Danauli Phulwaria - Yard remodeling work for extension of CSL of lines at DPL station.

Item Breakup - 1-ANNEXURE - Z (Part-1) SOR ITEMS

Kilometre Total 220000.00 Supply and fixing of G.I. Pipe with threaded collars of 100 mm nominal bore specn. No. IS 1239 Item- 4 medium grade. Perforated of required length on bridge/below metalled road/L-Xing/Culvert as per technical specification of tender. S No. Item Description of Item Unit Qty Rate Amount No

the Inspection: Consignee

with materials Total 70000.00 Item- 5 Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91 S No. Item Description of Item Unit Qty Rate Amount No

Numbers 100.00 Total 25000.00

Item Breakup - 2-ANNEXURE - Z (Part-2) Non SOR-I ITEMS

Numbers 150.00 Total 19335.00 Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec. Item- 8 no. IRS-S-76/89. Material to be procured from RDSO approved firm only with performance guarantee. S No. Item Description of Item Unit Qty Rate Amount No

442.63 (Unit: "Numbers" should be understood "Coil")

50.00 (Unit: "Numbers" should be understood "Coil")

20.00 (Unit: "Numbers" should be understood "Coil") Total 168520.20

Item Breakup - 3-ANNEXURE - Z (Part-3) Non Schedule Items

Numbers Total 87476.06 SONPUR DIVISION-S AND T/EAST CENTRAL RLY "Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including laying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non- metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 3 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23002/A/M/ ADV. ALT-8 Item- 10 and as per spec. no. RDSO/SPN/194/2006 (VER- 1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/ 1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Installation, Erection & Wiring of signalling unit includes LED signal litghtening unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

Numbers Total 148145.30 "Installation, Erection & Wiring of CLS unit, Post, Ladder & Base, LED unit including paying out of tail cable from location box & earthing of CLS (LED type). This includes supply of non- metallic (FRP) colour light signal housing multi-unit type for Rly. signalling, suitable for RE area, 2 aspect complete without lenses, lamps and signal transformer as per drg. no. SA23003/A/M/ADV.ALT-8 and Item- 11 per spec. no. RDSO/SPN/194/2006 (VER- 1.0) or latest and FRP material as RDSO spec. no. RDSO/SPN/ 151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal should be compatible to 'LED' type. Installation, Erection & Wiring of signalling unit includes LED signal litghting unit including Curretnt Regulator & Health Monitoring unit. This also includes protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

Numbers Total 138886.20 "Installation, Erection and wiring of Junction Type Route Indicator (LED type). This includes supply of non- metallic (FRP) Junction Type Route Indicator for Rly signalling suitable for RE area without lamp, lenses, signal transformer as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. Item- 12 FRP material as per RDSO SPEC no. RDSO/SPN/151/1997 or latest. All drawings should be as per latest. Material to be procured from RDSO's approved firm only. Note:- Signal unit should be compatible to 'LED' type, Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghting unit . This also includes protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

drg. 23401(ADV)/ALT-2. (i) Execution

per 23401(ADV)/ALT-2. (ii) Supply. Inspection: Consignee

drg. 23403(ADV)/ALT-2. (i) Execution

per 23403(ADV)/ALT-2. (ii) Supply. Inspection: Consignee Total 190362.91 "Installation, Erection paying out of tail cable from location box and wiring of Calling-On signal/Guard repeater, LED unit on same post below Main signal. This includes supply of non- metallic (FRP) Calling-On signal housing unit type for railway signalling, suitable for RE area, without lense, lamp and holder, compatible to LED signal unit as per RDSO drg. no. SA24351/ADV or latest and as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. FRP material spec. as Item- 13 per RDSO/SPN/151/1997 or latest. This includes cost of protection cover (wire mesh guard of expanded metal of size 2 inch x 1inch) and mounting bracket with U-clamps nuts & washer. All drawings should be as per latest. Note:- Signal unit should be compatible to 'LED type. Installation, Erection & Wiring of signalling unit includes LED signal litghting unit This also includes protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

Numbers Total 23182.98 SONPUR DIVISION-S AND T/EAST CENTRAL RLY "Installation, erection, laying out of tail cable from LB and wiring of Shunt signal LED unit on the same post below the main signal as per technical specification. This includes supply of Non Metalic (FRP) Shunt signal unit (without lenses, lamps base, post and signal transformer) as per RDSO Drg. Item- 14 No. SA- 23840/ ADV/Alt-2 or latest.FRP material Spec No. as per RDSO/SPN/151/1997 or latest. Material to be procured from RDSO's approved firm only. NOTE:- Signal unit should be compatible to 'LED type. Installation, erection & wiring of signalling unit includes LED signal lighting unit . This also includes provision of offset bracket and protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

