Construction of Interlink Chain Fencing

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil upto all leads and lifts and as per direction of Engineer In Charge

Structural steel work riveted, bolted or welded in built up standard/hollow sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, all complete. (TATA, Jindal, (Hisar),Prakash Steel, Bhushan Industries) including carriage of material upto all leads and lifts and as per direction of Engineer In Charge.

Providing and fixing of G.I. wire fencing, 5mm thick corresponding to SWG-6, 75mm x 75mm mesh with all taxes and including carriage of material upto all leads and lifts and as per direction of Engineer-In-Charge.

Providing and laying in position cement concrete of 1:3:6 (1 Cement :3 coarse sand):6 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering in all works upto plinth level including carriage of material upto all leads and lifts and as per direction of Engineer In Charge

Providing from work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm . So as to give a fair finish including centering, shuttering , strutting and propping etc. and removal of the same for insitu-reinforced concrete &plain concrete work in Foundation , footings basis of columns etc. and mass concrete, Flat Surfaces such as foffits of suspended floors, roofs, landings and the like, vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like, Columns, pillars, posrs and struts- Square, rectangular or polygonal/ circular or curved in plan , Stair cases with sloping or stepped soffits including landing, Sides and soffits of beams, beams haunchings, cantilevers, bressumers and linters not exceeding 1 mtr. in depth in all heights from floor. i/c carriage of materials of all leads and lifts as per Engg. In Charges

Painting two coats of approved brand (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, scales and other foreign matter with wire brush and paint other than white.