DEMOLITION OF OLD AND DILAPIDATED BLDG AND PROVN OF OFFICE CUM REST ROOM FOR DUTY OFFICER ORDERLY OFFICER AND TECHNICAL STAFF AT AFS MANDORE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out as soft/disintegrated rock all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5 m but n exe 3.0 m in depth and getting out as soft/disintegrated rock all as specified and directed.

Removing excavated material i.e.soft/disintegrated rock exc. 1.5km but n exc. 5 m and depositing where directed complete all as specified.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming of soft/disintegrated rock in layers not exc 25 cm.

Rough excavation not exceeding 1.5 m deep and getting out any type of soil all as specified and directed.

Forming embankments of soil including raising (or lowering) earth, spreading in layers n exc. 30cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and directed.

M&L Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and directed.

Formwork to flat smooth finished surfaces of concrete sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to better complete all as specified and directed.

Formwork square, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface complete all as specified and directed

Formwork to flat Rough finished surfaces of concrete sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

Formwork to flat Rough finished surfaces of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed

Formwork to edges of concrete slab flats for rough finished surface of concrete, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified.

Formwork to flat Rough finished surfaces of concrete to chullah hoods, chajjas, troughs and similar items including edge complete all as specified and directed.

S&F for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,Beams,footing, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F for TMT steel bars 6-8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab,hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) for chajjas complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) for beams,roof beam,lintel beam,cantilevers bressummers, lintels over 1.5m complete all as specified and directed.

M&L for Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

M & L for ATT Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete all as specified and directed

M & L for ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M & L for ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M & L for ATT Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

M&L for 75 mm thick cement concrete type D2, 1:4:8 (40mm stone aggregate) as in sub base complete all as specified and directed

M&L for Pre-cast cement concrete Type C1 1:3:6 (20 mm graded aggregate) set in CM 1:6 block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L for precast cement concrete Type C1 1:3:6 (20 mm graded aggregate) set in CM 1:6 solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls as partition wall complete all as specified and directed.

M&L for cement plaster in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed

M&L for cement Plaster in CM 1:3, 5mm thick on ceiling finished even and smooth without using extra cement complete all as specified and directed

M&L for cement plaster in CM 1:4, 15 mm thick on external surface finished even and smooth (without using extra cement) complete all as specified and directed

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer or mortar 15mm CM 1:4 complete all as specified and directed

M&L for glazed ceramic tiles,coloured, 450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on brick or concrete surfaces all as specified and directed.

M&L for 600mmx600mmx9 to 10 mm thick vetrified tiles as approved in floor /skirting (in any pattern) and jointed with neat cement slurry over 15 mm thick cement screed in CM 1:4 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed.

S&F aluminium anodised frame for doors, aluminium grill,windows,ventilator,partitions powder coated (min thickness 50 microns) complete all as specifed and directed

S & F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.

S&F Sheet glass of 5.5 mm, ordinary quality and glazing with or without oil putty or fix with aluminium beading in square exc 0.5 sq. m in each pane fixed with beads and metalclips/pins complete all as specified and directed.

Preparing of new surfaces, plastered or unplastered and applying three coat of white wash on ceiling complete all as specified and directed

Preparing of new surfaces, plastered or unplastered and applying two coat of oil emulsion distemper on walls over one coat of alkali resist primer over a thin layer of putty complete all as specified and directed

Preparing of new surfaces, plastered or unplastered two coat of cement base paint over one coat of primer on external walls complete all as specified and directed

Supply and laying 25mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 20mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

Supply and laying 15mm bore tubes, galvainzed steel, medium grade, with all fittings and fixed complete on walls and ceilings or laid in floors all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20mm brass gate valve and 20 mm bore ball brass valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic plastic ball screwed for iron pipe and fixed. (Minimum weight of ball valve - 210 gms)

S&F 15 mm bore bib taps fancy type cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.

S&F 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore fancy type stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union.

S&F 15 mm bore brass chromium plated bib cock two in one with angle cock including fixing to steel pipe or union.

S&F brass chromium plated health faucet of 15 mm bore complete.