Numbers Total 33317.65 "Installation, Erection of Shunt Signal unit with base and post and paying out of tail cable from location box and wiring of shunt signal, LED unit as per technical spec. This includes supply of non- metallic (FRP) shunt signal housing multi-unit type (without lenses, lamps) with base & post and without signal transformer for Rly signalling suitable for RE area without lens, lamp & holder, Item- 15 compatible to LED signal unit as per RDSO drg. no. 23840/ADV/ALT-2 or latest and as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. FRP material spec. no. as per RDSO/SPN/ 151/1997 or latest. All drawings should be as per latest.Material to be procured from RDSO's approved firm only. Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghting unit This also includes protection of unit from rain water." S No. Item Description of Item Unit Qty Rate Amount No

Numbers Total 76629.64

Reinstatement of platform and repairing to orginal state after cable laying work.

Supply of PBT ARA terminal as per IRS SPECN No. IRS:S-75-91

Supply of Bakelite Strip/Sheet of Size (950 x 75 x 12) mm. for fixing 30 Nos. ARA terminals/ Fuse base terminals/Fuse base. Inspection: Consignee

"Supply of offset bracket for colour/position light signal (90/140 mm outside Dia) post 7 with U- clamps, nuts, washers complete as per RDSO DRG.No.SA 23080/ADV/ALT-1.(Dia will be as per site engineer.) Note- Proper size offset bracket for position light shunt signal to be supplied. Site engineer to give details of the off set bracket to the contractor." Inspection: Consignee

Casting, concreting and curing of foundation for Shunt signal and as per DRG.No. SGW/MGS/S1/91 including cost of all materials required for casting and concreting and provision of holding down bolts & nuts.

Casting,concreting and curing of foundation for Main signal and as per DRG.No. SGW/MGS/S1/91 including cost of all materials required for casting and concreting and provision of holding down bolts & nuts.

Supply of CLS Post 4.5 mtr. and Ladder 4.5 Mtr. with bases as per RDSO DRG.No. SA.5533/ADV and RDSO Spec. No.S6-81. Inspection: Consignee

Supply of CLS Post 3.5 mtr. And Ladder 3.5 Mtr. with bases as per RDSO DRG.No. SA.5533/ADV and RDSO Spec. No.S6-81. Inspection: Consignee

Supply of SLB/BSLB/SB for SLB/BSLB REF. RDSO DRG. No. SA-2373 (with latest amendment) as per site requirement. Inspection: Consignee

Casting,Concreting and curing of foundation & erection for SLB/BSLB/SB as per DRG.No.S&T/C-34 (NKG) including supply & fixing of holding down bolts & nuts.

Provision of Screen on signal by expanded metal (size 20 mm x 60 mm strand, 3.2 14 mm wide and 1.6 mm thick) as per instruction of site engineer incharge. This includes supply of all materials including earth electrode and earthing arrangement (supply and installation) Inspection: Consignee

Supply of Enamelled number plate P/G/C marker as per site requirement & instruction of Site incharge & as per standard practice in ECR. Inspection: Consignee

"Supply of point JB fitted with 18 Nos. 1 way ARA PBT terminal block conforming to 16 IRS - S- 75/91 with 3 Nos. of 40 mm Bore. GI pipe 600 mm long as per DRG No. SGW/MGS/PT4/91 fixed on hard wood plank with U-channel (75 x 40 x 1500) mm for fixing." Inspection: consignee & PBT terminals- RDSO

Supply of complete ground fittings for point machine, including insulated stretcher Bar Switch extension piece etc. and all other accessories required for installation. i) For IRS point machine (Spec.IRS -24/2002) a) Turn out (RDSO DRG. No. SA - 8800-01). Inspection: Consignee

"Casting, Concreting and Curing of foundation and erection for full apparatus case (GKP-type) as per DRG No. SGW/MGS/L1/91 including cost of all materials required for fixing holding 18 down bolts, casting, concreting and fixing of ""E"" type lock. Note:- (i) The contractor will provide holding down bolts. (ii) Bottom of appratus cases should be filled with sand and the top surface covered with masonry work and neat cementing. (iii) E type locks to be fixed as per instructions of site Engineer."

Fixing,wiring of terminal strips, bakelite strip, transformers, relays fuses with base 19 and supply and fixing of shelves for full apparatus case with termination earthing of cable and wiring with lettering as required including supply of wires and micsellenous materials,sand filling and plastering over sand filling per location.(All materials except transformers, relay, terminal strips,bakelite strip and fuses with base to be supplied by the contractor.).

