COMPREHENSIVE MAINTENANCE OF CERTAIN MINOR UNITS AND CERTAIN ALLIED ELECTRICAL WORKS IN NORTH ZONE UNDER GE NORTH BINNAGURI

Amount

SCHEDULE `A' ( CIVIL WORK) Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n exc 4 sqm each etc including removing material from work site complete all as specified and directed.

Supply and fix Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life complete all as specified and as directed

Supply and fix Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and as directed

Supply and Fixing solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and as directed.

Supply and fix 100mm size Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.

Supply and fixing 125 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

Supply and fixing 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified.

Supply and fixing 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply and fixed in repairs 75 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and directed.

Supply and fixing in repairs 150 mm size hasp and staple, safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screwscomplete all as specified.

Supply and fixed in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and including removing material from work site complete all as specified and directed.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete with glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair factory made steel window with side hung shutters including projecting type hinges with steel handles, and steel peg stay, fixing lugs complete without glazing bar devetailed or welded including one shop coat of red oxide primer compete all as specified and as directed.

Supply and fixing in repair factory made steel windows or ventilators, top hung type, with or without glazing bars complete all as specified.

Supply and fixing in repair factory made steel window or ventilators with top/side hung shutters including projecting type hinges, with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified.

Supply and fixed in repairs mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Hacking out old broken glass ( any thickness , size , quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

Supply and fixing 3 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Supply and fixing 3 mm thick figured glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.

Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructionscomplete all as specified top surfaces finished even and smooth without using extra cement complete all as specified. (WPC shall be apply in second layer and measured and paid separately)

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.

Material and labour for rendering 5mm thick on concrete surfaces in ceiling , in cement and sand mortar 1:3 complete all as specified

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Material and labour for preparation of newly plastered and applying and applying a coat of alkali resistant primer ( before application of colour wash) and applying two coat of colour wash complete all as specified.

Material and labour fo preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour fo preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old plastered or unplastered surfaces of wall by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of colour wash on old decorated surfaces of wall including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade including wall putty/white cement whereever required to fill the wall cracks/holes complete all as specified and as directed. complete all as specified.

Material and labour for preparation of old treated plastered surfaces of walls by applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying acrylic based distemper emulsion, two coats, white or any tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material and labour for preparation of old treated surfaces of walls and applying wall care white (Putty) thickness and sand papering surfaces to achieve smooth surfaces and applying two coats exterior emulsion paint 100% acrylic, white or any tinted, over a coat of cement based exterior primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .

Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, ,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:4 complete all as specified (Note : screed bed shall not be measured and paid separately).

Material and labour for glazed ceramic coloured / digital printed of size (300 x 200 mm / 300 x 450 mm x 7 mm thick ) as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:3) complete all as specified and as directed. (Note : screed bed shall not be measured and paid separately).

Material and labour for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish complete all as specified.( Screed bed shall not be measured and paid separately).

Material and labour for prepolished chemically treated coloured chequered cement concrete tiles of size 300 mm x 300 mm x 25 mm thick set, jointed and pointed in neat slurry in floors and steps with grey cement and pigments laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified ( screed bed shall not be measured and paid separately).

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified including dismantling PVC water tanks, including removing ball valve and removing unserviceable tank from work site complete all as specified

Supply and fixing in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms)

Demolition of existing roof treatment complete of any description and in Taking down existing tarfelt including tiles, lime concrete and screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof , cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.

Material and labour for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement for receiving treatment complete all as specified and directed.

M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thick weight not less than 3.6 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of Aluminium paint over APP membrane.) (iv) Treatment shall be done by authorise applicator of the firm

Demolition of Cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for including reinforced cut to facilitate demolition complete including removing demolished material from work site all as specified and directed.

M&L reinforced Cement concrete in cement concrete mix 1: 11/2 :3 type A-1 slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Use and waste of Form work to flat soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) surfaces finished rough in forms complete all as specified.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide, surfaces finished fair in forms complete all as specified.

Material and labour for Mild steel deformed or twisted bars ( TMT) 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in sub base for laying floor finishes complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site,15 mm bore dia all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal of unserviceable pipe from work site, 20 mm bore dia all as directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore dia, including new fittings complete all as specified ( Note:- Refixing means including cleaning down existing pipes and fittings. )

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades,shelves, lintels,etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc.,and making good, cutting not exc 10 cm girth complete all as specified.

Supply and fixed in repair PTMT ( Polytetra Methyllene Terephthalate ) Bib taps suitable for 15 mm bore pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified .

Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.

Supply and fixed in repair CP angular stop cock fancy type, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

Supply and fixed in repair, CP stop cock ( concealed type) long fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Supply and fixed in repair, 15 mm bore dia of pipe , chromium plated ,pillar taps, fancy type, cast copper alloy , with capstan heads, screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Supply and fixed in repairs low level flushing cistern (dual-flush), 9-10 litres capacity ISI marked embossed moulded from virgin poly propylene including flush pipe and PVC connection pipe of 450 mm long complete all as specified and directed.

Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and as directed.

Supply and fixed in repairs vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified.

