R and R work of Internal wiring and Compound lighting of State Animal Health Centre (SAHC), Fultola, Baruipur in the distict of South 24 Parganas ---SITC of 415 V, 3 phase, 45 KVA Silent type DG Set.

Amount

DG Set - SITC of 45 KVA Silent type DG Set CPCB -IV+ approved comprising of engine with genset controller and alternator both on a common base complete with Fual Tank, Residential Silencer, AVM Pads, Batterys with its leads, First fill of lube oil, in-built AMF Control Panel & Acoustic Enclosure having following specification: Genset output (KVA/KW): 45/36, Genset rating: Prime, Engine rating (Max power @ rated RPM in BHP: 51.8 Min, Aspiration/Cooling: TCAC/Radiator, No. of cylinders/Cylinder arrangement: 4/Inline, Rated RPM: 1500, Governor: Type/Class of governing: Electronic, Frequency regulation: No load to full load: Isochronous, Overspeed trip (RPM): 1650, Air cleaner type/Qty: Dry/01, Exhaust System Maximum allowable backpressure (Kpa): 4.5

Engine Electrical System Make-CUMMINS / KIRLOSKAR /MAHINDRA / GREAVES POWER / ASHOK LEYLAND / EICHER(VECV) Charging alternator voltage/current (DC): 12V/35A, Starter motor rated voltage (DC): 12, Battery voltage (DC)/Capacity (AH)/Qty: 12/88/1 Engine: Direct injection, water/liquid cooled , 4 cylinder, inline, 4 stroke, rated at 1500 RPM, conforming to ISO 3046 / BS 5514 has the following specifications:- Mechanical FIP- Electronic governor- Turbocharger, pulse tuned exhaust manifold, stainless steel exhaust flexible connection- Radiator Cooling, with turbocharged after cooling- Plate type lube oil cooler- Filter –fuel, lube oil- Dry type replaceable paper element air cleaner- Flywheel housing and flywheel to suit single bearing alternator- Starting motor – Electric, battery charging alternator- First fill of lube oil and coolant Fuel System Recommended fuel: HSD, Fuel tank capacity (L):115 Ltr Min Fuel Consumption - LPH @ % Load 100%: 9.8 Ltr, 75%: 7.5 Ltr. Lubricating Oil System Lube oil sump capacity: 8.5 Ltr Min, Lube oil change period (Hours): 500, Lube oil consumption (% of SFC): <0.2, Lube oil filter type/Qty: Spin on/01, Recommended lube oil grade: 15W40 Greaves MaxthermAPI CI4, Oil cooler: Water cooled

Cooling System Max ambient capability (Deg C): 50, Coolant capacity (Engine+Radiator) (L): 20, Water pump type: Centrifugal, gear driven Alternator Specifications Make : STAMFORD / KEC / CG / LEROY SOMER / LEY POWER -Voltage (V): 380-440, Frequency (Hz): 50, Current @ 0.8 PF (Amps): 174, Type: 4P, rotating field, Exciter type: Brushless(PMG optional), Leads: Qty/Type: 6 fixedOptional 12 reconnectable, Voltage regulator: Solid state, Insulation: Class H, Temperature rise (Deg C): 125, Bearing: Qty/Type: 1, sealed, Coupling: Flex disc, Voltage regulation: No load to full load: 2P sensing,±1%, One step load acceptance: 100% of rating, Unbalanced load capability: 25% of rated current. Brushless alternator- Self-excited, self-regulated- Class ‘H’ insulation limited to temperature rise of class H- Salient pole revolving field- Single bearing- Automatic voltage regulator

Acoustic enclosure: Engine - alternator assembly mounted on AV mounts with silencer and S.S exhaust bellow suitably optimized to meet stringent noise emission standards as laid down by MOEF/CPCB- Base rail with draw-out type fuel tank provided with drain plug, airVent, inlet and outlet connections, level indicator, manhole etc- Sub-base fuel tank with 11 hours capacity at 75% load- 24 V dry batteries with connecting leads and terminals- 90% glass RAL9003 white pure polyester powder coated, base in black colour- Water and lube oil drain outlets located on the outer surface- Leading to ease of maintenance and cleanliness.

S & F M.S Exhaust Pipe of 100 mm dia. including connection with existing silencer and S & F Bend, flange, nuts, bolts and washers and necessary fixing materials as required including making necessary welding, as per direction of EIC.

S & F M.S Exhaust Pipe of 80 mm dia. including connection with existing silencer and S & F Bend, flange, nuts, bolts and washers and necessary fixing materials as required including making necessary welding, as per direction of EIC.

S & F type most heavy support structure made of 75 mm x 50 mm x 6 mm channel on both side at a height of 5 RM bottom of which grouted underground by concreate foundation cross supported with 50 x 50 x 6 mm angle horizontally at 4 points for 80 mm (Horizontal run) exhaust pipe from D.G Set to nearest building outside wall, as per direction of EIC.

S & F rain protection canopy, as per direction of EIC.

Making insulation by 2” Fire Proof Glass Wool coved with wire meshed and aluminum clading as per direction of the EIC.

a)100 mm dia Exhaust pipe

b) 80 mm dia exhaust pipe

c) Residential type silencer

Supply & Delivery of Diesel oil for commissioning of 45 KVA DG Set, including carrying & fuel handling charges, as directed by EIC.

Earthing System:- Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil.

Earthing with 65 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. (2 Sets for Body earthing of DG Set & 2 Sets for Neutral earthing of DG Set)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required (for Body and Neutral earthing of DG Set)

Extra for connecting the Earth bar for neutral earthing of DG Set/Earth busbar for body earthing of DG Set to earth electrode/ Metal body, including S & F 50 mm x 6 mm Galvanized (Hot Dip) steel strip on wall/floor with GI saddles & insulating the same by one layer of PVC strip over one layer of ampere tape (for Body and Neutral earthing of DG Set)

Insulating the 50 mm x 6 mm galvanized MS flat incl. S&F of black coloured PVC sleeves etc., after inserting PVC sleeves on 50 mm x 6 mm galvanized MS flat and applying heat properly by skilled technician carefully without damaging the PVC sleeves, as per direction of E.I.C.

Cable Laying:- S&D of the following sizes 1.1 KV voltage grade XLPE/PVC insulated Al. Armoured Cable. (Make: Havells/ Polycab/ Finolex).

1 core x 35 sq.mm. (for Earthing connection with Neutral of DG Set)

Laying of following cables on wall/surface incl. S & F MS saddles & earthing attachments, making holes etc. as necy. mending good damages and painting.

1 core x 35 sq.mm.

S&F of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC insulated Al. armoured cables as below.

1 core x 35 sq.mm.

Finishing the end of following XLPE/PVC insulated Al. armoured cables by crimping method incl. S&F of solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

1 core x 35 sq.mm.

NOTES: 1. The Agency must procure the materials from the manufacture / OEM or from their authorised sales channel so that the standard warranty/support of the manufacture / OEM becomes applicable to the products to be delivered and installed by them. 2. Documents that authenticates such procurement from the manufacture / OEM or from their authorised sales channel and standard warranty/support should be sent from the e-mail of the manufacture / OEM / authorised sales channel to the e-mail of Engineer-in-charge and hard copy of it to be submitted during execution of work/submission of Bill. 3. If any refurbished material is supplied and installed, Penal action will be will be taken as per existing rules. 4. DLP 1 (One) year from the date of commissioning of the DG set.

AMAZE POWER (BID ID -6750806)

JAYBEECO (BID ID -6788821)

SKS PROJECTS (BID ID -6792370)

BHARAT INFOCOM (BID ID -6791358)