Supply of CT rack (DRG.N0.S&T/C-9/2001/ER) complete with all fittings including 8 way PBT terminals as per Spec.No.IRS-79/92. Inspection: consignee & PBT terminals-RDSO

Installation of cable termination Rack with scaffolding materials; ladder for supporting outdoor cable; wire guide; complete with other necessary hardwares as per requirements of Rly. & erection materials. ii) 6 to 8 Line Station

Supply of relay racks to accommodate 100 relays complete with all fittings as per ER.DRG.No.S&T/C-20/ 2001. Inspection: Consignee

Installation and wiring of relay rack as per CSTE/ ER's DRG. No. S&T/7/90 and as per IRS:S-36/87 fixing transformers and supply and installtion of fuses; Diodes; resistances; condensors; terminal strips/ tag blocks; busbar & other equipments required for the approved system design complete with scaffolding materials & required hardware & errection materials (Station wise quantity to be specified by tenderer) Note: 16/0.2 MM PVC wire to be supplied by contractor. Wire to be procured from the RDSO approval firms and inspected by RDSO.

Preparation of cable route plan, cable core chart , power supply layout, cable termination chart in relay room and location box. Location wiring plan, cable insulation chart, fuse 24 analysis, equipment disposition plan, track bonding plan, as per railways practice.I) All the above plans for end bunglow also to be submitted.All diagrams/plans to be submitted in polyester film tracing to the railways along with 6 sets of ferro prints of the above.The diagrams/ plans should also be submitted in soft copy in editable autocad/pdf format through USB media..b) 5 to 8 line station.

Supply of earth electrode.Materials to be procured as per E.Rly Sketch No.SGW/T/3/G/8/89. Inspection: Consignee

Fixing of Earth electrode including earth wire as per DRG. No. S&T/C-41(NKG) for aparatus cases, signal post and other equipment as per instruction of site engineer all materials except earth electrode shall be supplied by contractor required for exectuion of the work. Above/

2-ANNEXURE - Z (Part-2) Non SOR-I ITEMS 2764163.16 Below/P

Supply of full size location box as per design of GKP signal workshop. Inspection: Consignee

"Supply of E-type lock without key, spec . no. IRS-S-30, Drg.no.S-3376/M key-S- 3377/M. Individual number of miniature E locks and Normal size of locks required at site & ward of E- type lock to be decided by the site engineer as per site requirement." Inspection: Consignee

Supply of Non deteriorating type low voltage cartridge fuse as per Spec. No. IRS/S/78/92. Round head type.

Supply of slotted angle (40 x 40 x 2 mm) Inspection: Consignee

Supply of paper base hylum sheet 12 mm thick. Inspection: Consignee (Unit: Sqm should be understood Sq Mtr.)

Supply of PVC wire coil of size of colours as per instruction of site engineer in 100 mtr. Coils. Spec. no. IRS-S-76/89. Material to be procured from RDSO approved firm only with performance guarantee.

Supply of MS number plate (200 mmx300 mmx3 mm ) with fixing clamps. Letter shall be of black colour in the white back ground. Details of description shall be given by site engineer. The plate & clamps shall be painted before lettering of signal numbers. Inspection: Consignee

Installation, commissioning & testing of LED Signal as per instruction of site engineer & as per site requirement. (Unit: "Numbers" should be understood "Per aspect")

Fixing of P/G/C/IB marker with complete fittings as per instruction of site engineer & as per site requirement..

"Filling earth around location box/signal post for a width of 0.5 m on all sides, upto a level of 150 mm below the foundation top. This work includes consolidation of earth by watering." (Unit: "Cum" should be understood "Per Cu. Mtr.")

Inter connection wiring with ladder arrangement from power supply equipment to relay rack, IPS, Data logger,Control panel, Block instruments, CTR etc. It also includes interconnection wiring with ladder arrangement between relay racks, CTR's, indication board and 13 block instruments.This also includes termination of cables/wires on all the above and dressing, bunching etc. as required at site.Wire shall be 16/0.2 mm for relays, 3.0737 mm for MCB's and 7/0.75 mm for power wiring. Indoor cable 60 x 0.6 mm/40 x 0.6 mm as per IRS-S-76/89 or Latest for interconnection of indication board. Wires shall be procured from RDSO approved firm and inspected by RDSO for PVC wire.

Carrying out alterations to the existing relay wiring at relay rack/location as per the 14 circuit diagram.The work includes releasing the existing unused wires and wiring the relays using wire PVC 16/0.2 mm copper.{Wire PVC 16/0.2 mm copper, paint,soldering materials and all other miscellaneous materials required for the work shall be supplied by the contractor.)

