PROVISION OF STORAGE SPACE TOILET AND BATHROOM FOR GUARD AT BLDG NO P102 AND PROVN OF PARTITION WALL ALONG WITH HARDSTANDING AND OTHER MISC BR WORKS AT ADG RESIDENCE AT PANGODE MIL STN TRIVANDRUM

Amount

Excavating in trenches, n exc 1.5 M wide and n exc 1.5 M in depth, for foundation, etc or for shafts, wells, cess pits, manholes, pies holes, etc n exc 10 sqm on plan and n exc 1.5 M in depth and getting out in hard / dense soil etc complete all as specified and directed.

M&L for P.C.C. 1:3:6 Type C2 (Using 40mm graded stone agg) as foundation, mass concrete etc complete all as specified and directed.

M&L for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth etc complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 finished even and smooth etc complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm in soil etc complete all as specified and directed.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point etc complete all as specified and directed.

S& F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed.

S&F plain, aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and grith as fixed) 0.56 mm thick etc complete all as specified and directed.

M&L for second class Hard Wood scantling, clean sawn incl all Screws and hooks etc complete all as specified and directed. Note: The value quoted shall be deemed to be included for applying two coats of synthetic enamel paint over a coat of primer on wooden surfaces including preparation of surfaces.

M&L for IInd class hard wood clean sawn plain fillets square, rectangular or triangular in section, secured with nails or brads sectional area exc 13 but n exc 25 sq.cm incl al screws and hooks complete all as specified and directed . Note: The value quoted shall be deemed to be included for applying two coats of synthetic enamel paint over a coat of primer on wooden surfaces including preparation of surfaces.

M&L for Transomes or mullions, straight,for solid frames of any description wrought, framed, double rebated on the solid, rounded or chamfered (including weathering to transome,if required put together with glue, pinned at joints), incl all Screws and hooks etc complete all as specified and directed. Note: The value quoted shall be deemed to be included for applying two coats of synthetic enamel paint over a coat of primer on wooden surfaces including preparation of surfaces.

M&L for two coats of oil bound distemper over a coat of primer including prepartion of new plastered surfaces of wall over 10 cm width or girth etc complete all as specified and directed.

M&L for Applying two coats of acrylic exterior emulsion water proofing painting over a coat of primer including prepartion of new surfaces of wall (up to four storey bldg) as per manufacture's instructions etc complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil etc complete all as specified and directed.

M&L for Hardcore guage exc 63 mm but n.exc. 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface using broken stone or boulders etc complete all as specified and directed.

M& L for Plain cement concrete 1:3:6, Type C2, 75mm thick as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and directed.

M& L for Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 75mm thick etc complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) as in sub base in 100mm thick etc complete all as specified and directed.

M&L for Plain cement concrete 1:4:8 Type D-2, using 40 mm graded stone aggregate as in foundation etc complete all as specified and directed.

M&L for 20mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement mortar 1:2. etc complete all as specified and directed.

M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and directed.

M&L for Moorum filling in floors or pavings laid in layers n.exc 15 cm thick spread levelled and rammed including watering etc complete all as specified and directed.

M& L for Plain cement concrete 1:4:8 Type D2 ( using 40 mm graded stone aggregate) as in sub base in 75mm thick etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding a layer in CM 1:4 for laying floor finishes etc complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.06 Sqm but not exceedng 0.11 sqm in floors etc .set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 as screed to receive tile finish as in skirting and dados etc complete all as specified and directed.

M&L for Rendering 5 mm thick cement plaster on ceiling in cement mortar 1:3, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash etc complete all as specified and directed.

Use and waste Form work to sides and soffits of floor or roof beam , lintels including support , overhangs etc also splays between floors and beams etc complete all as specified and directed.

Use and waste Form work to soffit of suspended slab such as roof slab, floor slabs landing and similar work not exceeding 200 mm thick horizontal or slopping etc complete all as specified and directed.

M&L For reinforced cement concrete type B1 1:2:4 ( 20 mm graded stone aggregate) for Slab supported on walls, beam and columns in floor, roofs, slabs and in shelves and the like etc etc complete all as specified and directed.

M&L For reinforced cement concrete type B1 1:2:4 ( 20 mm graded stone aggregate) beams, cantilevers, bressummers lintel over 1.5m span etc complete all as specified and directed.

