB, SPN 8 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SP, 5 to 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SPN, 32 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40 to 63 Amps current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F sub-main wiring with 2 runs of 6 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. NOTE: Two runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note : Old Fan be deposited to MES Store yard.

S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. Note : Old Fan be deposited to MES Store yard.

Taking down carefully existing serviceable ceiling fan/wall mounted fan, ceiling cable end etc, removing the fan for safe coustody, hanging the ceiling fan with down rod including clamps, hooks, hold fastners etc and connecting up, including making electric connection from ceiling rose or connector to fan complete all as specified and directed

Taking down carefully existing serviceable exhaust fan, ceiling cable end etc, removing the fan for safe coustody, fixing the exhaust fan and connecting up, including making electric connection from ceiling rose or connector to fan complete all as specified and directed

S&F light frosted glass with chrome finish wall lamp 1 x 4 Watts, warm white, body dark grey colour, aluminium die-cast with IP-65 protection including LED bulb complete all as including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Jaguar cat No. JNL-CHR-MB160275211A (E27 LED 4W) or equivalent make of Philips/Bajaj/Wipro/Osram/GE/Havells/Goldmedal

S&F smart extruded aluminium LED batten (4ft) with higher efficacy 1x 20W, 220V, AC decorative box type with driver, warm/cool white (as directed by Engr-in-Charge), double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Bajaj Cat No. BCLAB 20W LED P or equivalent make of Philips/Bajaj/Wipro/Goldmedal

S&F in repairs smart LED light in fittings 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watts, 220 V, AC decorative type with warm/cool white (as directed by Engr-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed, including taking down existing unserviceable earthing complete all as specified and directed.

M&L for 4mm dia galvanised iron or steel wire earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

S&F in repairs sheet steel metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete including one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.

S&F in replacement of Recessed/ Surface mounting 36Watts LED luminaire, prewired with white powder coated CRCA housing with LEDs and fully window acrylic diffuser, suitable for 600x600mm E-grid/POP/ false ceiling complete with all accessories making connection using 3 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/ PVC connector to light fitting and testing etc complete all as specified and directed. Make : Cat part No LULT02S036XW ULTIMA of JAQUAR or equivalent make of BAJAJ/PHILIPS/WIPRO/OSRAM/GE/HAVELLS/GOLD MEDAL

S&F in repairs decorative type 10 Watt, 220 V, LED light fitting 1x10 Watt, metal bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete and all as specified and directed. Make : Cat part No LBLK02X010XN of JAQUAR or equivalent make of BAJAJ/PHILIPS/WIPRO/OSRAM/GE/HAVELLS/GOLD MEDAL

S&F in replacement smart three phase four wire energy meter BIS 16444 : 2015 (Reaffirmed 2020) marked in existing meter board/ floor panels having current range 10-60 Amp, 415 Volts, accuracy class 1.0 complete and all as specified and directed.

S&F in replacement smart single phase four wire energy meter BIS 16444 2015 (Reaffirmed 2020) marked in existing meter board/ floor panels having current range 10-60 Amp, 240 Volts, accuracy class 1.0 complete and all as specified and directed.

Taking down existing unserviceable ceiling fan of any sweep and size from fan hook from different location, disconnecting and sealing electrical line for annual maintenance/ servicing; dismantling various parts of ceiling fan for repair/ replacement, servicing etc., cleaning thoroughly, greasing of ball bearings, oiling of bush bearings, replacing split pin and rubber real, repair/replacement of minor worn out parts, including re-assembling the fan after servicing and replacement of existing major worn out spare parts under ser Item No. 63 to 67 in case required, servicing and hanging in its original location complete with and including making electrical connection from ceiling rose to fan and testing complete all as specified and directed. NOTE: Taking out existing defective major spare parts and fixing new spare parts on fans will be measured and paid separately under ser item No. 63 to 67 here-in-after. The rate quoted shall be deemed to be included for all other minor parts which are essential for smooth functioning of fan i.e. greasing, oiling, split pin, rubber real, PVC canopy, rubber bush, hanging clamp etc. shall be deemed to be included in the quoted rate.