Lettering & numbering of details and description writings of particulars of termination and equipments on relay rack, relays, cable termination rack, etc constituting entire system with 15 contractors own paint and writing materials. ("Asian" make enamel paint only to be used.).This includes supply & fixing of Teflon strips 3mm thick and 25 mm wide for each row of relays and cable terminations. The work shall be done as per extant practice on ECRly and instruction of Rly engineer at site. (Unit: "Rack" should be understood "Per Rack")

Termination of cable cores on ARA terminals or on 8 way terminals in the cable 16 termination rack. This includes all associated works of pulling out the cable from under ground, Peeling off insulation, dressing of cable core supported on sting rod with contractors own materials as per instruction of the site incharge. The cable armour to be earthed. Cable tags to be provided. (Unit: "CORE" should be understood "Per CORE")

"Supply of tools & plants, measuring instruments. Each set containing the following items i) Cutting plier (Taparia make) 200 mm insulated. = 1 no. ii) Nose plier round insulated, 150 mm (Taparia make) = 1 no iii) Screw diver adjustable with common handle for different screw diver (Taparia make) = 1 no. iv) Spanner double ended, 33 mm = 1 no. v) Hammer ball pans, 1.5 lbs = 1 no. vi) Electric soldering iron (Philips/Soldron make), 230 V, 60 Watt. = 1 no. vii) Wire cutter insulated (Taparia make) = 1 no x) Spanner set double end (Chromium plated, (Taparia make) = 1 17 no. ix) Wrench adjustable sf 305 mm (Taparia make)=1 no. x) Spanner double ended, 25 mm = 1 no. xi) Megger, 0-500 volt (Motvani/Shanti make)= 1 no xii) Digital multimeter with following range= 1 no. a) 0-1000V AC/DC b) 0-10 Amp c) 0-1000 Ohms 3-1/2 digits The meter shall be supplied with test probes, leather cover battery and of reputed make like Philips/Meco or similar. xiii) Box spanner insulated 1/4 inch x 3/8 inch = 1 no. xiv) Box spanner insulated 3/8 inch x 1/2 inch = 1 no. xv) True RMS digital multimeter of 4 1/2 digits capable of measuring (i) 10 Amp AC and DC current (ii) True RMS voltage with a bandwidth of 5 Khz. Similar to Escorts 97 or Fluke. xvi) Drill bits 7 mm - 7 nos. " (Inspection: Consignee

3-ANNEXURE - Z (Part-3) Non Schedule Items

Excavation of trench in all kinds of soil and refilling of trenches (1 Mtr. Depth 300 mm width) Above/

Exacavation of trenchless track under Railway Track/Busy Road etc. at depth culvert/River, (IN HDD portion) laying of 100 mm die GI PIPE of medium grade in it (GI Pipe shall be supplied by the contractor). Note:- Pipe inspection by consignee. Above/

Supply of Thermo Shrink Jointing kit for Jointing underground Quad cable [ 0.9 mm dia of conductor] as per RDSO specification no. IRS:TC:77/2012 Rev.3.0 with amdt.1 to 2 or latest. Inspection: RDSO Above/

Installation of Thermo Shrink Jointing Kit {Spec.No.IRS:TC 77/2012(Rev.3.0) Amdt.3) for jointing underground Six Quad Cable for straight through cum derivation joints with VF transformer. Above/

Supply of split DWC pipe with the socket / couplar and T joint where ever required, (size of outer dia 300 mm / inner dia 260 mm.) Inspection: RITES Above/

Installation of split DWC Pipe as per site requirement & as per instruction of site engineer incharge. Above/

Transportation of HDD machine with accessories including handling of stores materials, preparation of site and boring of 110 mm dia HDPE PIPE of size 63/40 mm in single /double /triple etc required for crossing /laying of railway cables in a combination of quad & signalling cables etc. as per required comprising maximum 72 cores in any HDD section on land /bridges/culverts /track/pucca road crossing and blowing /pulling of Quad /signalling cables etc. 7 within HDPE pipe. Boring of trench shall be (one) Mtr below the track to 1.5 (one point five) minimum 3 (three) meter below the river bed, 01 meter below other lands including road/pucca road 63/40mm dia & its accessories suitable for HDT as permanently lubricated HDPE pipe of size 63/40 crossing area. This includes supply as per Specification No. RDSO/SPN/TC/45/2013 with latest amendment & cost of the fuel and all other items which will be required for laying of cable through it. Note- The number of HDPE pipes(of any dia as mentioned above ) to be pulled in any HDD section will depend upon the numbers of quad /signalling cables to be pulled through that HDD section asper site requirement. At a particular site, the second /additional HDD is to be done only after completing the pulling of 72 cores of cable through 1st HDD other wise the second/additional HDD will not be counted as a new /additional HDD for the purpose of billing. (consignee for supply portion) Above/

"Installation, Erection of Shunt Signal unit with base and post and paying out of tail cable from location box and wiring of shunt signal, LED unit as per technical spec. This includes 15 supply of non-metallic (FRP) shunt signal housing multi-unit type (without lenses, lamps) with base & post and without signal transformer for Rly signalling suitable for RE area without lens, lamp & holder, compatible to LED signal unit as per RDSO drg. no. 23840/ADV/ALT-2 or latest and as per RDSO spec. no. RDSO/SPN/194/2006 (VER-1.0) or latest. FRP material spec. no. as per RDSO/SPN/ 151/1997 or latest. All drawings should be as per latest.Material to be procured from RDSO's approved firm only. Note:- Installation, Erection & Wiring of signalling unit includes LED signal litghting unit This also includes protection of unit from rain water." Above/

