Special repair of Govt. Degree College at Nagrota Bagwan in Distt Kangra (H.P.). (SH-Construction of stage in campus, P/F aluminium work, glass panes, B.P. sheet, painting and other civil work etc )

Amount

Providing and fixing anodised / colour coated aluminium work (Shampion shade) for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for doors windows and ventilatiors and glazed partitions frames. All complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing anodised/ colour coated aluminium work (Shampion shade) for door, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws for shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) all complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing M.S. B.P Sheet 1.66mm to 2mm (One point sixty six to Two milimetres) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete within all leads, lifts of materials and other incidentals .

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white complete including entire carriage of materials within all leads lifts and other incidentals and as directed by the Engineer-in-Charge.

Providing and fixing 4mm (Four millimetres) thick glazing with glass panes in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm. (Ten kilogram/squaremetres) complete and as directed by the Engineer-in-Charge, including entire carriage of material within all leads, lifts and other incidentals.

Providing and fixing heavy duty sliding locks for aluminium windows including all necessary accessories and fitting complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing heavy duty aluminium windows double wheel for sliding windows including all necessary accessories and fitting complete as per architectural drawings complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 100mm (One hundred millimetres) diapipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm (Four point five kilogram/square) including filling the joints with approved adhesive complete and as per direction of Engineer-In-Charge including entire carriage of materials within all leads, lifts and other incidentals.

Providing and fixing Plain bend 100mm (One hundred milimetres) diametres size on wall faces PVC (D-Plast) for rain water pipes including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.

Providing and fixing 100mm diametre M.S. holder bat clamps of approved design to P.V.C. rain water pipe embedded in and including cement concrete blocks 10x10x20cm of 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etc; complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.

Providing and fixing 10mm (Ten millimetres) thick full body anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mm (Six hundred into Six hundred millimetres) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Steel work welded in built up sections/tubler section, trusses and framed work, including cutting, hoisting fixing in position complete and applying a coat of red lead paint in gratings framed gaurds, bars, ladders, railing, brackets and similar work, including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing transparent polycarbonated sheet in roofing including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers including all fixture/jointing, sealing etc; complete lying in all respect within all accesoriees as required as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers all fixture/jointing sealing etc; complete lying in all respect within all accesoriees as required as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals. with all accessories as required as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing ridges or hips 60cm (Sixty centimeters) over all with 0.60mm (Zero point Sixty millimeters) thick prepainted sheet roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Tweny) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimeters) diametres with prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as directed by the Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals

Providing and fixing 6mm (Six millimeters) thick plain cement bonded board ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) as per approved drawing, design and as directed by the Engineer-Incharge, including carriage of materials within all leads, lifts and other incidentals

Puneet Khosla