S & F Vitreous China urinals Half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F PVC waste pipe of 32 mm bore of suitable length for WHB/urinal/sink complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm dia pvc waste pipe fixed complete all as specified.

S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, PVC valveless, syphonic action type, flushing cistern, low level, 10 litres capacity, white, with inlet, ball valve, float and handle including brackets including PVC flushing pipe, 32 mm dia and fixed complete all as specified.

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F stainless steel soap dish made of stainless steel 1.00mm thick, approximate 150x150 mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in grating doom 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.

S&F Pressed steel frames size 165x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

M&L for PCC type C-0, 1:3:6 (12.5mm stone aggregate) as in frames complete all as specified and directed.

M&L for 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats but divide into square with with plain, chamfered or rounoded, mitred and rebated sash bars, any numbers.

S&F second class HW rail and style Plain framed, 35mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F aluminium handles, cast type, anodized, of size 150 mm complete all as specified and directed

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 3 mm thick glass pin headed type, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

M&L for 110 mm dia PVC (SWR) pipes singlesocketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls including brackets and complete all as specified.

M&L for 75 mm dia PVC (SWR) pipes singlesocketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm dia bends PVC (SWR) bends complete all as specified and directed.

S&F 75 mm dia bends PVC (SWR) bends complete all as specified and directed.

S&F 100mm dia PVC (SWR) single T, equal or unequal complete all as specified and directed.

S&F 75mm dia PVC (SWR) single T, equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 100mm dia fixed complete all as specified.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

M&L for preparation of new plastered surfaces and applying two coats of Polyurethene(PU) acrylic based water proofing liquid compound over one coat of diluted self priming with reinforcing fabric sheet as per manufacturer instruction to stop leakage/seepage from roof/wall complete all as specified and directed for work in building/structure of any height.

Preparation of newly surface any description, not otherwise, described, over 10cm width or girth and apply two coat of synthetic enamel paint on wooden surface over one coat of pink primer complete all as specified and directed.

Supply only integral water proofing compound ISI marked.

M&L Point wiring complete with 1.5 Sqmm single core multi standard copper conductor PVC FLRS insulated unsheathed cable in and incl PVC Conduit concealed with accessories existing pressed steel terminal boxes (sunk in wall) including new 3.00 mm thick plastic laminated sheet top cover with 1.50 Sqmm insulated unsheathed PVC covered copper conductor for common earth and connecting to earth dolly for :- (a) One light point controlled by one one way switch

(b) One fan point controlled by one one way switch

(c) One socket out let 5 Amps on the same board

(d) One socket out 3 pin 5 Amps on the independent board.

All as per item above but with 2.5 Sq mm single core multi standard copper conductor cable for 6 pin 15 Amps socket out let on independent board.

S&F switch flush type 5 Amp, 240 V single pole one way ISI Marked.

S & F Socket outlet 3 pin, 6A, flush type complete.

S&F switch socket combination 2 in 1,5 Amps flush type

S&F switch socket combination outlet 6 pin ,6/16 Amps flush type

S&F ceiling rose, 3 Terminal Point/PVC/polycarbonate, isolated body.

S&F lamp holder , PVC /Polycarbonate type with back plate suitable for batten fitting complete with necessary wire connection etc.

Supply and fixing fan electronic regulator 300w step type all as specified and as directed by Engr-in-Charge.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar 415 V, 4 way double door Triple pole & neutral link.

M&L for sheet metal enclosures distribution board where MCB to be used with 200 Amps rated bus bar CL-IP-43 240 V, 8 way single pole & neutral link .

M&L in replacement for MCB single pole 6-32 Amps, 240 V .

M&L in replacement for MCB single pole & neutral 32 to 63 Amps, 240 V .

M&L in replacement for MCB Triple pole & neutral 63 Amps, 415 V .