Supply of Plastic Cover for 2 Aspect Signal Unit as per technical specification attached. Note:-Before supply, sample must be approved by consignee & controlling officer. Inspection: Consignee Above/

Supply of Plastic Cover for 3 Aspect Signal Unit as per technical specification attached.Note:-Before supply, sample must be approved by consignee & controlling officer. Inspection: Consignee Above/

Supply of Plastic Cover for 4 Aspect Signal Unit as per technical specification attached. Note:-Before supply, sample must be approved by consignee & controlling officer. Inspection: Consignee Above/

Supply of MSDAC Record Books both side Printing (20 Page) and bounding size Length 8'' width 5''.Note- Supply should be as per instruction of Site incharge & as per standard practice in ECR. Sample must be approved by consignee & controlling officer before supply. Inspection: Consignee (Unit: "Numbers" should be understood "Booklet") Above/

"Supply of Printed and Binded of IPS Record LSC/ECU Indoor both side printing 50 20 Page and Bounding Size Width-11"", Height- 8"", Battery Record LSC/ECU Indoor both side printing 50 Page and Bounding Size Width-11"", Height- 8"",Signal Failure Memo Book Size 6'' Long 4"" Width of 100 Page printed with duplex top binding. Note- Supply should be as per instruction of Site incharge & as per standard practice in ECR. Sample must be approved by consignee & controlling officer before supply." Inspection: Consignee. (Unit: "Numbers" should be understood "Booklet") Above/

Supply & Erection of passenger/Goods Warning Boards as per Drg.No.SA 2380 ADV with reflecting strips as per instruction of Site incharge & as per standard practice in ECR. Inspection: Consignee Above/

Supply of Key Lock Relay (KLCR) (Neutral relay) to work on 24V DC 2F/2B with 1 Key and 2 Ward along with housing suitable for mounting 1 no. Key lock relay with push button, LED indication complete. Note- Material should be supplied along with Test certificate from OEM and his warranty certificate. Inspection: RDSO Above/

Installation of KLCR lock relay assembly as per direction of concerned engineer Above/

Supply of Smart Cabinet/Rack for Housing of Various S&T equipments like KLCR, Reset Box, IPS Indication Panel, CAVA Unit for FACS, SPAU for Point Reversal, Crank Handle, Quad Cable Earth Sensing Unit along with Fixing of KLCR(KLCR will be provided by Railway) as per instruction of Site Engineer, Make- RITTAL,SANTEL, VERO PRESIDENT or similar. Inspection: Consignee Above/

Supply of hand cuff locks with keys. Above/

Supply of Terminal Blocks as per following specifications:- Supply of 4 Conductor Disconnect Terminal Block for test and measurement 0.08 mm² - 2.5 mm² center marking with test slot for test plug 2 mm/0.079 in and 2.3 mm/0.091 in carrier rail din35 front entry cage clamp connection grey WAGO or Similar as per RDSO Spec. No. RDSO/Spn/189/2004 Ver. 3.0 or Latest. Inspection: RDSO Above/

Supply of Terminal Blocks as per following specifications:- Supply of End and Intermediate plate 2.5 mm/0.098 in thick WAGO or similar as per RDSO Spec. No. RDSO/Spn/189/2004Ver. 3.0 or Latest. Inspection: RDSO Above/

Supply of Terminal Blocks as per following specifications:- Supply of steel carrier rail 35x7.5 mm, 1 mm/0.039 in thick unslotted, yellow with chrome WAGO or similar as per RDSOSpec. No. RDSO/Spn/189/2004 Ver. 3.0 or Latest Inspection: RDSO Above/

Supply of Terminal Blocks as per following specifications:- Supply of Screwless End stop 10 mm/0.394 in wide carrier rail din 35, grey WAGO or similar as per RDSO Spec. No.RDSO/Spn/189/2004 Ver. 3.0 or Latest. Inspection: RDSO Above/

"Supply of PVC flexible copper cable single core multistrand 1 x 10 Sq.mm (80 conductor each diameter 0.40 +/-0.01) as per IS 694/2010 with latest amendment if any with insulation thickness of 1.0 mm nominal conductor resistance 1.91 ohms/Km and test parameters are as per IRS (S)76/89 (Amd.3). Inspection: RDSO Above/

Modification and alteration to Existing Panel Interlocking MACLS station for interconnection wiring with station for interconnections wiring with panel, Relay Room Equipments and Power Supply Equipments, Battery Room, SM/ ASM Rooms, Outdoor Equipments, Termination in Relay Rooms Equipments Terminals, CT Racks, HV Racks (If required) and Rack to Rack wiring etc as per approved Signalling plan & Circuit Diagrams. Above/