S&F TMT bar 10 mm dia and over as reinforcement cut to length bent to shape required, including cranking, bending, spirally for hooping for column hooking ends and binding with and including mild steel steel wire (annealed ) not less than 0.90 mm dia or securing with clips quality confirming to Deformed or twisted bars etc complete all as specified and directed.

All as per iten No 35 here-in-before, but for 6 to 8 mm dia TMT bars as in stirrups

M & L for PCC 1:2:4 type B0 with 12.5 mm graded stome aggregate, 25 mm thick over RCC roof all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1:3 on top of roof slabs mixed with water proofing compound as per manufacturer's instructions, or 3% by weight of cement (Cost of WPC will be measured and paid seperately), finished even and fair complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 , mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions (Cost of WPC will be measured and paid seperately), etc complete all as specified and as directed.

Supply only integral water proofing compound

Supply and fix PVC pipe of bore dia 40mm as in waste pipe to urinal etc complete all as specified and directed.

S&F Plastic waste pipe for Wash hand basin 32mm dia etc complete all as specified and directed.

S & F PVC connection 15mm dia, 450 mm long with 2 Nos brass check nuts with washer etc complete all as specified and directed.

S&F wash basin vitreous china white flat back size 550mm x 400 mm including brackets exclusive of fixing of supply and waste pipe including cutting for and pinning in ends of brackets or erecting stand with grating fixing to floor, making good, etc complete all as specified and directed.

Supply and fix Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed.

S & F PVC (SWR) gully trap 125 / 110 mm including setting and jointing with solvent cement , etc complete all as specified and directed .

S & F Pillar taps 15mm dia cast copper alloy with capstion heads, chromium plated , fancy type, screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm dia pipe etc complete all as specified and directed.

S&F bib tap brass fancy, type CP 15mm dia of pipe etc complete all as specified and directed.

S&F Stop valve of PTMT size 15mm dia ,any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) etc complete all as specified and directed

S&F Angle stop valve of PTMT size 15mm dia any colour high pressure screwed for iron pipe and fixed etc complete all as specified and directed

S&F towel rail 20 mm dia, D type 60 cm long between flanges of Aluminum anodised etc complete all as specified and directed

S&F PVC ventilator , fixed type with solid frame 45 mmx70 mm including louvers frosted glass of size3 mm thick including MS guard bar of 10 mm dia spacing 150 C/C and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with PVC beading including painting to steel surfaces etc complete all as per specified and directed

S&F UPVC pipe pressure rating 10kgf/CM² fixed complete to walls, ceiling or in floors etc of pipe 15mm bore UPVC tubing etc complete all as specified and directed

All as per item No 54 here-in-before but for 20 mm bore UPVC tubing etc complete all as specified and directed

S&F rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 500 ltr capacity incl GI fitting and pipe etc complete all as specified and directed

S&F Vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed .

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore etc complete all as specified and directed

S&F PVC (SWR) bend any radius of bore 50mm etc complete all as specified and directed

S&F PVC (SWR) single T junction equal or unequal with access door of bore 110mm etc complete all as specified and directed

S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement of dia of outlet 75mm etc complete all as specified and directed

M&L for salt glazed stone wave gully traps square or round mouthed, size 150 x 150 mm fixed in cement concrete etc complete all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore etc complete all as type 'P' specified and directed

S&F PVC ( SWR) soil / waste pipe in any length , double socketed with rubber ring jointed laid in trenches or in floors, size 110mmdia bore of pipe ISI marked. etc complete all as specified and directed

Cutting in to existing manholesfor connecting new drains pipe dia 100 / 110 mm making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching etc complete all as specified and directed

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc complete all as specified and directed

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction etc complete all as specified and directed

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 etc complete all as specified and directed

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised etc complete all as specified and directed

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy etc complete all as specified and directed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 20 mm bore etc complete all as specified and directed

Cutting channels, grooves or rebates exc 15cm girth and n exc 30 cm girth, and trimming surface etc complete all as per specified and directed

M&L for Hardcore guage n exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rolled / rammed to a true surface using broken stone or boulders etc complete all as specified and directed