Supply and fixing LED Tubelights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

S&F sub main wiring with 2 run of 6 Sq mm single core copper conductor cable drawn through in rigid PVC conduit ISI marked with fitting and 6.0 Sq mm single core copper conductor cable for continues earth wire all as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm 6.0mm thick, buried directly in ground (earth pith not less than 2.25 mtr deep below ground level) with top edge of plated not less than 1.5 mtr below normal ground level connected toincl galvanized iron or steel earth lead wire 4.0mm dia by mean of bolts nuts check nuts & washers of galvanized iron or steel pipe 15mm dia medium grade and connected to main switch board watering pipe shall be 20mm dia GI medium grade incl excavation earth work in any type of soil pit RCC cover complete.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specifed and as directed.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specifed and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

M & L Cutting in position and providing Tee 25x15mm screwing the existing GI tubing for addn/altns of size 25 mm dia complete all as specified and as directed.

S & F GI Tubes 15 mm dia, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply & fix Bib taps brass chormium plated with curtch or butterfly handle complete all as specified and as directed.

Supply & Fix Valve stop screwed supplied and installed complete for size 15 mm dia. complete all as specified and as directed.

Supply & Fix PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply install testing and commissioning of desert cooler electric driven single phase having nominal air flow capacity 1800 cum/hr complete and with frame made out of 40x40x6 mm angle iron frame and 1.5mm sheet thickness of suitable stand size complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete.

M&L for providing cement concrete 100 mm thick Type D-2, 1:4:8 in foundations, filling and mass concrete and complete all as specified.

M&L for sand filling under floors or in foundations 25 mm thick in cluding watering and consolidation and complete all as specified.

M&L for Machine pressed precast concrete interlocking paver blockany shape and size confirming to IS 15698-2006 of 80 mm thickness , M-40 grade with grey cement and pigment and complete all as specified.

M & L PCC cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified.

M&L for removal of excavated material to distance exc 1.5 Km but n.exc 5 Km and complete all as specified.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.

M & L for Salt glazed stone ware drain pipes of 150 mm internal dia. Meter grade “A” laid in trenches and jointed.

S&F salt glazed stoneware gully traps of size 150 x 150 mm, square or rounded mouthed, type `P' fixed in CM 1:6 and complete all as specified

M&L for precast cement concrte block masonery withsolid blockas exc 10 cm in width and setting in cement mortar 1:4 type C1 1:3:6 (20 mm graded aggregate ) complete

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified.

M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10 cm thick, 25 cm to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete as in manhole cover and complete all as specified.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles in any possition, any palce all as specified and as directed.

Dismantling of stone slabs in roofs, suspended floor, chajjas, landing etc any thickness and jointed in any morter.

M&L for demolition of Concrete of any description and in any position not otherwise specifically provided for complete.

M & L for dismantling of 80 mm GI Pipe and proper rerouting / refixing of same pipe with complete connection at suitable place directed by engr in charge.

S & F tubes Medium grade galvanised with all fittings as Tees, bends, etc laid in trenches of size:- (a) 25 mm bore

(b) 50 mm bore

(c) 80 mm bore

Excavation in trenches n.exc 1.50 m wide & n.exc 1.5m deep for taking out / laying pipe line & getting out in hard/dense soil.

Removing excavated soil n.exc 50m above the starting point

S & F gate valves gun metal with iron wheel high pressure screwed both ends for iron pipe or for union and fixed or following sizes:- (a) 25 mm dia

(b) 50 mm dia

M & L for cement concrete in foundations surfaces filling and mass concrete type C2,1:3:6(40 mm graded aggregate) .

Cutting cast iron pipes and reducing to required length for inseration of new branch tees valve complete all as specified and as directed.

Supplying, Laying, Jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 3.5 core 25 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge.

Supply and fix of GI tubing Light grade 50mm incl all accessories for protection cable complete all as specified and directed in engr-in-charge.

PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in foundation of poles etc filling and mess concrete complete all as specified.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub- base complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate in plinth protection. Concrete shall be laid in alternate bays n. exc 3 m in length finished fair and even completer all as specified.

S&F 15 mm bore fancy type concealed stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S & F stainless steel curtain rod with SS fixing bracket complete all as specified and directed.

S & F 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

D DEV COMPANY

DEV INDUSTRIES

Savitri Enterprises