"Modification and alteration to Existing of panel face diagram as per spec.no. IRS-S- 32 36-87 with modifications, dt. 05-7-94 of CSTE/E. Rly. Domino type control Panel Spec no.:- RDSO/SPN/186/2004 (Latest) Note: After getting approval of the above diagrams from railways,the diagram is to be submitted in polyester film tracing along with 6 sets of ferro prints of the same. Out of this, 2 set to be submitted in laminated plastic cover and in soft copy in editable autocad/pdf format through USB media also. " (a) Up 4 to 8 Lines Stations. Above/

Supply and fixing of MS FLAT size 32mm *5 mm as Earth lead on Location boxes and Interlocked LC gates. All required material will be supplied by the contractor. Inspection Consignee Above/

Supply and installation of earth electrodes including MS flate for signaling equipment such as lever frame, apparatus case, signal, relay rack, block instrument, etc. as per instruction of site engineer. Earth measurement will be done jointly. The record of the earth will be submitted by the contractor to the site engineer. Inspection: Consignee Above/

Supply, Installation, Testing & Commissioning of Earth Leakage Detector for monitoring different AC & DC supplies Multichannel (12 channel) conforming to RDSO /SPN/256/2002 with latest amendments as per technical specification attached. inspection: RDSO Above/

Arrangement of Battery operated Rail Core Drill along with additional 18mm TCT Rail Core Drill, Maximum core cutting capacity: 36 mm, Rated speed: 250/450 RPM, Battery type:Li-on, Battery voltage: 50 Volt, Battery pack capacity: 4 AH, Numberof Battery supplied: 2 Nos, Number of Charger supplied: 1 No, Special design pressurized Internal spindle cooling to give maximum life of core cutter and to avoid heating of the rail.Time taken to drill one hole of 32 mmin 60 KG 90 UTS rail section less than one minute. Time taken to fix the machine on the rail, less than 2minutes and to de-clamp less than 1minute. 34 Number 32 mm diameter hole with full charge batteries (17 hole per battery) in 60 Kg 90 UTS rail section. 3 Sets of standard center rail drilling adapters for gauge 90, 52, 49 provided along with machine. Weight of machine with battery: 18.5 KG, Make: Eibenstock. Bosch, KPTL. Inspection : Consignee) Above/

Supply of GI-Cover for Point Machine Point Machine Inspection: Consignee Above/

Supply of Indoor power cable of 4 sq mm size as per IS 694-1990 or latest as per technical specification attached. . Colour Code decided by as per Site engineer. Inspection: Cosnignee Above/

Supply of indoor power cable of size 2.5 Sq.mm as per IS 694-1990 or latest as per technical specification attached.Colour Code decided by as per Site engineer. Inspection: Consignee Above/

Supply of 35 sq mm Multistrand Single core PVC insulated Copper Cable as per IS:694 for connecting Main Earth Electrode to MEEB in the equipment room in duplicate. Inspection: Consignee Above/

"Supply of basic material to construct unit maintenance free earth as per RDSO Specs.No. RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No. SDO/ RDSO/E&B/001dtd.19.09.08 . It consist of following: (i) Copper bonded steel electrode of 3.0 m long,17.2 mm dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (ii) Earth enhancement material supplied in sealed bags of minimum 10kg = 3 nos. (iii) Copper 41 strip of 150x25x6 mm, to terminate earth rod= 1 no. (iv) Copper strip of 300x25x6 mm (MEEB)= 1 no. (v) Copper strip of 150x25x6mm (SEEB) = 1 no.(vi) Supply of 35 sq. mm multistrand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (vii)Supply of 16 sq. mm multistrand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB(minimum 10 meter ) (viii)Supply of 10 sq. mm multistrand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (ix) Supply of copper lug sleeve for 3/16 cable Note;- . RDSO latest TAN No. STS/E/TAN/3006 Ver.3.1, dtd. 30.6.2025 or latest will be applicable & followed by the firm. " Inspection: RDSO Above/

Installation of Unit Maintenance Free Earth as supplied. It includes ( i )Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth en hancing compound(Approx.30 Kg) (iv) Provisionof exothermic weld connections to copper tape of 25 mm x 6mm x 200 mm to the earthelectrodes. All material tools and features required for weld will be arranged by contractor.(v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3 inch thickness. Cables 35 Sqmm/ 16 Sq mm/10 sq mm for connecting earth to busbar,busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper and outer surface(minimum copper bonding thickness of 250 micrones to made requirement of underwriter's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300mm x 25 mm x 6 mm for main equip- potential busbar,copper strips of 150 mm x 25mm x 6 mm sub equipotential busbar in relay room, power room and panel room. Copper strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode.Inspection chamber of site 300mm x300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover theearth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO Specn.No.RDSO/SPN/197/2008 or latest and conforming to RDSO Drg.No.SDO/RDSO/E&B/001 or latest & as per RDSO TAN 3006 ver 3.1 dt. 30.06.2025. Above/