S&F in replacement of stator shaft suitable for fixing top and bottom bearings of ceiling fan of any size complete all as specified and directed.

S&F in replacement of ceiling fan condenser 2.5 Mfd 50Hz, 240 V complete all as specified and directed.

S&F in replacement of ball bearings suitable for ceiling fan 1200 mm sweep complete all as specified and directed.

S&F in replacement of ball bearings suitable for ceiling fan 1400 mm sweep complete all as specified and directed.

S&F in replacement of Gun metal self-lubricated bush suitable for ceiling fan of any size complete all as specified and directed.

Taking down existing unserviceable exhaust fan of any sweep and size from fan hook from different location, disconnecting and sealing electrical line for annual maintenance/ servicing; dismantling various parts of exhaust fan for repair/ replacement, servicing etc., cleaning thoroughly, greasing of ball bearings, oiling of bush bearings, replacing split pin and rubber real, repair/replacement of minor worn out parts, including re-assembling the exhaust fan after servicing and replacement of existing major worn out spare parts under ser Item No. 69 to 72 in case required, servicing and fixing in its original location complete with and including making electrical connection from ceiling rose to fan and testing complete all as specified and directed. NOTE: Taking out existing defective major spare parts and fixing new spare parts on fans will be measured and paid separately under ser item No. 69 to 72 here-in-after. However the rate quoted shall be deemed to be included for all other minor parts which are essential for smooth functioning of fan i.e. greasing, oiling, etc. shall be deemed to be included in the quoted rate.

S&F in replacement of ball bearings suitable for exhaust fan 230/300mm dia sweep complete all as specified and directed.

S&F in replacement of ball bearings suitable for 380/450mm dia sweep complete all as specified and directed.

S&F in replacement of fan condenser square type 1.5/1.85 Mfd 50Hz, 240 V complete all as specified and directed.

S&F in replacement of gun metal self-lubricated bush suitable for exhaust fan of any size complete all as specified and directed.

Supply and fix in repairs exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and directed

Taking down existing unserviceable geysers of any capacity and make from different locations as directed, disconnecting and sealing electrical and water connections for annual maintenance/servicing, removing existing grouted blunt threaded bolts, nuts & washers, dismantling the same for servicing including taking out sludge from inner tank and washing/cleaning with diluted Hydrochloric acid, repair/replacement of minor worn out parts, reassembling including after replacement of existing major worn out spare parts under ser Item No. 75 to 86 in case required, and refixing the same in its original location, connecting all electrical connections and water connections including making good to the disturbed surface and testing complete all as specified and directed. NOTE: Taking out existing defective major spare parts and fixing new spare parts on geysers will be measured and paid separately under ser item No. 75 to 86 here-in-after. However the rate quoted shall be deemed to be included for all other minor parts which are essential for smooth functioning of geysers i.e. indicator lamp, plug top etc.

S&F in replacement heating element threaded type/triangle type/round type with rubber washer (ISI marked), 2.0KW, suitable for 50 ltr Geyser capacity including necessary nuts, bolts and washers complete all as specified and directed.

S&F in replacement heating element threaded type/triangle type/round type with rubber washer (ISI marked), 1.5KW, suitable for 25 ltr Geyser capacity including necessary nuts, bolts and washers complete all as specified and directed.

S&F in replacement Thermostat stem type, 12” long, suitable to adjust up to 70ºC for Geyser complete all as specified and directed.

S&F in replacement Thermostat stem type, 9” long, suitable to adjust up to 70ºC for Geyser complete all as specified and directed.

S&F in replacement thermal cut out stem type ISI marked suitable for any capacity geyser complete all as specified and directed.

S&F in replacement fusible plug made of brass having lead alloy fuse suitable for any capacity geyser complete all as specified and directed.

S&F in replacement pressure release valve chromium plated screws suitable for 15mm dia of any capacity geyser complete all as specified and directed.

S&F in replacement non return valve brass size 15mm dia suitable for 15mm dia GI pipe complete all as specified and directed.