M&L Forming construction joint 300 mm deepx100 mm wide filled with sealing compound etc complete all as specified and directed

S& F Soap dish, vitreous china white approximate size 160X160X90mm etc complete all as specified and directed

Supply and Fix of PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle incl brackets capacity 10 ltrs and connection to pipe complete fancy type etc complete all as specified and directed

S&F PVC Pipe single sockted, in any length with rubber ring joints laid in trenches or in floors 100/ 110 mm dia bore of pipe incl fittings , ISI marked etc complete all as specified and directed

M&L for Concrete bed for drain pipes 100/110 mm dia including forming cradles by using PCC (1:3:6) type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested etc complete all as specified and directed

Supply and fix PVC (SWR) pipe single socketed, in any length with rubber ring joints and fixed to walls and similar work etc 110mm dia bore of pipe incl fittings, etc complete all as specified and directed

S&F PVC (SWR) vent cowl 100/110 mm dia. etc complete all as per specified and directed

S&F PVC (SWR) bend 110 mm dia. etc complete all as per specified and directed

M&L for providing cement concrete 1:2:4 (using 20mm graded stone agg) in coping with necessary form work complete all as specified & directed

M&L for Non asbestos fibre cement building boards decorative type ,4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws on ceiling etc complete all as per specified and directed

M&L For Anodised aluminum snap grid frame work for false ceiling size of panels 605 x 605 mm etc complete all as specified and directed.

S&F Plain mild steel wire,3.15 mm dia galvanised class 3,in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc complete all as specified and directed.

Cutting holes into brick walls built in cement mortor or cement lime mortor and making good in cement mortor 1:3 or cement concrete 1:2:4 type B-1 as required etc complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil etc complete all as specified and directed.

Sand filling/cushioning under floors or in foundations including watering and consolidation etc complete all as specified and directed..

M&L for machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-30 Grade with grey cenent and pigment etc complete all as specified and directed.

M&L for PCC type B1 1:2:4 ( 20 mm graded stone aggregate in kerbs or mud stops rounded or chamfered edges etc complete all as specified and directed.

M & L for Point wiring complete for One light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with pressed steel terminal boxes of suitable size & modules, concealed in walls incl plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as complete. NOTE: Pressed steel terminal boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust incl suitable thick laminated sheet cover plate for mounting switch/sockets/regulator/bell push etc, concealed in wall and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate

All as per ser item No. 92 here-in-before but for One exhaust point controlled by one way switch and regulator etc complete all as specified and directed.

All as per ser item No. 92 here-in-before but for one 5 Amps socket outlet on independent board etc complete all as specified and directed.

All as per ser item No. 92 here-in-before but point wiring with 4 Sqmm FRLS cable and 4 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board complete all as specified and directed

S&F switch piano, flush type, single pole, one way 5 Amp, 240 volt, white or ivory ISI marked etc complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 volts, white or ivory ISI marked etc complete all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin, 5/15 Amps flush type, universal, 240 volts, white or ivory ISI marked etc complete all as specified and directed.

S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal etc complete all as specified and directed.

Supply and fixing surface and wall mounted LED batten type light fittings, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver for and including 1 x 20 watt ultra bright LED polycarbonate tubelight 1200mm, 865-CRI 80, 6500K etc including prewired with 3 core flexible cables of size 24/0.2mm with copper conductor from connector to light fittings & connecting up complete all as specified and directed.

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site complete all as specified and directed

S&F MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning and taking down old unsv one from the site complete all as specified and directed

All as per ser item No. 102 here-in-before but for MCB SPN 32 Amps complete all as specified and directed

Supply and fix sub main wiring with 2 runs of 4 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including non metalic PVC conduit with all fitting such as Tee, Bends, Elbow, etc., fixed surface on wall/ceiling including 4 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete. NOTE: Two runs of 4 sqmm copper cable and one run of 4 sq mm copper cable alongwith non metallic PVC conduit will be measured as one length

Supply and fix LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and directed.

Supply and Fix exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades including frame and louvers etc complete all as specified and directed.

AKASH CONSTRUCTIONS

Satheesh Kumar

B.LAMBODHARAN

SHILPA ENGINEERS AND CONTRACTORS

DJ GROUP

S K ENGINEERS