Preparation of Station Working Rule (SWR) in English & Hindi based on approved SIP, 43 ESP etc as per the extent practice being followed in E.C. Railway. The contractor should supply two paper print of SWR as draft for approval and comments. Once the approval is given he shall supply two paper prints of the SWR for final approval and signature of the concerned officials on obtaining the final approval the contractor shall supply 10 sets of the SWR duly photo copies from the original signed off copies of SWR. The approved SWR shall be finally supplied in soft copy in editable word/ pdf format through USB media. Above/

Preparation & printing of Station Working Rule Diagram (SWRD) on AUTOCAD based 44 on approved SIP, ESP etc. as per the extant practice being followed in E.C.Railway. Contrctor shall supply one print of the SWRD (paper print Size as requird) as draft for approval and comments.Once the approval is given shall tracing of the SWRD on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval, the contractor shall supply 10 copies blue print of the tracing.The approved SWRD shall be finally supplied in soft copy in editable autocad/pdf format through USB media. Above/

Designing and preparation of SIP to the scale through Autocad software. Contractor 45 shall supply one print of the SIP as draft for approval and comments. Once the approval is given, contractor shall provide the tracing print of the same on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval, the contractor shall supply 10 copies paper print of the tracing after completion of the work.The approved SIP shall be finally supplied in soft copy in editable autocad/pdf format through USB media. Above/

Designing and preparation of Selection Table through Autocad software. Contractor 46 shall supply one print of the ST as draft for approval and comments. Once the approval is given, contractor shall provide the tracing print of the same on good quality flim paper of thickness not less than 75 micorns for signature of all officials. On approval, the contractor shall supply 10 copiess paper print of the tracing after completion of the work.The approved ST shall be finally supplied in soft copy in editable autocad/pdf format through USB media. Above/

Supply, Installation, Testing & commissioning of complete Automatic Fire Detection & Alarm System (AFDAS) for signaling installation as per RDSO spec. no. RDSO/SPN/217/2018 Ver.2.0 or latest & as per attached technical specification consisting of 01 no.Control panel, 01 Flasher,1 no. hooter, 6 nos. smoke detectors, 06 nos heat detector and 01 no. Manual call point. Note:-The system shall be approved by UL or FM or Vds or LPCB. Inspection: RDSO Above/

"Supply and installation of CO2 type fire extinguisher capacity 4.5 Kg capacity ISI Mark IS: 15683 operating temperature (-30°C to +55°C) for class 13 B type of fire with 1 mtr. Hose pipe fitted with PVC bent horn complete in all respect as per technical specification attached. Note:- BIS certification & Testing certification of NABL accredited Lab must be submitted by tenderer along with supply. " Inspection: Consignee Above/

"Supply, Installation, testing and commissioning of single channel laser or High power LED based Aspiration detection unit (for AC room) with area covering 5000 sq. ft.with 49 programmable 4 stage alarm generation and with 4 addressable modules. It should have auto cleaning facility in optical chamber, electronic discrimination of particle size, ultrasonic air flow sensing auto learn feature with TCP/IP network capability, the aspiration system shall also include external power supply unit with battery backup. Note- Approval- UL/LPCB/VDS listed (document of approval must be submitted along with supply) and shall comply to specification No. RDSO/SPN/217/ 2021 Ver-3 or latest. " Inspection: RDSO Above/

"Supply, Installation, Testing & Commissioning of UL/LPCB/VDs Listed CPVC pipe 25 mm Dia & Pipe Accessorises for the Aspiration Detection complying to the RDSO/SPN/217/2021 Ver-3 or latest. Note:- Approval - UL (document of approval must be submitted along with supply) " Inspection: RDSO Above/

Supply, Installation, Testing & Commissioning of Analog Addressable Type Output/Control Modules with Inbuilt Fault Isolator or Alternate arrangement which shall isolate the module in case of short circuit. The Module should have Programmable supervised & Unsupervised output. The Module should have visual indication for its operation, Approval - UL/LPCB/VDS Listed and Shall comply to RDSO/SPN/217/2021 Ver 3 or Latest. Inspection: RDSO Per Above/

Supply, installation and commissioning of Multi Section Digital Axle Counter [MSDAC] 52 complete set with all accessories consisting of complete indoor and outdoor equipment including reset box ,Central evaluator and monitoring console as per RDSO Specification No. RDSO/SPN/176/2013 Ver. 3 with latest amendment/revision of required track section and detection points including transportation of materials at Site as per attached technical specifications.(Make- Frauscher or similar make of RDSO approved OEM) Inspection: RDSO