S&F in replacement PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, nipple, check/end nuts with washers, etc, for hot water and cold water connections complete all as specified and directed.

M&L for repairing leakage to geysers of 25 ltrs capacity of any make by spot copper brazing and pressure testing for leakage complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 16 Amps complete all as specified and directed.

S&F socket outlet 3 pin, 16 Amp, flush type complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Dismantling incoming and outgoing pipes from solar water storage tank and solar panel and all electrical components, cleaning completely water tank, solar panel and all the pipes properly and re-connecting and re-assembling the solar water heating system in its original location complete with and including provn of new cable of existing size and testing complete all as specified and directed. NOTE: The rate quoted shall be deemed to be included for all other minor parts which are required for smooth functioning of solar water heating system.

M&L for repair of solar panel including replacement of worn out/ damage accessories as per existing specification and making all electrical and water connections complete all as specified and directed. NOTE: Accessories required for smooth functioning of solar panel shall be deemed to be included in the quoted rate.

Supply, laying, connecting and testing UPVC high pressure pipes all as per ASTM - 1785 sch 80 as per IS-554, with working pressure upto 10 Kg/cm2 of size 15mm dia including fixed complete to walls, ceilings or in floors etc., with all fittings including taking down existing unserviceable complete all as specified and directed.

S&F in repair gun metal, globe or gate valve with ISI mark IS-778 Class-I of size 15mm bore dia wheel head screwed both ends suitable for fitting with UPVC pipe complete all as specified and directed.

S&F in repair Ball brass valves, high pressure, with polythene float and fly nut, with epoxy coated aluminium rod complete screwed of size 15mm bore dia for PVC over head tank inside UPVC/ PPR pipe and fixed complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks triple layer of capacity 250 litres, 100% UV stabilized, rust proof, Algae formation protection, free maintenance, aesthetic design, Cylindrical vertical with closed top, hoisted and fixed in position and connecting up complete all as specified in SSR Part - I complete all as specified and directed. NOTE: PVC water tank should be triple layer (i.e., White layer-maintains water temperature; Black layer-protects from UV radiation; Blue layer-for better visibility inside tank)

Taking down existing unserviceable electric meter of any phase and size from different locations, disconnecting and sealing electrical line for annual maintenance; dismantling various parts of electric meter for repair/ replacement, servicing etc., cleaning thoroughly, re-assembling the meter after servicing, repair/ replacement of damage parts etc., and fixing in its original/ different location complete with and including making electrical connection and testing including sealing the meter complete all as specified and directed.

Taking down existing unserviceable wall mounted fan of any sweep and size from fan hook from different location, disconnecting and sealing electrical line for annual maintenance/ servicing; dismantling various parts of wall mounted fan for repair/ replacement, servicing etc., cleaning thoroughly, greasing of ball bearings, oiling of bush bearings, replacing split pin and rubber real, repair/replacement of minor worn out parts, including re-assembling the fan after servicing and replacement of existing major worn out spare parts under ser Item No. 96 to 97 in case required, servicing and fixing in its original location complete with and including making electrical connection from ceiling rose to fan and testing complete all as specified and directed. NOTE: Taking out existing defective major spare parts and fixing new spare parts on fans will be measured and paid separately under ser item No. 96 to 97 here-in-after. However the rate quoted shall be deemed to be included for all other minor parts which are essential for smooth functioning of fan i.e. greasing, oiling, split pin, rubber real, PVC canopy, rubber bush, fixing clamp etc. shall be deemed to be included in the quoted rate.

S&F in replacement of ball bearings suitable for wall mounted fan 400 mm sweep complete all as specified and directed.

S&F in replacement of Gun metal self-lubricated bush suitable for wall mounted fan of any size complete all as specified and directed.

M&L for repair to existing meter box of any size by welding, filling cavities and other repairs as required, including synthetic enamel painting of the box over a coat of red oxide zinc chrome primer after proper scraping and writing quarter number on each meter complete all as specified and directed.

SUJAN (BID ID -3462184)

M/s VJ ENTERPRISES (BID ID -3471092)

U K construction (BID ID -3471075)