Beautification to Somanahalli Tank in Maddur Taluk

Beautification to Somanahalli Tank in Maddur Taluk

Cutting and removing jauliflora bushes upto 1.5 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all lead and lifts and as direct...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and ...

Preparing slope of existing bund ( without pitching ) for abutting fresh embankment to strengthen the existing bund by removing grass and other vegitation including disposing off the mat...

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting...

Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils...

Providing and laying in position plain cement concrete Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/bas...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0...

Addition of Formwork, cenetering & Scaffolding for Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other paral...

Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking...

Steel Fabrication - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of...

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coa...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing park Bench made out of three line Dressed Sadarahallu Granite Slabs not Less than 100mm thick. The bench Shall be 1450mm Long X 400 mm wide 65 mm thick three line dressed sadarall...

Growing of Hedges- Digging trench of size 1mx0.30mx0.45m and filling 50% of the trench with top soil and remaining 50% trench with1:2:3 proportion of sand (0.0112), FYM (0.0224cum) red earth (0.0336cu...

Supply and Plantaion of Growing of Hedges- plants and as per directions of Engineer-in-charge.

Pergolas (8ft x 8ft x 8ft) as per ar/vendor drawing construction in approved Ganite stone including providing and fixing stone for different type of construction work like ornamental piller, sill, per...

Fabrication, Supplying, Erection, Testing and Commissioning of ...... ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded pol...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 1000 mm Sta...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly ...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. and as per directions of the Engi...

Supplying of 1.1 kV 10 Sqmm, 4 Core, (10 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armourin...

Supplying of 1.1 kV 50 Sqmm, 3.5 Core, (16 GI Strips - 4 x 0.8 mm) XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armour...

Providing and laying Double wall Corrugated hDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 2.5 to 25 Sqmm and as per directions of the Engineer-...

Supplying Aluminium End Terminal (Lug) 10 Sqmm and as per directions of the Engineer-in-Charge.

Supplying Aluminium End Terminal (Lug) 50 Sqmm and as per directions of the Engineer-in-Charge.

Pipe Grounding with rounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg and Good Quality well burnt Charcoal ...

Supplying and running of 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/KM and as per directions of the Engineer-in-Charge.

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof,IP65(WeatherProof),rust proof, dust proof,water proof...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50...

Supplying, fixing and wiring Electronic Trivector Meter(ETV) 5 to 32/63A three phase 4 wire whole current class-1Accuracy Energy Meter. and as per directions of the Engineer-in-Charge.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. and as per directions of the Engineer-in-Charge.

Supplying 100 A 4 x 30 x 6 mm Aluminium Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on ph...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C'Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying of PVC Pipe 40 mm Dia (Extracted from Vol-6, PWD Ele SR Sl No. 4) and as per directions of the Engineer-in-Charge.

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947....

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. and as per directions of the Engineer-in...

Supplying &fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.63Aand as per directions of the Engineer-in-Charge.

Epoxy Terminating Kit (Pot head) suitable for 1.1 kV, LTUG Cable.Up to 4C x 50 Sqmm and as per directions of the Engineer-in-Charge.