4-ANNEXURE - Z (Part-4) Telecom Items

Laying/blowing/ drawing of Quad/PIJF cable in the trench. As per specification attached. Above/

Supply of thermo shirnk jointing kit for jointing of underground Quad cable (0.9 mm dia) as per technical specification No.IRS:TC-77/2012 rev-3.0 amdt.-3 or latest. Inspection: Consignee Above/

Installation of Thermo Shrink Jointing Kit {Spec.No.IRS:TC 77 / 2012(Rev.3.O)Amdt.3) for jointing underground Six Quad Cable for straight through cum derivation joints with VF transformer. Above/

Supply of 20 pair CT box (Metal box) with Wago terminal type. Inspection: Consignee Above/

Fixing of 20 pair CT box and termination of cable at the site/station/L.C. gate etc. This includes fixing of PIJF cables and C.T. box on the wall with necessary wooden plank and PVC pipe for entire length of the cable inside the room. Inspection: Consignee Above/

Excavation of trench in all kinds of soil and refilling of trenches (1 Mtr. Depth 300 mm width). Above/

Supply of 24 fibre armoured mono mode optical fibre cable as per RDSO Specification No.-IRS.TC/55/2006 Rev-1.0 Amnd-3 or latest. Inspection: Consignee Above/

Laying of HDPE duct in the trenches, including in HDD/Manual Boring and supply pulling of Nylon rope through it at different places as per direction of Engineer incharge/ site Engineer. It includes Supply of HDPE duct outer dia 40mm & inner dia 33mm as per TEC Gr No. G/CDS-08/02 Nov /2004 with latest amendment with end cap to be provided along with the drum at both ends. Above/

Blowing/Drawing of OFC cable in the HDPE duct by mechanical system through the HDPE duct already provided in the excavated treanch as per approved cable route plan taking due care while transporting and sealing both ends after laying. Work will be done as per technical supplement. Above/

Supply and installation of OFC joint closure with all accessories for jointing of 24 fibre OFC as per TEC specification no G-OJC- 02/01 May 99. The Splice loss shall not be more than 0.1dB, Make- Andatel/Techroute/ Intelco technochip or Similar Inspection: Consignee Above/

Switch 8 port unmannageable. Inspection: Consignee Above/

2 Mbps leased line Modem as per TEC Spec. No. IR/DCA-18/04, Oct.2005 each pair consisting of one V.35 unit and one G.703 unit. Inspection: Consignee Above/

Supply of four port media Converter 100 Mbps OFC port SC Connector driving distance 15 KMs on single mode fiber with four 10/100 mbps. Ethernet port and internal AC supply Make-MROTEK Model FABIO 104L/SA/SMIS/AC or similar. Inspection: Consignee Above/

Supply and installation of Audio Amplifier similar to Ahuja Model SSA-250 or better make, workable on AC: 220-240 V 50/60 Hz Dc :24V (2x12V car Battery DC supply with protection against wrong battery polarity connections in the control console, as directed at site. FIRMS OFFER:M AKE : HITONE BOSS, MODEL : SSA300M Inspection: Consignee Above/

Supply and Installation of 10 meter HDMI cable.(Inspection byconsignee) Above/

Supply of RJ-45 Connector for networking Inspection: Consignee Above/

Supply of HDMI Splitter 1 in 8 Out with Video Resolutions up to 4K@ 30hz, EDID Management, 10.2 Gbps Video Bandwidth and Plug and Play Inspection: Consignee Above/

Annealed tinned Electrolitic high conductivity copper multi Stand flexible conductor. size: 2 core x 1.5 sqmm. Make- AVERCAB or similar. Inspection: Consignee Above/

Supply of CCS (Counter Communication System) at various station of SEE Division with defined specification. Inspection: Consignee Above/

Installation, testing, commissioning including all necesary electrical wiring, telecom cabling, provision of accessories required for commissioning of system as a whole. Inspection: Consignee Above/

Supply, installation, testing & Commissioning of Full HD LED TV/Large Format Display Monitor(55 inch) suitable for 24x7 operation with HDMI ports complete with all accessories and HDMI cables, as per Sppecification attached. Inspection: Consignee Above/

Supply of microphone with stand. Inspection: Consignee Above/

Supply of Cordless microphone Similar to Model no.-AWM 490V2 of Ahuja-Make. Inspection: Consignee Above/

Supply of column speaker 15 Watt with line matching transformer make Ahuja or Philips. Inspection: Consignee Above/

Supply of 15 watts Hornspeaker with 10 watttapping, matchingtransformer and driver unit.Inspection- Consignee Above/

Supply of PVC pipe 1" diameter or better of ISI marked. Inspection: Consignee Above/

Laying of power/data/OFC/Screened cable through PVC pipe. (PVC pipe will be supplied by Railway).