Supply and fixed in repairs of Vitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

Supply and fixed in repair PVC waste pipe with CP waste coupling including flexible suitable for wash hand basin or urinal, 32 mm dia complete all as specified.

Supply and fixed in repairs of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Supply and fixed PVC (SWR) bends 110 mm dia bore with acess door fixed to walls or fixed to steel gutter complete all as directed.

Supply and fixed for 110mm dia PVC (SWR) junction `T' equal or unequal with acess door complete all as specified and as directed.

Material and labour for 40 mm thick PCC (1:2:4), type B-1 (using 20 mm graded stone aggregate ) as in flooring including finishing the surface even and smooth with using extra cement complete all as specified and as directed

Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; pathway / hardstanding etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified.

Supply and fixed in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work flat or sloping complete all as specified.

ELECTRIFICATION INTERNAL AND EXTERNAL Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material & Labour for consealed type point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including PVC conduit of adequate size having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification), including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, connected to main switch / DBs or common earth dolly for one light / fan point / exhaust point controlled by one 5 Amps one way switch complete all as specified and as directed . Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.83 here-in-before but for one socket out let 5/6 amps point on the independent board

All as per item No.83 above but One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No.156 above but One bell/buzzer point controlled by one bell push button

All as per item No.136 above but One light point controlled by two way switch 5/6 amps.

Material and labour wiring for 5/6 pin 6/16 Amp switch socket combination on independent boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases pinning in for concealed conduit wiring and making good of disturbed surface n exc 15 cm girth complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, two ways complete all as specified.

Supply and fixed socket 2 in 1, 5 Pin, 5/6 amps, any type complete all as specified and as directed.

Supply and fixed socket 2 in 1, 5 Pin, 5/16 amps, any type complete all as specified and as directed.

Supply and fixed in repair switch piano flush type, single pole , 15/16 Amps, one way complete all as specified.

Supply & fixed Bell push , flush type , 5/6 amp complete all as specified.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply and fixed in repair switch in repairs socket combination 2 and 3 Pin, 5/6 amps, multipurpose of any type flush type controlled by one switch complete all as specified.

Supply and fixed in repairs switch socket combination 2 in 1, 6 pin 5/6 amps and 15/16 amps multipurpose, of any type complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings including LED lamp of 7 watts, 230 volts Base-22 complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supply & fixed in repairs LED white glass Lamp 1x14 Watts, 230V Base-22 complete all as directed.

Supply and fixing in repairs of LED light fittings 1 x 18/20 watts 230 Volt white powder coated slim box type batten made of formed CRCA with snap on installer LED lighting fixture with and including 1x18/20 watt T8 double side connection retrofit LED tube with G13 lamp holders, connector block, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable up to cealing rose complete all as specified and directed. Make : Havells Cat No: REGALBATTEN8 UPTO 1 x 22W SSBSWH & Cat No: PHOTONULTRA 1213T8 SSTL20W LED 865 SPC (Tube) or of equivalent make as specified in list of makes

Supply and fix in replacement of LED tube light 4 feet 1 x 18/20 watts energy efficient T8, 230 Volt warm light complete all as specified. Note : PHOTONULTRA1213T8SSTL20W LED 865SPC or equivalent make as specified in list of makes.

Supply and fixing in repairs LED tube light fittings 1 x 9/10 watts energy efficient, 230 V incl 1x9/10 watt LED tube, surface / wall mounted LED batten with aluminium housing and integrated driver including holders, connector block etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable all as specified and directed. Make : Havells Cat No LUMILINEPLUSBS10WLED865SPCSS or of equivalent make as specified in list of makes

Supply and fixing in repairs bi-pin holder suitable for 20/40 Watt T/L fitting complete all as specified and directed. Make : Surya/CG/Bajaj.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm complete all as specified and directed.

Supply and fixing in repairs hylam sheet 3 mm thick white in colour round type of size 80 mm dia complete all as specified and directed.

Supply and fixing in repairs of Post top laterns made up of high grade unbreakable polycarbonate materials suitable for mounting on gate / pole complete with and including all accessories internally pre-wired with and including LED lamp 12 Watt complete all as specified and as directed. Make Surya Cat No SLE PT 12W-GP250 or of equivalent make as specified in list of makes.

Materials and labour for Sub main wiring with 2 runs of 6.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Materials and labour for Sub main wiring with 2 runs of 4.00 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core flame retardant cable (FRLS) of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed flame retardant cable (FRLS) with stranded copper conductor as continuous earth wire connected to main switches DBs or in common earth dolly, drawn through and including PVC rigid non- metallic PVC conduit / casing and capping ISI marked , medium garde of adequate size with all conduit / casing and capping accessories ISI marked as required complete all as specified and as directed including taking down old unserviceable / burnt / damaged one. [NOTE : Two run of sub main wiring cable along with one run of earth wire and one run of PVC Conduit / casing and capping shall be measured as one length]

Supply & fix sheet metal enclosure for 8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up including taking down old unserviceable one including MCCB / MCB complete all as specified and as directed.

Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs MCB SPN 40 to 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed in repairs for Single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessry connection complete all as specified including taking down old one

Taking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside for reuse and removing un-serviceable bricks from site complete all as specified and as directed. Note : The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule.

Supply and fixing/laying LT underground electric power cable,of size 25 sqmm 3.5 core, crossed linked XLPE insulated, galvanised steel strip or wire armoured / PVC insulated armoured aluminium cable 1100 volts grade, complete all as specified laid in trenches / laid under floor or fixed neked with walls/on poles / in ducts etc (Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items).

Supply and fixing/laying LT underground electric power cable,of size 16 sqmm 4 core, crossed linked XLPE insulated, galvanised steel strip or wire armoured / PVC insulated armoured aluminium cable 1100 volts grade, complete all as specified laid in trenches / laid under floor or fixed neked with walls/on poles / in ducts etc (Excavation, earth work, sand cushioning, protection brick / tiles / block clamps nuts bolts washers and pipe shall be measured and paid separately under appropriate items).

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, cables etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for laying well burnt old size bricks, Fly Ash, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Laying only old burnt old size bricks, straight or curved on plan laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Note: Brick shall be obtained from item No.127 here-in-before.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness shall only be considered for payment

Supplying and fixing 40 mm bore dia galvanised mild steel pipe /tubing, light grade complete with all fittings, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and directed. Note :- Excavation & Earth work shall be measured and paid separately)

Taking down old unserviceable street light fittings without damaging and dipositing to MES store yard complete all as directed

Supply and fixing 30 watts LED street light luminaire with high power LED and unique peanut lens to ensure uniform light distribution ,higher spacing between poles and maintence free system of not less than 30 Watts IP 66 type incl standard fittings pressure die cast aluminium housing, heat reistant toughened glass, epoxy powder coated finsh complete with Electronic driver, Surge protector not less than 5 KV (internal & external) and all accessories duly prewired complete all as specified and directed. (Make : Havells Cat No ENDURACITYLITEPLUS30WLED757SASYBOPC or equivalent to make as specified in klist of makes.

Supply and fixing 45 watts LED street light luminaire with high power LED and unique peanut lens to ensure uniform light distribution ,higher spacing between poles and maintence free system of not less than 45 Watts IP 66 type incl standard fittings pressure die cast aluminium housing with heat reistant toughened glass with epoxy powder coated finsh complete with Electronic driver, Surge protector not less than 5 KV and all accessories duly prewired complete all as specified. Make: Havells Cat No ENDURACITYLITEPLUS450WLED757SASYBOPC or equivalent to make as specified in klist of makes.

Supply and fixing in repairs street light bracket made out of GI pipe light grade 40 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.5 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and directed.

Digging out incoming and outgoing cables of any sizes from loops near junction box/ feeder pilar box in trenches, cutting burnt out uninsulated portion of cable and relaying /refixing in trenches & returning, refilling the excavated soil and connecting the cables with bus bars including provision of suitable size of aluminium lugs complete all as specified and as directed.

Supply & fixing pole junction box (Loop IN Loop OUT) of size 250mm x 190mm x 150mm , made out of 2.00 mm CRCA sheet CPRI approved factory made, weather, dust & vermin proof with front door and suitable locking arragement including applying two coats of Powder coated paint over exposed external & internal surfaces with three phase and neutral busbar of size 20x3 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and one no SP 6 Amps ‘C’ series mounted on DIN rail including dismantling / taking out old unserviceable any type of busbar box from existing position all complete as specified and directed. (Note :- Making suitable nitch to taking out the junction box from existing position and cutting the existing pole foundation and making good disturbed surface with required PCC /Plaster work and the same shall deem to be included in the unit rate.)

Material and labour for one run of 4 Sqmm 3 Core (Nominal Area) PVC Sheathed multi stranded unarmed aluminium conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) in existing position from pole junction box to light fitting all complete as specified and directed.

Supply and fixing unplasticised PVC pipes of pressure rating 10kgf/cmSq of 20 mm bore and 3mm thick fixed with MS flat iron clamp of size 20X3 mm in every 1.5 meter length of pipe including dismantling of old unserviceable any size and type pipe complete all as specified and directed.

Supply and fixing in repairs Power contractor 70 amps, 3 Pole 415 Volts ,AC 50 Hz comfirming to IS / IEC 60947-4-1 & IEC 60947-4-1 complete all as specified. Make: L&T Cat No: CS97076 MNX 70 or equivalent make as specified in list of makes.

Supply and fixing multifunctional Digital type timer Switch 240 volts AC Single Phase Make :- Legrand, Cat No:- 004764 Astroex-D21/L&T/Schneider.

Material and labour for applying two coats of aluminium paint to steel tubular pole 9.00/9.50 mtr long including cross arms/street light bracket after preparation of existing painted surface including marking the strips of one feet each on pole with red and yellow flourscent synthetic enamel paint two coat upto 4 feet from the bottom of pole (Total 4 Nos strip of one feet each) and re-numbering of pole approved size of letter ( Example : CZ- 001) with synthetic enamel paint on black colour background and white colour lettering complete all as specified and directed

Shri Amarnath Sah

N K Construction

M/S JAGDISH PRASAD AGARWALA